Fire hazard in transportation infrastructure: Review,assessment, and mitigation strategies

This paper reviews the fire problem in critical transportation infrastructures such as bridges and tunnels. The magnitude of the fire problem is illustrated, and the recent increase in fire problems in bridges and tunnels is highlighted. Recent research undertaken to address fire problems in transportation structures is reviewed, as well as critical factors governing the performance of those structures. Furthermore, key strategies recommended for mitigating fire hazards in bridges and tunnels are presented, and their applicability to practical situations is demonstrated through a practical case study. Furthermore, research needs and emerging trends for enhancing the “state-of-the-art” in this area are discussed.     

Development of docetaxel nanocapsules for improving in vitro cytotoxicity and cellular uptake in MCF-7 cells

The aim of this study was to fabricate docetaxel loaded nanocapsules (DTX-NCs) with a high payload using Layer-by-Layer (LbL) technique by successive coating with alternate layers of oppositely charged polyelectrolytes. Developed nanocapsules (NCs) were characterized in terms of morphology, particle size distribution, zeta potential (ζ-potential), entrapment efficiency and in vitro release. The morphological characteristics of the NCs were assessed using transmission electron microscopy (TEM) that revealed coating of polyelectrolytes around the surface of particles. The developed NCs successfully attained a submicron particle size while the ζ-potential of optimized NCs alternated between (+) 34.64?±?1.5 mV to (?) 33.25?±?2.1 mV with each coating step. The non-hemolytic potential of the NCs indicated the suitability of the developed formulation for intravenous administration. A comparative study indicated that the cytotoxicity of positively charged NCs (F4) was significant higher (p?in vitro on MCF-7 cells. Furthermore, cell uptake studies evidenced a higher uptake of positive NCs (≥1.2 fold) in comparison to negative NCs. In conclusion, formulated NCs are an ideal vehicle for passive targeting of drugs to tumor cells that may result in improved efficacy and reduced toxicity of encapsulated drug moiety.     

Experimental evaluation of machinability performance of CNT coated HSS tool during turning of titanium alloy

Journal of Mechanical Science and Technology - The present research deals with the deposition of carbon nanotubes (CNT) over the HSS tool, and to evaluate the machining performance of the coated...     

Performance of insulated FRP-strengthened concrete flexural members under fire conditions

This paper presents the results of fire resistance tests on carbon fiber-reinforced polymer (CFRP) strengthened concrete flexural members, i.e., T-beams and slabs. The strengthened members were protected with fire insulation and tested under the combined effects of thermal and structural loading. The variables considered in the tests include the applied load level, extent of strengthening, and thickness of the fire insulation applied to the beams and slabs. Furthermore, a previously developed numerical model was validated against the data generated from the fire tests; subsequently, it was utilized to undertake a case study. Results from fire tests and numerical studies indicate that owing to the protection provided by the fire insulation, the insulated CFRP-strengthened beams and slabs can withstand four and three hours of standard fire exposure, respectively, under service load conditions. The insulation layer impedes the temperature rise in the member; therefore, the CFRP–concrete composite action remains active for a longer duration and the steel reinforcement temperature remains below 400°C, which in turn enhances the capacity of the beams and slabs.     

Test methods for characterizing concrete properties at elevated temperature

Fire resistance of structural members is dependent on the thermal and mechanical properties of constituent materials and these properties vary as a function of temperature. Currently, there are limited standardized test procedures for evaluating thermal and mechanical properties of construction materials at elevated temperatures. This paper provides a review and assessment of test methods and procedures for evaluating high temperature thermal and mechanical properties of concrete. The drawbacks and variations in currently available test procedures and methods in standards are discussed. Recommendations on the most suitable methods and procedures for measuring thermal and mechanical properties at elevated temperature is presented. In addition, applicability of the proposed high temperature test methods and procedures is illustrated through a case study on conventional concrete specimens. Further, the need for developing standards by organizations such as American Society for Testing and Materials (ASTM), with standardized specifications and test procedures for measuring high temperature properties of construction materials, is laid out.     

Mobile data offloading based on minority game theoretic framework

Wireless Networks - Mobile data offloading is a current-day networking paradigm to channelize certain fraction of the cellular data traffic over unlicensed spectrum of WiFi. In this paper, we...     

Dufour and Soret influence on MHD boundary layer flow of a Maxwell fluid over a stretching sheet with nanoparticles

An analysis has been carried out to examine the heat and mass transfer properties of a two-dimensional incompressible electrically conducting Maxwell fluid over a stretching sheet in the existence of Soret, Dufour, and nanoparticles. In many practical scenarios, such as the polymer extrusion process, the problem presented here is crucial. The flow is examined in terms of the impacts of magnetohydrodynamics and elasticity. Brownian motion and thermophoresis are incorporated into the transport equations. Using adequate similarity variables, the governing partial differential equations and related boundary conditions are non-dimensionalized. The fourth–fifth-order Runge–Kutta–Fehlberg procedure is utilized to solve the consequent transformed ordinary differential equations. The effects of various embedded thermo-physical parameters on the fluid velocity, temperature, concentration, Nusselt number, and Sherwood number have been determined and discussed quantitatively. A comparison of a special case of our results with the one previously reported in the literature shows a very good agreement. An increase in the values of Du and Sr leads to an increase in the temperature and concentration distribution. Nusselt number estimates decrease as Nb estimations increase. Furthermore, this study leads to the study of different flows of electrically conducting fluid over a stretching sheet problem that includes the two-dimensional nonlinear boundary equations.     

Hydroxyoctadecadienoic Acids Regulate Apoptosis in Human THP‐1 Cells in a PPARγ‐Dependent Manner

Macrophage apoptosis, a key process in atherogenesis, is regulated by oxidation products, including hydroxyoctadecadienoic acids (HODEs). These stable oxidation products of linoleic acid (LA) are abundant in atherosclerotic plaque and activate PPARγ and GPR132. We investigated the mechanisms through which HODEs regulate apoptosis. The effect of HODEs on THP‐1 monocytes and adherent THP‐1 cells were compared with other C18 fatty acids, LA and α‐linolenic acid (ALA). The number of cells was reduced within 24 hours following treatment with 9‐HODE (p < 0.01, 30 μM) and 13 HODE (p < 0.01, 30 μM), and the equivalent cell viability was also decreased (p < 0.001). Both 9‐HODE and 13‐HODE (but not LA or ALA) markedly increased caspase‐3/7 activity (p < 0.001) in both monocytes and adherent THP‐1 cells, with 9‐HODE the more potent. In addition, 9‐HODE and 13‐HODE both increased Annexin‐V labelling of cells (p < 0.001). There was no effect of LA, ALA, or the PPARγ agonist rosiglitazone (1μM), but the effect of HODEs was replicated with apoptosis‐inducer camptothecin (10μM). Only 9‐HODE increased DNA fragmentation. The pro‐apoptotic effect of HODEs was blocked by the caspase inhibitor DEVD‐CHO. The PPARγ antagonist T0070907 further increased apoptosis, suggestive of the PPARγ‐regulated apoptotic effects induced by 9‐HODE. The use of siRNA for GPR132 showed no evidence that the effect of HODEs was mediated through this receptor. 9‐HODE and 13‐HODE are potent—and specific—regulators of apoptosis in THP‐1 cells. Their action is PPARγ‐dependent and independent of GPR132. Further studies to identify the signalling pathways through which HODEs increase apoptosis in macrophages may reveal novel therapeutic targets for atherosclerosis.     

Hybrid Organic/Inorganic Nanostructures for Highly Sensitive Photoelectrochemical Detection of Dissolved Oxygen in Aqueous Media

Precise, reliable, and remote measurement of dissolved oxygen in aqueous media is of great importance for many industrial, environmental, and biological applications. In particular, photoelectrochemical sensors working in differential mode have recently demonstrated promising properties, in terms of stability, sensitivity, and application potential. Here, a new approach is presented, combining visible light sensitivity, efficient photocurrent generation, and solution‐processed fabrication methods of conjugated polymers, with charge carriers selectivity, energetic alignment favorable to efficient interfacial charge transfer and high surface area achievable by using metal oxide nanostructures. Extensive characterization and optimization of the hybrid organic/inorganic system are carried out, leading to the realization of an oxygen sensor device, based on nanostructured palladium oxide/poly[(9,9‐dioctylfluorenyl‐2,7‐diyl)‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole]/[6,6]phenyl‐C61‐butyric acid methyl ester (PdO/APFO‐3:PCBM) as materials of choice. State‐of‐the‐art sensitivity, amounting at ?5.87 μA cm^?2 ppm^?1, low background signal, in the order of ?4.85 μA cm^?2, good electrochemical stability for more than 2 h of continuous functioning and high reproducibility of the signal over the pH 1 to 10 range, are reported, making the hybrid device suitable for several practical uses. The results fully validate the mixed organic/inorganic approach for photoelectrochemical applications, and pave the way for its further exploitation in fields like waste water treatment, environmental monitoring, and water splitting.