Molecular dynamics study of anisotropic shock responses in oriented α-quartz single crystal

Journal of Materials Science - This paper presents an investigation aimed at understanding the shock wave propagation response of oriented α-quartz single crystals by using molecular dynamics...     

Influence of thermal runaway in styrene–acrylonitrile bulk copolymerization revealed by computational fluid dynamics modeling

The computational fluid dynamics (CFD) and kinetic-based moment methods coupled approach is adopted to simulate the bulk copolymerization of styrene–acrylonitrile (SAN) in a stirred tank reactor. Numerical simulations are carried out to investigate the impacts of impeller speed, monomer ratio, initiator ratio, and initial reaction temperature on the copolymerization process and product properties. Particularly, the Chaos theory is selected as a criterion for evaluating the occurrence of the thermal runaway. The Flory's and Stockmayer's distributions are employed to calculate chain length distribution and copolymer composition distribution of copolymer. The simulation results highlight that the appearance of thermal runaway can be postponed by properly increasing the rotation speed, decreasing the initiator loadings, initial acrylonitrile contents and initial reactor temperature. Furthermore, significant differences exist in the product properties that predicted by the ideal and non-ideal models, which demonstrates that the temperature heterogeneity plays a crucial role in SAN copolymerization. This study could offer references for the safe operation and design of polymerization processes.     

N-乙氧基羰基-N,N',N'-三甲基胍高效液相色谱分析方法研究

N-乙氧基羰基-N,N',N'-三甲基胍(简称:三甲基胍)是合成高选择性森林除草剂环嗪酮的主要中间体,国内未见高效液相色谱检测方法的报道,我们采用反相高效液相色谱法对三甲基胍进行了定量分析研究,流动相为:V(水)︰V(乙腈)=90︰10,使用ODSC18为填料的不锈钢柱及具可变波长的紫外检测器.本方法的变异系数为0.19％,标准偏差为0.15,平均回收率为99.56％,经优化后的检测方法简捷、准确,能满足工业化产品定量检测需要.     

Effect of annealing atmosphere on the structure and dielectric properties of unfilled tungsten bronze ceramics Ba4PrFe0.5Nb9.5O30

Unfilled tungsten bronze ceramics with the nominal formula Ba₄PrFe_0.5Nb_9.5O₃₀ were synthesized via the standard solid-state sintering route, and the effects of oxygen vacancies on the dielectric and electrical properties were investigated in addition to the structure. Room-temperature X-ray diffraction showed that the N₂-annealed sample had the largest cell volume. Low-temperature spectrum showed that N₂ annealing rendered the dielectric constant and dielectric loss more frequency dispersive, whereas O₂ annealing inhibited the frequency dispersion. The dc conductivity of all the samples originated from the electrons produced in the second ionization of oxygen vacancies and was most likely controlled by a mixed conduction mechanism of the electron and oxygen-vacancy ions. The N₂-annealed sample has the highest dc conductivity owing to its high concentration of oxygen vacancies. The broadening of the Raman lines and the decrease of Raman intensity for the N₂-annealed sample originated from a significant structural disorder. X-ray photoelectron spectra demonstrated that the increased oxygen vacancies caused by the change of valences of Fe and Pr ions contributed to the structural disorder.     

Coherent energy projection of modulated signals from a sparse array

In this article, coherent energy projection is generalized to modulated signals, enabling the precise delivery of energy to a specific target area. The system and mathematical model are established to characterize the far‐field energy interference from a randomized sparse transmitting array. By using the method of transmitting delay pre‐compensation and spatial coherent combination, the coherent energy of the modulated signals increases significantly after demodulation at the receiving end. The coherent energy scape is presented to describe the spatial distribution of projected energy in the target area, rather than the commonly used performance metric of front‐end energy analysis. Then the simulations set out to examine the spatial grating lobes and potential for expanding the focal spot using multi‐foci accumulation. We also employ the particle swarm optimization to find the optimum distribution of foci to match the focal spot with the desired target area and energy level. Analysis and numerical results are provided to demonstrate the correctness of the theoretical results and effectiveness of the proposed coherent energy projection method.     

乌鲁木齐机场多普勒天气雷达故障统计分析

文章针对乌鲁木齐机场多普勒天气雷达(以下简称ADWR)2009~2019年发生的故障次数、故障分布以及备件更换情况,逐年统计故障率,深入分析了ADWR系统性能,总结出运行维护中的经验,就如何更好地提高雷达业务运行指标提出建议,以提高ADWR雷达的维护、维修能力,建立有针对性的备件管理,为科学的业务运行管理提供依据。     

起重机自重应力对安全评估中应力测试实验结果的影响

应力测试是起重机安全评估中必须进行的一项检测。目前在安全评估工作中常采用应变电测法来采集起重机工作过程中的应力时程数据,由于该方法只能采集到结构由于载荷变化产生的应力,而无法采集到结构因自重产生的应力,导致应力测试无法获取结构的完整应力。利用起重机金属结构自重应力在总应力中占有的权重,分析其对应力测试实验结果的影响大小,试验结果表明在危险截面自重应力大小占总应力大小可达60%,此时不考虑自重应力进行结构安全性的判定是不全面的。可考虑利用仿真技术获取自重应力[1,2],从而使得安全评估应力测试实验结论更加准确。     

Preparation and properties of Eu and Dy co-doped strontium aluminate long afterglow nanomaterials

The long afterglow nanomaterials of strontium aluminate co-doped by Eu and Dy have been synthesized by co-precipitation combined hydrothermal method. The effects of hydrothermal time, calcination time, pH value, the amount of aluminum nitrate, activator, co-activator and flux H₃BO₃ on the fluorescence properties of the product were investigated by means of single factor optimization experiment. Then the orthogonal experiment was employed to obtain the optimal synthesis conditions that are as follows: n_Dy/n_Eu = 2.5, t_c = 2.5?h, n_Eu/n_Sr = 0.02, t_h = 8?h. Subsequently, the optimal synthesis conditions were verified by three repeated experiments, and the obtained products were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and fluorescence spectrometer. The results showed that the synthesized target products all were the mixed crystal phase of SrAl₂O₄ and Sr₄Al_l4O₂₅. The particles presented regular spherical-like with size ~ 100?nm. The dopants Eu and Dy were confirmed existed in the SrAl₂O₄ powders. The fluorescence and afterglow data of the target products were better than that in the orthogonal experiment scheme. The primary emission spectra band was in the range of 400–600?nm with characteristic peak located at ~ 460?nm corresponding to the transitions of Eu²⁺ ions from 4f⁶5d→4f⁷, and the blue light can be observed by naked eyes. The similar fast-decaying and slow-decaying processes were displayed in all the afterglow curves, and the initial afterglow brightness of the target product is apparently higher than that of products synthesized by the orthogonal experiment. The synthesized target products, which show excellent long afterglow performance, present a great application prospects in the aspects of ceramics, plastics, arts and crafts, ink and coating.     

天津市近代机场的规划和建设研究

分析近代天津历次近代城市规划中机场布局思想的演进历程，采用比较研究方法剖析天津近代各类机场设计方案的异同及其各自特征，并总结了天津近代机场场面规制及其跑道形制在不同时期的演进规律，还从规划编制体例角度论证了天津近代机场规划及其实例应用。     

Anderson Acceleration for Nonconvex ADMM Based on Douglas-Rachford Splitting

The alternating direction multiplier method (ADMM) is widely used in computer graphics for solving optimization problems that can be nonsmooth and nonconvex. It converges quickly to an approximate solution, but can take a long time to converge to a solution of high-accuracy. Previously, Anderson acceleration has been applied to ADMM, by treating it as a fixed-point iteration for the concatenation of the dual variables and a subset of the primal variables. In this paper, we note that the equivalence between ADMM and Douglas-Rachford splitting reveals that ADMM is in fact a fixed-point iteration in a lower-dimensional space. By applying Anderson acceleration to such lower-dimensional fixed-point iteration, we obtain a more effective approach for accelerating ADMM. We analyze the convergence of the proposed acceleration method on nonconvex problems, and verify its effectiveness on a variety of computer graphics including geometry processing and physical simulation.