Influence of Different Additives on the Interaction of Quinolone Antibiotic Drug with Surfactant: Conductivity and Cloud Point Measurement Study

Conductometric and cloud point (CP) measurement studies have been performed to investigate the interaction of tetradecyltrimethylammonium bromide (TTAB) and Triton® X-100 (TX-100) with ciprofloxacin hydrochloride (CFH) in different solvents over the temperature range of 295.15–315.15 K. CFH is used for the treatment of various bacterial infections. The observed critical micelle concentration (CMC) values of TTAB were found to be reduced in the presence of electrolytes (Na₂SO₄/Na₃PO₄), and this reduction proceeds with the elevation of salt concentration. The order of the CMC of TTAB follows the trend: > >. The observed CMC values of TTAB were found to increase with increasing temperature and decrease with increasing concentration of CFH in aqueous medium. The values of Gibbs free energy of micellization () for the TTAB/TTAB + CFH mixture were found to be negative, implying spontaneous micellization. The estimated CP of TX-100 decreases with increasing concentration of TX-100 in aqueous medium. The CP values first decrease with increasing concentration of CFH and then increase at higher concentration of CFH almost in all cases investigated. The values of free energy of clouding were found to be positive in all cases studied implying that phase separation of TX-100 was nonspontaneous. The other thermodynamic parameters associated with the micellization of TTAB and the phase separation of TX-100 were estimated and explained.     

Cell-free Stem Cell-Derived Extract Formulation for Regenerative Medicine Applications

Stem cells for regenerative medicine purposes offer therapeutic benefits, but disadvantages are still ill defined. The benefit of stem cells may be attributed to their secretion of growth factors (GFs), cytokines (CKs), and extracellular vesicles (EVs), including exosomes. We present a novel cell-free stem cell-derived extract (CCM), formulated from human progenitor endothelial stem cells (hPESCs), characterized for biologically active factors using ELISA, nanoparticle tracking analysis and single particle interferometric reflectance imaging sensing. The effect on fibroblast proliferation and ability to induce stem cell migration was analyzed using Alamar Blue proliferation and Transwell migration assays, respectively. GFs including IGFBP 1, 2, 3, and 6, insulin, growth hormone, PDGF-AA, TGF-α, TGF-β1, VEGF, and the anti-inflammatory cytokine, IL-1RA were detected. Membrane enclosed particles within exosome size range and expressing exosome tetraspanins CD81 and CD9 were identified. CCM significantly increased cell proliferation and induced stem cell migration. Analysis of CCM revealed presence of GFs, CKs, and EVs, including exosomes. The presence of multiple factors including exosomes within one formulation, the ability to promote cell proliferation and induce stem cell migration may reduce inflammation and pain, and augment tissue repair.     

Radial Sub-band Allocation with Downlink Interference Mitigation in Macro–Femto Environment

Wireless Personal Communications - Femtocell deployment is an important strategy when it comes to improvement of QoS metrics in areas of poor cell coverage like indoors in an LTE environment. This,...     

Analysis of heat transfer through a high strength concrete with circular pipe in a safety vessel of reactor vault

Reactor Vault (RV) is an important structure that supports the main vessel and safety vessel of a reactor. It is a heavy cylindrical structure built around the safety vessel. The RV is divided into an inner and outer wall. The inner wall is of 600?mm thickness and is made of borated concrete, while the outer wall is made up of structural concrete. The outer wall is the main load-bearing member, whereas the inner wall supports only the safety vessel. To prepare a cylindrical model of RV using high strength concrete with special additive and to perform heat transfer analysis on the block to study the effect of air cavities present in the RV model on contact conductance, thermal conductivity and its heat transfer characteristics are studied experimentally.     

Effect of diethyl ether blended with neem oil methyl esters in CI engine

Vegetable oils are now considered to be a potential alternative that can be used in place of partial or total substitution of diesel fuels. In this study, we used diethyl ether as an oxygenated additive to investigate the possible use of higher percentages of biodiesel in an unmodified diesel engine. Neem oil was selected for biodiesel production. The tests were performed at a steady-state condition in a single-cylinder constant speed DI diesel engine. The combustion process involved in diesel engine would be improved and the particulate matter would be reduced if these biodiesels are blended. An experimental investigation is carried out to establish the emission characteristics of a direct injection diesel engine using diethyl ether as additive in Neat Neem oil Biodiesel. Emissions of hydro carbon oxides of nitrogen and carbon monoxide significantly reduced by adding diethyl ether into neem oil biodiesel at 10% and 20% on volume basis.     

Performance evaluation of CBN,coated carbide,cryogenically treated uncoated/coated carbide inserts in finish-turning of hardened steel

In the present work, the performance of cubic boron nitride (CBN) inserts was compared with coated carbide and cryogenically treated coated/uncoated carbide inserts in terms of flank wear, surface roughness, white layer formation, and microhardness variation under dry cutting conditions for finish turning of hardened AISI H11 steel (48–49 HRC). The flank wear of CBN tools was observed to be lower than that of other inserts, but the accumulated machining time for all the four edges of carbide inserts were nearer to or better than the PCBN inserts. Results showed that tool life of carbide inserts decreased at higher cutting speeds. The surface roughness achieved under all cutting conditions for coated-carbide-treated/untreated inserts was comparable with that achieved with CBN inserts and was below 1.6 μm. The white layer formation and microhardness variation is less while turning with cryogenically treated carbide inserts than the CBN and untreated carbide. At low to medium cutting speed and feed, the performance of carbide inserts was comparable with CBN both in terms of tool life and surface integrity.     

Sizing Cracks in Power Plant Components Using Array Based Ultrasonic Techniques

New techniques developed using the array transducer, to image and size the bottom-surface and near-through-wall crack-like defects in thick carbon steel components are discussed. Three studies are reported here including (a) Optimal beam steering angle for focused and unfocused inspection using phased array method for bottom-surface crack sizing. (b) A front wall correction algorithm for sizing of near-through-wall crack-like defects. (c) A small aperture technique for sizing of near-through-wall crack-like defects. A Finite Difference Time Domain (FDTD) based simulation was used to study and verify the experimental observations. The application of time domain scheme relative arrival time technique (RATT), to measure the size of the near-through wall crack-like defects for the leak before break (LBB) criterion, was also investigated and found to be insufficient. A conventional SAFT algorithm was used for improving the sizing using the small aperture technique.     

Performance analysis of a solar photovoltaic operated domestic refrigerator

This paper describes the fabrication, experimentation and simulation stages of converting a 165 l domestic electric refrigerator to a solar powered one. A conventional domestic refrigerator was chosen for this purpose and was redesigned by adding battery bank, inverter and transformer, and powered by solar photovoltaic (SPV) panels. Various performance tests were carried out to study the performance of the system. The coefficient of performance (COP) was observed to decrease with time from morning to afternoon and a maximum COP of 2.102 was observed at 7 AM. Simulations regarding economic feasibility of the system for the climatic conditions of Jaipur city (India) were also carried out using RETScreen 4. It was observed that the system can only be economically viable with carbon trading option taken into account, and an initial subsidy or a reduction in the component costs – mainly SPV panels and battery bank.