Inhalation risk of indoor aerosol spray products commercially available in Bangladesh

Today, urbanised people spend most of their time in indoor environments, and the risk of exposure to toxic materials in an indoor environment is of great concern. This paper considers sources for the inhalation risk of aerosol sprays by measuring the particle size distributions of some of the most popular products that are commercially available in Bangladesh, and examines the degree of toxicity and the health risk via the respirability of the products. Results show that thoracic and respirable fractions of the suspended particulate matter are present in the tested samples and hence the spray products may pose a significant health risk.     

Influence of Different Additives on the Interaction of Quinolone Antibiotic Drug with Surfactant: Conductivity and Cloud Point Measurement Study

Conductometric and cloud point (CP) measurement studies have been performed to investigate the interaction of tetradecyltrimethylammonium bromide (TTAB) and Triton® X-100 (TX-100) with ciprofloxacin hydrochloride (CFH) in different solvents over the temperature range of 295.15–315.15 K. CFH is used for the treatment of various bacterial infections. The observed critical micelle concentration (CMC) values of TTAB were found to be reduced in the presence of electrolytes (Na₂SO₄/Na₃PO₄), and this reduction proceeds with the elevation of salt concentration. The order of the CMC of TTAB follows the trend: > >. The observed CMC values of TTAB were found to increase with increasing temperature and decrease with increasing concentration of CFH in aqueous medium. The values of Gibbs free energy of micellization () for the TTAB/TTAB + CFH mixture were found to be negative, implying spontaneous micellization. The estimated CP of TX-100 decreases with increasing concentration of TX-100 in aqueous medium. The CP values first decrease with increasing concentration of CFH and then increase at higher concentration of CFH almost in all cases investigated. The values of free energy of clouding were found to be positive in all cases studied implying that phase separation of TX-100 was nonspontaneous. The other thermodynamic parameters associated with the micellization of TTAB and the phase separation of TX-100 were estimated and explained.     

Unmanned Aerial Vehicle-Aided 5G NR for Enhanced Network in Urban Scenarios

International Journal of Wireless Information Networks - Recently, Unmanned Aerial Vehicles (UAVs) are being utilized to ensure a better solution to a dependable and cost-effective wireless...     

Energy‐efficient design of greenhouse for Canadian Prairies using a heating simulation model

Greenhouses in northern climates require a large amount of supplemental heating for growing crops in winter seasons, so energy‐efficient design of greenhouses based on local climate is important to minimize the heating demand. In this study, greenhouse design parameters including shape, orientation, the angle of the roof, and width of the span have been studied for the conceptual design of conventional greenhouses for Canadian Prairies using a heating simulation model. Five different shapes of greenhouses including even‐span, uneven‐span, modified arch, vinery, and quonset shape have been selected for the study. The simulation results proved that the uneven‐span gable roof shape receives the highest solar radiation, whereas the quonset shape receives the lowest solar radiation. However, the quonset shape greenhouse requires about 7.6% less annual heating as compared to the gable roof greenhouse, but the quonset would not be adopted as multispan greenhouses. Therefore, the gable roof greenhouse is considered as energy efficient for the multispan gutter connected greenhouses whereas quonset shape as a free‐standing single‐span greenhouses. In high northern latitudes, the greenhouse with east‐west orientation is more energy efficient from heating and cooling point of view when the length‐width ratio of the greenhouse is more than 1. The heating energy saving potential of the large span width in single‐span greenhouses is relatively higher as compared to the multispan greenhouses.     

An efficient approach for prediction of Warburg-type resistance under working currents

In the present study, an efficient approach for the prediction of Warburg-type element is proposed via the analysis of the anode-supported solid oxide fuel cell (SOFC) performance under various working conditions. The details of the performance, polarization curves, impedance behavior, and species distribution profiles within the electrode are investigated via the combination of equivalent circuit model (ECM) analysis and multiphysics numerical simulations. The multiphysics simulation is developed and calibrated with experimental results of SOFC button cells under various working currents. With the complete datasets generated from the calibrated simulations, the trends of the element parameters involved in equivalent circuit model are analyzed. Generalized empirical functions are proposed as well as the procedures of prediction of performance under different conditions. The verification cases show good agreement between the predicted results from proposed model and the reference results. This proposed approach can be utilized to quickly predict the properties for desired performance in the manufacturing processes, and it also has the potential of reducing the computational cost in the simulation of large SOFCs.     

Investigation of OSN properties of PDMS membrane for the retention of dilute solutes with potential industrial applications

Few commercially available membranes can be used for organic solvent nanofiltration (OSN). Applying OSN in chemical industries is nevertheless of high interest to cut with energy consumption linked to solvent recycling and soluble catalysts recovery. A commercial membrane, PERVAP4060, was used to investigate the retention of dilute solutes in toluene feeds and to mimic metathesis medium. The studied solutes were R-BINAP a neutral polyaromatic molecule used in metathesis chemistry, tetraoctylammonium bromide (ToABr), a charged molecule used as a homogeneous catalyst and n-hexadecane. Retention of polar ToABr (95%) was higher than that of neutral R-BINAP (80%). The transfer mechanism, either pore flow or solution-diffusion, was discussed. All the results obtained suggested that the transport is governed by the solution-diffusion mechanism. The measured retentions could be explained in terms of solubility affinities and diffusion coefficients. The stability and performances of PERVAP4060 were well established, showing the strong potential for industrial applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48359.     

Kinetic analysis of magnesium aluminate spinel formation: Effect of MgO:Al2O3 ratio and titania dopant

The mechanistic pathway of MgO-Al₂O₃ reaction in solid state to form MgAl₂O₄ spinel was investigated to correlate the kinetic parameters with ratio of reactants (MgO:Al₂O₃) and with the presence of a doping agent, TiO₂. The time-temperature-expansion data of oxide compacts was analyzed using several model free analyses and model based (linear and non-linear) kinetic algorithms. These indicated that spinel formation process can be best described by single step with n-dimensional Avrami equation for every MgO:Al₂O₃ ratio, irrespective of titania dopant. The activation energy (E_a) of the process was proportional to % spinel formed in each system and validated with quantitative XRD analysis. The higher value of Avrami coefficient (n) in 90 wt% Al₂O₃ compositions has been explained with geometric considerations of powder packing. Incorporations of 1% TiO₂ in the MgO: Al₂O₃ oxide compact did not markedly affect the reaction model, frequency factor and Activation energy.     

Scalable Structural Modal Identification Using Dynamic Sensor Network Data with STRIDEX

This article uses the formulation of the structural identification using expectation maximization (STRIDE) algorithm for compatibility with the truncated physical model (TPM) to enable scalable, output‐only modal identification using dynamic sensor network (DSN) data. The DSN data class is an adaptable and efficient technique for storing measurements from a very large number of sensing nodes, which is the case in mobile sensor networks and BIGDATA problems. In this article, the STRIDEX output‐only identification algorithm is proposed for the stochastic TPM to estimate structural modal properties (frequencies, damping ratios, and mode shapes) directly from DSN data. The spatial information produced by this novel algorithm, called STRIDEX (“X” for extended), is scalable, as demonstrated in a strategy to construct high‐resolution mode shapes from a single DSN data set using a series of independent identification runs. The ability to extract detailed structural system information from DSN data in a computationally scalable framework is a step toward mobile infrastructure informatics in a large urban setting. The performance of the STRIDEX algorithm is demonstrated, using the simulated response of a 5,000 DOF structure, and experimentally, using measurements from two mobile sensor cars, which scanned about 8,000 points on a beam specimen in the laboratory. In the experimental results, a mobile sensor is shown to provide over 120 times more mode shape points than a fixed sensor.     

Evaluation of a cloud cover based model for estimation of hourly global solar radiation in Western Canada

Cloud cover based solar radiation models are relatively simple and convenient as the models require the input of cloud cover data which are mostly available from the meteorological stations. In this study, the performance of a cloud cover based solar radiation model (Kasten–Czeplak model) with original or locally fitted coefficients was evaluated for estimating the hourly global solar radiation for four different locations in Western Canada. The average value of R², mean bias error, and root mean square error are 0.69, ?61.6, and 157.9?W?m^?2, respectively, for the model with original coefficients, whereas 0.82, 4.4, 107.1?W?m^?2 with locally fitted coefficients. Results show that the Kasten–Czeplak model with locally fitted coefficients satisfactorily estimated the hourly solar radiation of four different locations in Western Canada. Also, the results indicate that the model with original coefficients has very limited accuracy under intermediate cloud cover conditions.