Effect of laser power density on the electrochromic properties of WO3 films obtained by pulsed laser deposition

Pulsed laser deposition (PLD) was used to prepare tungsten trioxide (WO₃) films on ITO substrates with a varying laser power density of 4.0–5.5 W/cm². XPS indicated that when the laser power density decreased, the peak positions of the W 4f and O 1s orbits shifted slightly to low energy due to the difference in oxygen vacancies. As the laser power density decreased, W⁶⁺ gradually replaced the lattice position of O^2?, increasing oxygen vacancies in the lattice. The transmittance modulated values (ΔT) were over 44% at 830 nm, indicating strong absorption by the WO₃ thin films in the near-infrared ray. The switching time of the WO₃ thin films between bleached states and coloured states decreased as the laser power density increased due to the amorphous structure, morphology, and lower oxygen deficiency at a high power density. The high ΔT and very fast switching time of t_b (1.09 s) and t_c (6.01 s) demonstrated the excellent electrochromic (EC) properties of the WO₃ films prepared by PLD.     

"对比实验"应用于二氧化碳的性质研究

为了解决学生在上课时参与度不高,不能清楚理解相关知识的概念,进而被动学习的问题,设计对比实验.利用对比实验,增强视觉刺激,引发学生认知冲突,提高求知欲,使学生在真实的问题情境中拓展思维.以"探究二氧化碳的性质"相关教学为例,设计对比实验,进一步论述对比实验的意义.     

商住综合型小区建设工程项目前期管理研究

从某商住综合型小区项目着手,运用关键路径、甘特图、鱼骨图等方法进行研究,对该项目前期管理决策筹备、施工监管、竣工验收3个阶段的特点和问题进行分析,总结出建设项目的前期管理形成了若干闭环管理系统,通过构成连续、封闭回路的各管理任务,对各项建设内容进行多角度管理.采用制度管理、标准化管理、计划管理、目标与考核管理等措施,制订前期管理的优化方案.对优化后方案的模拟实施进行评估可得出,优化前期管理可缩短项目整体工期.     

基于光刀图像的机器人示教纠偏方法

为了解决机器人辅助在线检测系统示教过程中效率低、人为干预多的问题,针对孔类特征,提出一种通过处理光刀图像获取机器人位姿纠正参数的方法。在该方法中,纠偏过程按照将图像光刀线调整为水平方向、将被测特征调整至图像中央、根据不同特征调整最优扫描方向3个步骤进行。根据光刀图像可以求出测量坐标系与被测特征的位姿关系,并得到该位姿与理想测量位姿的偏差。经过坐标变换即可得到在机器人基坐标系下的调整参数。另外,可利用电脑控制机器人运动,从而实现了纠偏过程的自动化。实验结果表明,该方法可将初始的示教位姿修正为理想位姿,且比传统方式效率更高。     

S120在薄带铸轧主轧机控制系统上的应用

薄带铸轧生产线设备紧凑,生产工艺更加低耗高效,是钢铁工业流行发展的趋势.SINAMICS S120控制系统应用在薄带铸轧主轧机传动系统上,可以根据需求灵活增添功能配置.通过介绍该生产线工艺流程,突出S120传动控制系统的优势.此外,针对S120控制系统设计和应用,尤其是负荷平衡控制、SINAMICS Link通讯、安全转矩关断等特殊应用的实现进行了详细的阐述.     

Constructing magnetically recoverable CdS/CaFe2O4 P–N heterojunctions for enhanced photoelectrochemical properties towards H2 evolution reaction

A novel CdS/CaFe₂O₄ (CS/CFO) heterogeneous p-n junction was created by thermal deposition of CaFe₂O₄ nanoparticles on CdS rods. The CS/CFO hetero-structured photocatalysts exhibited increasingly efficient visible light harvesting compared to the bare CdS. The CS/CFO composites also presented higher photocurrent and slower decay of photoluminescence, suggesting a better separation of the photo-generated electrons and holes. The photocatalytic H₂ evolution quantity on the optimized CS/CFO composite from water in the presence of ethanol was up to 2200 μmol after 3-h visible light illumination, which is more than twice that of the pristine CdS. The chemical interaction between CdS and CaFe₂O₄ was confirmed by the shifts in the XPS peaks, which made it possible for the charge carriers to transfer across the p-n junction interface. This research highlights the importance of forming an interfacial p-n heterojunction between two semiconductors for efficient charge separation and improved photocatalytic performance.     

Effects of (Li0.5Sm0.5)/W co-substitution and sintering temperature on the structure and electrical properties of ultrahigh Curie temperature piezoceramics,Ca0.92(Li0.5Sm0.5)0.08Bi2Nb2-xWxO9

With co-substitution of (Li_0.5Sm_0.5) at A site and W at B site, the electrical properties of modified Ca_0.92(Li_0.5Sm_0.5)_0.08Bi₂Nb_2-xW_xO₉ [(CLS)BN-xW, x = 0, 0.015 and 0.03] piezoceramics with ultrahigh Curie temperature (T_C) of > 930 °C were enhanced dramatically. The increased resistivity induced by the co-substitution ensure them to be polarized under an enough high field. Combined with the increase of spontaneous ferroelectric polarization (P_S), the significant enhancements in the piezoelectric, dielectric and ferroelectric properties can be obtained in the composition x = 0.015. Furthermore, the piezoelectric activity (d₃₃) and bulk resistivity (ρ_b) of (CLS)BN-0.015 W can be further enhanced at an appropriate sintering temperature. This optimum composition sintered at 1170 °C shows ultrahigh T_C of ～948 °C, d₃₃ of ～17.3 pC/N and ρ_b of ～6.9 MΩ cm at 600 °C, which are comparable to those of the reported high-temperature Aurivillius piezoceramics with T_C > 850 °C.     

基于Bert预训练模型的虚假新闻文本检测

虚假新闻剥夺了人们获取真相的权利,也给社会和国家带来了许多危害。文中以虚假新闻文本为例,分析和验证了多种预训练语言模型在虚假新闻文本分类上的分类效果。经实验证明,相较于其他语言模型,Bert预训练语言模型取得了较好的结果,预测准确率为86.97%,召回率为88.12%,F1值为87.54%。