Regularities of Chromium(VI) Ions Sorption by Magnetite (Review)

Protection of Metals and Physical Chemistry of Surfaces - The present review is devoted to the sorption properties of magnetite towards hexavalent chromium ions and the possibility of its use as a...     

Tests of a Two-Stage Core at the KV-1 Test Facility: Physical Aspects and Results

Atomic Energy - The physical aspects and main results of reactor tests of a two-stage core consisting of fresh fuel assemblies and a significant number of fuel assemblies from the previous core,...     

Fabrication of different conductive matrix supported binary metal oxides for supercapacitors applications

Here, we have fabricated the spinel binary-metal oxide (FeCo₂O₄) via a solvent-free and cost-effective approach. The nanocomposites of the as-fabricated binary-metal spinel oxide have been prepared with three different conductive-matrices, namely r-GO, CNTs, and PANI, via ultra-sonication approach. The spinel phase and surface functionalities of the fabricated FeCo₂O₄ sample have been confirmed via XRD and FT-IR analyses, respectively. The morphological-structure and elemental composition of the fabricated samples have been probed via FESEM and EDX results. The role of added conductive-matrices in the improvement of the electrical conductivities of the fabricated nanocomposites has been investigated via I–V experiments. The electrochemical experiments, conducted in half-cell configuration, showed that FeCo₂O₄/PANI nanocomposite exhibited the highest specific capacitance (658.9 Fg^-1) than that of the remaining two nanocomposites. Furthermore, FeCo₂O₄/PANI nanocomposite exhibited excellent cyclic stability as it lost just 8.3% of its initial specific capacitance even after 3000 cyclic tests. The superior capacitive-activity of the FeCo₂O₄/PANI nanocomposite is accredited to its high conductivity, large surface area, and synergy effects between the pseudocapacitance derived from the PANI and FeCo₂O₄ nanostructure. The electrochemical and electrical measurements suggested that FeCo₂O₄/PANI nanostructure is an emerging contender for energy storage applications.     

A novel ceramic matrix composite based on YNbO4–TiO2 for microwave applications

This work presents the dielectric properties of YNbO₄ (YNO)–TiO₂ composites in the microwave range. X-ray diffraction analysis demonstrates that the addition of TiO₂ to YNO results in the formation of a Y(Nb_0.5Ti_0.5)₂O₆ phase. In the microwave range, the values of permittivity and dielectric loss did not present major changes with the increment of TiO₂. Moreover, the addition of TiO₂ results in an improvement in the thermal stability of YNO, with YNO63 demonstrating a resonant frequency of ?8.96 ppm.°C^?1. We utilised numerical simulations to evaluate the behaviour of these materials as dielectric resonator antennae and it is found that they exhibit a reflection coefficient below ?10 dB at the resonant frequency, with a realised gain of 4.94 – 5.76 dBi, a bandwidth of 665–1050 MHz and a radiation efficiency above 84%. Our results indicate that YNO–TiO₂ composites are interesting candidates for microwave operating devices.     

Culm Morphological Traits Contributing to Lodging Resistance in First Generation NERICA Cultivars Under Foliar Application of Orthosilicic Acid Fertilizer

Silicon - Lodging resistance in upland rice requires adequate knowledge of the mechanical basis of culm morphological traits (CMTs) with potential for improved structural integrity under...     

Fuzzy Logic Algorithm of Ecological Forest Zoning in the Vicinity of Chemical Plants Based on a Hierarchical System of Fuzzy Composite Indices

Theoretical Foundations of Chemical Engineering - A hierarchical system of fuzzy composite indices calculated for natural forest levels is put forward. For each of the levels, its own composite...     

Evaluation of the Range of Stable and Efficient Operation of Column Mass Transfer Devices with Jet-Film Contact Devices

Chemical and Petroleum Engineering - A contact device for heat and mass transfer devices with the ability to maintain the uniformity of flow distribution over the cross section of the device is...     

CuxNi1-xO nanostructures and their nanocomposites with reduced graphene oxide: Synthesis,characterization, and photocatalytic applications

NiO nanostructure was synthesized using a simple co-precipitation method and was embedded on reduced graphene oxide surface via ultrasonication. Structural investigations were made through X-ray diffraction (XRD) and functional groups were confirmed by Fourier transform infrared spectroscopy (FTIR). XRD analysis revealed the grain size reduction with doping. Fourier transform infrared spectroscopy confirmed the presence of metal-oxygen bond in pristine and doped NiO nanostructure as well as the presence of carbon containing groups. Scanning electron microscopy (SEM) indicated that the particle size decreased when NiO nanostructure was doped with copper. BET surface area was found to increase almost up to 43 m²/g for Cu doped NiO nanostructure/rGO composite. Current-voltage measurements were performed using two probe method. UV–Visible spectroscopic profiles showed the blue and red shift for Cu doped NiO nanostructure and Cu doped NiO Nanostructure/rGO composite respectively. Rate constant for Cu doped NiO nanostructure/rGO composite found to increase 4.4 times than pristine NiO nanostructure.     

Information Redundancy in Constructing Systems for Audio Signal Examination on Deep Learning Neural Networks

Cybernetics and Systems Analysis - Preliminary signal processing methods used to create new tools to examine materials and digital sound recording means are described. It is shown that using...     

基于改进 abcd 模型的黄河源区径流变化与归因

为改进模型对高寒地区融雪径流模拟不足的缺陷，将融雪模块耦合到传统 abcd 模型。利用 1980—2018 年 逐月实测的径流数据和通过 AnuSpline 方法插值的格网气象要素，驱动改进后的abcd 模型，分析三江源生态保护 措施实施前后（1980—1999 年和 2000—2018 年）黄河源区径流的动态变化，并量化关键气象因素与人类活动对 径流变化的影响程度，即相对贡献。结果表明：耦合融雪模块的 abcd-snow 模型完善了高寒地区水文过程的模拟， 提高对径流的模拟性能，在黄河源区表现出较好的适用性；整个研究时段黄河源区的实测径流呈不显著减少趋势 （?0.80?mm/a，p>0.05），但 2000 年前径流则呈现显著下降趋势（?4.12?mm/a，p<0.05），2000 年后径流则呈显著增加 趋势（3.16?mm/a，p<0.05）；?归因分析表明气候变化是源区径流变化的主导因素。2000 年前，气候变化对径流减少 的相对贡献率为 62.8%，人类活动对径流的贡献为 37.2%；2000 年后，气候变化对径流增加的贡献率达到 120.0?%， 人类活动对径流的贡献为?20.0%。其中：降水的变化是决定径流变化主导因素；其他气候因素的相对贡献较小； 以人类活动为主的生态恢复可显著降低河川径流。本研究有助于理解气候变化和下垫面变化对黄河源区水资源 变化的系统驱动机理，并为流域水资源合理配置提供科学参考依据。