The fuzzy logic-based modeling of a micro-scale sloped solar chimney power plant

Journal of Mechanical Science and Technology - The energy demand of world is increasing worldwide because of increasing population and developing technology. The use of environmentally friendly...     

Electrokinetic and antibacterial properties of needle like‐TiO2/polyrhodanine core/shell hybrid nanostructures

The aim of this study was to fabricate needle like‐TiO₂/polyrhodanine nanostructures by polymerizing rhodanine monomer on the TiO₂ nanoparticles' surfaces and investigate their antibacterial activities. The structural, thermal, morphological, surface and electrical properties of non‐covalently functionalized nanoparticles were characterized by using FTIR, XPS, elemental analysis, TGA, XRD, SEM‐EDX, TEM, contact angle, and conductivity measurements. Characterization results confirmed the formation of needle like‐TiO₂/polyrhodanine (PRh) core/shell hybrid nanostructures. Alterations on the surface and electrokinetic properties of the materials were characterized by zeta (ζ)‐potential measurements with the presence of various salts and surfactants. The ζ‐potential of needle like‐TiO₂ was observed to increase from ?7.6 mV to +28.4 mV after forming a core/shell needle like‐TiO₂/PRh nanocomposite structure and with the presence of cetyltrimethyl ammonium bromide (CTAB) surfactant. Thereby colloidally more stable dispersions were formed. Antibacterial properties of needle like‐TiO₂/PRh were also tested against Staphylococcus aureus, Klebsiella pneumoniae, and Escherichia coli by various methods and they showed good antibacterial activity. The highest killing efficiency was determined for needle like‐TiO₂/PRh against E. coli by colony‐counting method as 0.95. TEM experiments also showed the immobilizations of the nanoparticles on E. coli and revealed the interactions between E. coli and the nanoparticles. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41554.     

A non-contact method for part-based process performance monitoring in end milling operations

Surface response to excitation (SuRE) method was originally developed for structural health monitoring (SHM) applications. SuRE was used to evaluate the performance of completed milling operations. The method generates surface waves on the plate and studies the spectrum changes at selected points to detect defects and change of compressive forces. In this study, the length, depth, and width of a slot were changed step by step. The surface of the aluminum plate was excited in the 20–400 kHz range with a piezoelectric element. A laser scanning vibrometer was used to monitor the vibrations at the predetermined grid points after the dimensions of the slot were changed methodically. The frequency spectrums of measured vibrations were calculated by using the Fast Fourier Transformation (FFT). The sums of the squares of the differences (SSD) of the spectrums were calculated to evaluate the change of the spectrums. The SuRE method was able to determine if the dimensions were changed in each case at all the selected points. The scanning laser vibrometer is not feasible to be used at the shop floor. However, the study demonstrated that a piezoelectric element attached to any of the grid points would be able to evaluate the completed machining process.     

Experimental study of a micro-scale sloped solar chimney power plant

Journal of Mechanical Science and Technology - Solar chimney power plants (SCPP) are structures that have the potential to generate a significant amount of electrical energy without harming the...     

Geochemical characteristics of major and trace elements in Sahinali Coals,Aydin, Turkey

In this study, geochemical behavior of elements is investigated in 25 coal samples collected at 10 locations of ?ahinli coaliferous units at southeast of Ayd?n, Turkey. In all the samples, X-ray powder diffraction and inductively coupled plasma mass spectrometry analyses were performed and element and mineral compositions were determined. Total organic carbon (TOC) values of coals are between 14.6 and 37.7 wt% with average of 28.5 wt%. Samples are composed of quartz, calcite, feldspar, dolomite, mica, gypsum, and salt minerals which are accompanied by illite-, kaolinite-, and smectite-type clay minerals. Comparison of average element contents of world coals and studied samples yields that K > Fe > As > U > Cs > Y > Er > Al > Th > Rb > Yb > W > Tb > Dy > Lu > Ce > Sm > La > Ho > Si > Nd > Gd > Tm > Eu > Nb > Pr > Pb > Sn > Ni > Cu > Ga > Ta > Sb > Zr > Cd > V > Zn > Co > Mo > P > Hf > Ba are found to be enriched, while Mn > Be > Ca > Sr > Bi > Mg are found to be depleted. Statistically elements are correlated with TOC.     

The effect of magnetic field on the impurity binding energy of shallow donor impurities in a Ga1?xInxNyAs1?y/GaAs quantum well

Using a variational approach, we have investigated the effects of the magnetic field, the impurity position, and the nitrogen and indium concentrations on impurity binding energy in a Ga_1−xIn_xN_yAs_1−y/GaAs quantum well. Our calculations have revealed the dependence of impurity binding on the applied magnetic field, the impurity position, and the nitrogen and indium concentrations.