基于误差估值累加开环校正的诱导式欺骗检测方法

诱导式卫星欺骗干扰可诱导航空器逐渐偏离预定航迹，难以被发现，因此及时有效地检测干扰是飞行安全的保障。在现有紧组合导航体制基础上，设计了一种基于误差估值累加开环校正的紧组合导航结构，并证明了其性能与传统闭环校正紧组合导航性能等效。在此结构中，将紧组合导航系统与自适应序贯概率比检测方法结合，提出了一种基于误差估值累加开环校正的诱导式欺骗检测方法，融合紧组合导航信息与其他不受欺骗影响的导航信息，构建欺骗检测统计量进行诱导式欺骗检测。仿真结果表明，开环校正结构可避免随时间累加的惯性导航系统误差所导致的组合导航滤波器发散问题，同时欺骗检测方法可进一步提高算法对“最坏”情形下微小诱导式欺骗的检测效果。     

Outer Membrane Vesicle Production by Helicobacter pylori Represents an Approach for the Delivery of Virulence Factors CagA,VacA and UreA into Human Gastric Adenocarcinoma (AGS) Cells

Helicobacter pylori infection is the etiology of several gastric-related diseases including gastric cancer. Cytotoxin associated gene A (CagA), vacuolating cytotoxin A (VacA) and α-subunit of urease (UreA) are three major virulence factors of H. pylori, and each of them has a distinct entry pathway and pathogenic mechanism during bacterial infection. H. pylori can shed outer membrane vesicles (OMVs). Therefore, it would be interesting to explore the production kinetics of H. pylori OMVs and its connection with the entry of key virulence factors into host cells. Here, we isolated OMVs from H. pylori 26,695 strain and characterized their properties and interaction kinetics with human gastric adenocarcinoma (AGS) cells. We found that the generation of OMVs and the presence of CagA, VacA and UreA in OMVs were a lasting event throughout different phases of bacterial growth. H. pylori OMVs entered AGS cells mainly through macropinocytosis/phagocytosis. Furthermore, CagA, VacA and UreA could enter AGS cells via OMVs and the treatment with H. pylori OMVs would cause cell death. Comparison of H. pylori 26,695 and clinical strains suggested that the production and characteristics of OMVs are not only limited to laboratory strains commonly in use, but a general phenomenon to most H. pylori strains.     

Microstructure and mechanical behavior of laser aided additive manufactured low carbon interstitial Fe49.5Mn30Co10Cr10C0.5 multicomponent alloy

Laser aided additive manufacturing(LAAM)was used to fabricate bulk Fe49.5Mn30Co10Cr10C0.5 interstitial multicomponent alloy using pre-alloyed powder.The room temperature yield strength(σy),ultimate tensile strength(σUTS)and elongation(εUST)were 645 MPa,917 MPa and 27.0％respectively.The as-built sample consisted of equiaxed and dendritic cellular structures formed by elemental segregation.These cellular structures together with oxide particle inclusions were deemed to strengthen the material.The other contributing components include dislocation strengthening,friction stress and grain bound-ary strengthening.The high εUTS was attributed to dislocation motion and activation of both twinning and transformation-induced plasticity(TWIP and TRIP).Tensile tests performed at-40℃and-130℃demonstrated superior tensile strength of 1041 MPa and 1267 MPa respectively.However,almost no twinning was observed in the fractured sample tested at-40℃and-130℃.Instead,higher fraction of strain-induced hexagonal close-packed(HCP)ε phase transformation of 21.2％were observed for fractured sample tested at-40℃,compared with 6.3％in fractured room temperature sample.     

Contributing to sustainability: addressing the core problems

Clean Technologies and Environmental Policy -     

Effect of lognormal particle size distributions on particle spreading in additive manufacturing

Additive manufacturing (AM) has attracted much attention worldwide in various applications due to its convenience and flexibility to rapidly fabricate products, which is a key advantage compared to the traditional subtractive manufacturing. This discrete element method (DEM) study focusses on the impact of particle polydispersity during the particle spreading process on parameters that affect the quality of the final product, like packing and bed surface roughness. The particle systems include four lognormal particle size distribution (PSD) widths, which are benchmarked against the monodisperse system with the same mean particle diameter. The results reveal that: (i) the solid volume fraction of the initial packed particle bed in the delivery chamber increases then plateaus as the PSD width increases; (ii) regardless of PSD width, the solid volume fraction of the particle bed increases with spreading layer height before compression, but decreases with layer height after compression; (iii) the bed surface roughness increases with PSD width or layer height both before and after the compression of the spreading layer; (iv) the extent of increase in solid volume fraction during compression is correlated with the extent of decrease in bed surface roughness; and (v) the broader PSDs exhibit larger fluctuations of solid volume fraction of the particle bed and bed surface roughness due to greater variability in the arrangement of particles of different sizes. The results here have important implications on the design and operation of particle-based AM systems.     

过热与混溶处理对Al-30％Si合金微观组织的影响

对Al-30%Si合金进行过热处理及高低温溶体混溶处理,观察分析其微观组织的变化.结果表明:过热度温度区间为200～500℃时,随着温度的逐渐升高,初晶硅的平均尺寸略有减小,但形态依然为板片状和五瓣星状,而共晶硅的尺寸与形貌基本保持不变;高低温熔体混溶处理对合金组织的改善作用有限,在低温熔体温度为760℃时效果较好,初晶硅平均尺寸略有减小,五瓣星状的初晶硅基本消失,但共晶硅的尺寸与形貌未变.     

Characterization of biogenic hydroxyapatite derived from animal bones for biomedical applications

In this work, the viability of producing biogenic hydroxyapatite from bio-waste animal bones, namely bovine (cow), caprine (goat) and galline (chicken), through a heat treatment process has been investigated. The animal bones were locally sourced, cleaned to remove collagen and subsequently heat treated in air atmosphere at different temperatures ranging from 600?°C to 1000?°C. From the range of sintering temperatures investigated, it was found that hydroxyapatite derived from bovine bone showed good thermal stability while those produced from caprine and galline bones exhibited phase instability with traces of tri-calcium phosphate (TCP) being detected after heat treatment beyond 700?°C. The porous nature of the bone samples can be observed from the microstructures obtained and supported by low relative density. Heating the bovine and caprine bones at selected temperatures yielded porous HA body, having hardness values that are comparable with human cortical bone. However, the sintered galline bone sample showed higher porosity levels and low hardness when compared to the other two bone types.     

An investigation of the drivers,barriers, and incentives for environmental management systems in the Malaysian food and beverage industry

Clean Technologies and Environmental Policy - Food production and consumption is one of the major causes of global environmental degradation. One way to address environmental impacts in the food...     

综机设备集中化管理实践

综机设备是煤矿采掘生产效率的重要支撑，如果没有先进的综机设备，要想提高采掘生产效率是不可能的。从综机设备集中化和综机设备检修的专业化，分别阐述了其发展趋势，简要总结了中煤新集多年的实践经验，并针对目前管理存在的问题提出相应的建议。     

Sustainability of the four generations of biofuels – A review

Biofuel has emerged as an alternative source of energy to reduce the emissions of greenhouse gases in the atmosphere and combat global warming. Biofuels are classified into first, second, third and fourth generations. Each of the biofuel generations aims to meet the global energy demand while minimizing environmental impacts. Sustainability is defined as meeting the needs of the current generations without jeopardizing the needs of future generations. The aim of sustainability is to ensure continuous growth of the economy while protecting the environment and societal needs. Thus, this paper aims to evaluate the sustainability of these four generations of biofuels. The objectives are to compare the production of biofuel, the net greenhouse gases emissions, and energy efficiency. This study is important in providing information for the policymakers and researchers in the decision-making for the future development of green energy. Each of the biofuel generations shows different benefits and drawbacks. From this study, we conclude that the first generation biofuel has the highest biofuel production and energy efficiency, but is less effective in meeting the goal of reducing the greenhouse gases emission. The third generation biofuel shows the lowest net greenhouse gases emissions, allowing the reduction of greenhouse gases in the atmosphere. However, the energy required for the processing of the third generation biofuel is higher and, this makes it less environmentally friendly as fossil fuels are used to generate electricity. The third and fourth generation feedstocks are the potential sustainable source for the future production of biofuel. However, more studies need to be done to find an alternative low cost for biofuel production while increasing energy efficiency.