The Versatile Manipulations of Self-Assembled Proteins in Vaccine Design

Protein assemblies provide unique structural features which make them useful as carrier molecules in biomedical and chemical science. Protein assemblies can accommodate a variety of organic, inorganic and biological molecules such as small proteins and peptides and have been used in development of subunit vaccines via display parts of viral pathogens or antigens. Such subunit vaccines are much safer than traditional vaccines based on inactivated pathogens which are more likely to produce side-effects. Therefore, to tackle a pandemic and rapidly produce safer and more effective subunit vaccines based on protein assemblies, it is necessary to understand the basic structural features which drive protein self-assembly and functionalization of portions of pathogens. This review highlights recent developments and future perspectives in production of non-viral protein assemblies with essential structural features of subunit vaccines.     

Size-dependent separation of graphene oxide by deformation of packed-gel in a chromatographic column

ABSTRACT

A deformable gel-packed chromatographic column was used to separate as-synthesized graphite oxide with different sizes. The synthesized gel (56 µm) was deformed by pressure of the fluid flow and the gaps in the gels showed a range of sizes. A suspension of graphene oxide (0.1 g/L, 10 mL) was injected, and graphene oxide in the elution had a size at 0.56 μm and 0.14 μm, whereas in half upper and bottom domain of the gel layer graphene oxide had a size at 33 µm and 2.9 µm, respectively, demonstrating that graphene oxide suspension was separated by size through gel layer.     

Polarity Effect and Electromagnetic Radiation of Partial Discharge Accompanying Growth of Electrical Tree

We have investigated the characteristics of radiated electromagnetic (EM) waves from positive and negative partial discharges (PD) in epoxy resin and cross‐linked polyethylene. We found that there is a correlation among the EM level from PD, the positive PD current, and electrical trees. Therefore, the growth of an electrical tree produces a lot of positive PD. We have also investigated the characteristics of the frequency region of EM waves from PD in air, insulating oil, and liquid epoxy in addition to the above insulators. EM waves were detected in the frequency region of 40 MHz to 300 MHz from positive and negative PD in epoxy resin and cross‐linked polyethylene. EM waves were also detected in the frequency region of 40 MHz to 150 MHz from positive and negative PD in air. In the case of insulating oil and liquid epoxy, EM waves were detected in the frequency regions of 40 MHz to 150 MHz from positive PD, and 40 MHz to 250 MHz from negative PD. The frequency region differed depending on the material and the discharge polarity. Our investigation indicates that the cause is differences in electric field strength at the time of PD occurrence.     

Fabrication and piezoelectric properties of BaTiO3/BaTiO3-Bi(Mg1/2Ti1/2)O3-BiFeO3 composites

We fabricated xBaTiO₃ (BT)/(1-x)[BaTiO₃-Bi(Mg_1/2Ti_1/2)O₃-BiFeO₃] (BT-BMT-BF)?+?0.1?wt%MnCO₃ composites by spark plasma sintering and investigated the effect of BT content x, BT powder size, and BT-BMT-BF composition on piezoelectric properties. For xBT/(1-x)(0.3BT-0.1BMT-0.6BF) +?0.1?wt%MnCO₃ (x?=?0–0.75) composites with a 0.5-µm BT powder, the dielectric constant was increased with x, and the relative density was decreased at x?=?0.67 and 0.75, creating optimum BT content of x?=?0.50 with a piezoelectric constant d₃₃ of 107?pC/N. When a larger 1.5-µm BT powder was utilized for the composite with x?=?0.50, the d₃₃ value increased to 150?pC/N due to the grain size effect of the BT grains. To compensate for a compositional change from the optimum 0.3BT-0.1BMT-0.6BF due to partial diffusion between the BT and 0.3BT-0.1BMT-0.6BF grains, a 0.5BT/0.5(0.275BT-0.1BMT-0.625BF)?+?0.1?wt%MnCO₃ composite with the 1.5-µm BT powder was fabricated. We obtained an increased d₃₃ value of 166?pC/N. These results provided a useful composite design to enhance the piezoelectric properties.     

Characteristics of humic substances in the Kuji River waters as determined by high-performance size exclusion chromatography with fluorescence detection

Direct measurement by high-performance size exclusion chromatography with fluorescence detection was applied to the characterization of humic substances in river waters from the Kuji River system, which runs through forest hills and an agricultural plain in Japan. The monitoring wavelength of excitation 320 nm and emission 430 nm corresponds to the fluorescence maxima for aquatic fulvic acid. Chromatograms of the river waters showed four peaks; each peak position was in good agreement among these samples. Peak height ratios for the samples from the upstream Kuji River and its tributaries were different from those of the midstream and downstream sections of the Kuji River, which may reflect differences in the characteristics of humic substances and other organic materials supplied from soil to river.     

基于图像相关分析的砂土模型试验变形场量测

高分辨率数码相机的出现为砂土模型试验变形场非接触量测法的研究开发提供了一条简便经济而且实用的途径,在模型试验观测面上,不再需要布置嵌入式量测标志点或描画网格,直接用数码相机在试验各阶段拍摄照片,然后对照片序列进行图像相关分析,即可得出模型试验的变形场分布。利用图像匹配技术追踪模型上点的位移,借用FEM常用的等参单元的概念进行图像校准和应变计算,采用双线性插值技术可以实现微小变形量测,并提出同时用平移和旋转搜索方法,以适应砂土模型的变形特点。精度检验试验结果表明,一个像素以下的平移量测标准方差达到0.19个像素,数值试验表明,15°旋转刚体变形量测,非旋转搜索和旋转搜索的标准方差分别为0.49和0.08个像素。最后给出一个在砂土地基承载力离心机模型试验中的应用实例,分析结果包含砂土模型位移场、最大剪应变场和体积应变场的分布图。结果表明这一方法使得砂土模型局部化变形、剪切带和渐进破坏过程的量化分析成为可能。     

Stone-Wales Rearrangement Pathways from the Hinge-Opened [2+2] C60 Dimer to Ipr C120 Fullerenes. Vibrational Analysis of Intermediates

Abstract

Possibility of the previously proposed hinge-opened product 2 of [2+2] C₆₀, dimer 1 transforming itself into IPR C₁₂₀ fullerenes by a series of generalized Stone-Wales (GSW) rearrangements has been tested by seeking all topologically acceptable pathways with the help of a graphical search program. the first IPR isomer 4 appeared after 20 GSW steps from the wide-bridged dumb-bell shaped precursor 3. More than 1,000 C₁₂₀ fullerene structures were generated during subsequent ten GSW steps, but the outstanding T _d C₁₂₀ global minimum 5 was not reached. Semiempirical vibrational calculations predict characteristic transition in the vibrational spectra in the course of rearrangement pathway.     

A Water‐Soluble Mechanochromic Luminescent Pyrene Derivative Exhibiting Recovery of the Initial Photoluminescence Color in a High‐Humidity Environment

Switching of the luminescence properties of molecular materials in response to mechanical stimulation is of fundamental interest and also has a range of potential applications. Herein, a water‐soluble mechanochromic luminescent pyrene derivative having two hydrophilic dendrons is reported. This pyrene derivative is the first example of a mechanochromic luminescent organic compound that responds to relative humidity. Mechanical stimulation (grinding) of this pyrene derivative in the solid state results in a change of the photoluminescence from yellow to green. Subsequent exposure to water vapor induces recovery of the initial yellow photoluminescence. The color change is reversible through at least ten cycles. It is also demonstrated that this compound can be applied as a mechano‐sensing material in frictional wear testing for grease, owing to its immiscibility in non‐polar solvents and its non‐crystalline behavior. Transmission electron microscope and atomic force microscope observations of samples prepared from dilute aqueous solutions of the pyrene derivative on suitable substrates, together with dynamic light scattering measurements for the compound in aqueous solution, indicate that this amphiphilic dumbbell‐shaped molecule forms micelles in water.