Wavelength Tailorability of Broadband Near‐Infrared Luminescence in Cr4+‐Activated Transparent Glass‐Ceramics

Four Cr⁴⁺‐activated transparent glass‐ceramics containing different species of silicate nano‐crystals (Zn₂SiO₄, Mg₂SiO₄, Li₂ZnSiO₄, and Li₂MgSiO₄) were successfully prepared. Absorption spectra, photoluminescence spectra, lifetime decay curves, and quantum yield of these transparent glass‐ceramics were measured. According to the crystal field strength of Cr⁴⁺‐incorporated tetrahedral sites, the broadband near‐infrared (NIR) luminescence of Cr⁴⁺ can be tailored from 1130 to 1350 nm and the lifetime of Cr⁴⁺ luminescence can be prolonged from 6 to 100 μs. Quantum yield in the transparent glass‐ceramics containing Li₂ZnSiO₄ nano‐crystals reached at 17%, which is the highest value of NIR luminescence in transition‐metal‐activated glass materials.     

Effect of humidity on human comfort and productivity after step changes from warm and humid environment

Subjective experiments were conducted to evaluate the effects of humidity on human comfort and productivity under transient conditions from hot and humid environment to thermally neutral condition. Two climate chambers, “Chamber 1” and “Chamber 2”, adjoined each other were used for this study. Subjects were exposed to 30 °C/70%RH air in Chamber 1 for 15 min with 2.0 met of metabolic rate. Then they moved into Chamber 2, where 4 humidity conditions, 30, 40, 50 and 70%RH were examined. Air temperature was adjusted to keep SET* constant at 25.2 °C for all conditions. Subjects were exposed in Chamber 2 for 180 min performing 2 kinds of simulated office work.

Positive effects of low humidity on subjective pleasantness were found under transient condition at low humidity due to more evaporation from human body, while no significant difference in thermal sensation and humidity sensation among 4 relative humidity levels was obtained. Subjective performance was found to be at the same level under all conditions. However, subjects reported to be more tired at 70%RH after humidity step change.     

Enhanced Light Storage of SrAl2O4 Glass‐Ceramics Controlled by Selective Europium Reduction

A luminescent Eu, Dy: SrAl₂O₄ glass‐ceramics with high transparency in the visible region was successfully synthesized using the frozen sorbet technique with the control of O₂ partial pressure () for the oxidation of Eu²⁺ ions. The glass‐ceramics include Eu²⁺, Eu³⁺, and Dy³⁺ ions, and thus exhibits three characteristic types of emission bands, 4f–5d at around 520 nm (Eu²⁺ ions), 4f–4f at 610 nm (Eu³⁺ ions), and 480 nm (Dy³⁺ ions). The Eu, Dy: SrAl₂O₄ glass‐ceramics provide remarkable long‐persistent luminescence under dark condition. The glass‐ceramics also exhibits color‐changing luminescence in the visible region based on their remarkable light storage properties. The luminescent Eu, Dy: SrAl₂O₄ glass‐ceramics using the frozen sorbet technique with control of are promising materials for application in novel photonic and light storage materials.     

Non-contact measurements of water jet spreading width with a laser instrument

Jet spreading width is one of the important characteristics of water jets discharging into the air. Many researchers have dealt with measuring this width, and contact measuring methods on the water jet surface were employed in a lot of the cases. In order to avoid undesirable effects caused by the contact on the jet surface, we introduce non-contact measuring methods with a laser instrument to the measurements of jet spreading width. In measurements, a transmitter emits sheet-like laser beam to a receiver. The water jet between the transmitter and the receiver interrupts the laser beam and makes a shadow. The minimum and maximum values of the shadow width are measured. In addition, pictures of the water jet are taken with a scale, and the shadow width is measured from the pictures. The experiments on various needle strokes were performed. Three kinds of width consistent with the jet structure were obtained. In the results, it can be concluded that our non-contact measuring methods are feasible. The data of jet spreading widths and jet taper were obtained and are useful for future applications.     

950 keV, 3.95 MeV and 6 MeV X-band linacs for nondestructive evaluation and medicine

We are developing compact X-band linac X-ray sources for nondestructive evaluation and medicine. First, we develop a portable X-ray system by a 950 keV 9.4 GHz X-band linac to realize on-site inspection. We use a low power (250 kW) magnetron as an RF source for compactness of the whole system. Since the RF power source is quite small and the stored energy in the structure is also small, we faced the problem of beam loading and current/RF-power oscillation. We are analyzing the problem by the circuit model. We plan to use this system for erosion inspection of metal pipes of petrochemical complex. By adopting a side-coupling cavity design to avoid the oscillation, we have developed 6 MeV X-band (9.3 GHz) linac for pinpoint dynamic tracking cancer therapy. Furthermore, we are manufacturing 3.95 MeV X-band (9.3 GHz) linac X-ray source with flexible waveguides for on-site bridge inspection. Updated results and situations are presented.     

Glass and Rare-Earth Elements: A Personal Perspective

Light-based technologies are strongly supported by various glass materials in general. This article focuses on glasses containing rare-earth elements, doped fibers, as well as their photonic functions such as optical amplifications in fiber telecommunication. Scientific progress and applications of rare-earth spectroscopy and technologies of doped glasses and fibers in recent 60 years have been more than dramatic. Development of various laser diodes has been strongly linked with realization of novel devices of rare-earth-doped glasses. In addition to many milestones listed in the resolution of International Year of Light, we should notice that 2015 is also the 50th anniversary of the erbium-doped glass laser, which is later transformed into the optical fiber amplifier, the enabler of today's information society.     

Glass-Ceramics and Solid-State Lighting

Yttrium aluminum garnet (YAG) doped with Ce³⁺ ion is known as an excellent phosphor for light-emitting diode (LED), usually used as a powder form dispersed in organic resins. We have developed translucent glass-ceramics (GC) of YAG: Ce³⁺ microcrystals in 2004. The GC sheet with half millimeter thick can work efficiently to make identical emission spectra with conventional white LED when combined with a blue LED. This report reviews the development history of the GC materials and impact for all inorganic solution for solid-state lighting.