Synthesis,structure, CO oxidation,and H2 production activities of CaCu3−xMnxTi4−xMnxO12 (x = 0, 0.5, and 1.0)

Synthesis of nanocrystalline pristine and Mn-doped calcium copper titanate quadruple perovskites, CaCu_3?xMn_xTi_4?xMn_xO₁₂ (x = 0, 0.5, and 1.0) by modified citrate solution combustion method has been reported. Powder X-ray diffraction patterns attest the phase purity of the perovskite materials. Average particle sizes of all the materials obtained from the Scherrer's formula are in the range of 55–70 nm. The specific surface areas for all the perovskites obtained from BET isotherms are found to be low as expected for the condensed oxide systems and fall in the range of 13–17 m² g^?1. Transmission electron microscopy studies show a reduction in particle size of CaCu₃Ti₄O₁₂ with increase in Mn doping. Ca and Ti are present in +2 and +4 oxidation states in all the materials as demonstrated by X-ray photoelectron spectroscopy analyses. Cu²⁺ gets reduced in CaCu₃Ti₄O₁₂ with higher Mn content. Mn is observed to be present only in +3 oxidation state. All the materials have been examined to be active in CO oxidation as well as H₂ production from methanol steam reforming. CaCu₃Ti₄O₁₂ with ~14 at.% Mn is found to show best catalytic activities among these materials. A comprehensive analysis of the catalytic activities of these perovskites toward CO oxidation and H₂ production from MSR reveal the cooperative activity of copper-manganese in the doped perovskites and it is more effective at lower manganese content.     

A triptycene derived hypercrosslinked polymer for gas capture and separation applications

This work describes facile synthesis of a porous polymeric material ( T-HCP ) using readily available reagents. Specifically, T-HCP is a thermally stable and hypercrosslinked polymer (HCP) that is essentially microporous with a high BET specific surface area (940 m² g^?1). Triptycene based polymers are known to feature internal free volume. Thus, the incorporation of triptycene units and extensive crosslinking by an external cross-linker in T-HCP makes it a promising adsorbent for small gas capture applications. Experimental results show that T-HCP demonstrated good CO₂ capture capacity of 132 mg g^?1 (273 K, 1 bar). Molecular hydrogen storage capacity of T-HCP is estimated to be 17.7 mg g^?1 (77 K, 1 bar). T-HCP revealed high CO₂/N₂ selectivity (up to 63) as well as promising CO₂/CH₄ (up to 9.1) selectivity suggesting its potential applicability for CO₂ separation from flue and natural gases.     

Reversible,repeatable and low phase transition behaviour of spin coated nanostructured vanadium oxide thin films with superior mechanical properties

Smooth, uniform and crystalline vanadium oxide thin films were deposited on quartz by spin coating technique with four different rpm i.e., 1000, 2000, 3000 and 4000 and subsequently post annealed at 350, 450 and 550?°C in vacuum. Transmission electron microscopy (TEM), Field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) techniques were utilized for microstructural characterizations and phase analysis, respectively, for vanadium oxide powder and deposited film. Nanorods were observed to be grown after vacuum annealing. X-ray photoelectron spectroscopy (XPS) technique was utilized to study the elemental oxidation state of deposited vanadium oxide films. Thermo-optical and electrical properties such as solar transmittance (τ_s), reflectance (ρ_s), absorptance (α_s), infrared (IR) emittance (ε_ir) and sheet resistance (R_s) of different thin films were evaluated. Based on the optical characteristics the optimized condition of the film processing was identified to be spin coated at 3000?rpm. Subsequently, the nanoindentation technique was utilized to measure hardness and Young's modulus of the optimized film. The measured nanomechanical properties were found to be superior to those reported for sputtered vanadium oxide films. Finally, temperature dependent phase transition characteristics of optimized vanadium oxide films were studied by differential scanning calorimetry (DSC) technique. Reversible and repeatable phase transition was found to occur in the range of 44–48?°C which was significantly lower than the phase transition temperature (i.e., 68?°C) of bulk VO₂.     

Simple Sequence Repeat Markers in Genetic Divergence and Marker-Assisted Selection of Rice Cultivars: A Review

Sequencing of rice genome has facilitated the understanding of rice evolution and has been utilized extensively for mining of DNA markers to facilitate marker-assisted breeding. Simple sequence repeat (SSR) markers that are tandemly repeated nucleotide sequence motifs flanked by unique sequences are presently the maker of choice in rice improvement due to their abundance, co-dominant inheritance, high levels of allelic diversity, and simple reproducible assay. The current level of genome coverage by SSR markers in rice is sufficient to employ them for genotype identification and marker-assisted selection in breeding for mapping of genes and quantitative trait loci analysis. This review provides comprehensive information on the mapping and applications of SSR markers in investigation of rice cultivars to study their genetic divergence and marker-assisted selection of important agronomic traits.     

Synthesis of SBA 15 graphene oxide composite membrane using phenol–formaldehyde resin pore modifier for CO2 separation

Present study highlights the development of carbon-loaded SBA 15 membrane on clay-alumina tubular support and its performance on the CO₂ separation efficiencies from different mixture gases. To modify the large pores of SBA 15 by graphitic carbon, low molecular weight phenol–formaldehyde (PF) resin was incorporated into the mesoporous channel followed by calcination under inert atmosphere. The modified ordered pore structure of the membrane has been characterized by low-angle XRD, TEM, and pore size distribution analysis. The chemical state of the deposited carbon phase into the SBA 15 pores was analyzed by X-ray photoelectron and Raman spectroscopy. Carbon having graphitic nature mainly in graphene oxide has been deposited into the mesopore of SBA 15 resulting decrease in pore size from 8.9 to 1.0 nm. Finally, the developed SBA 15 carbon membranes were characterized by CO₂ permeation and separation selectivity of CO₂/CH₄, CO₂/CO. Highest CO₂/CH₄ separation factor was achieved as 16.9 with CO₂ permeance 13.6 × 10^–8 mol/m²/s/Pa at 200 kPa feed pressure by the 20% resin with 2 times coated membrane. In flue gas analysis, highest CO₂/CO separation factor of 32.8 was achieved. This study offers an observation on CO₂ separation from simulated BF gas for the first time and the results show the potential of the developed SBA 15/C composite membranes in commercial application.     

Synthesis,Characterization, and drug release study of acrylamide‐co‐itaconic acid based smart hydrogel

A new kind of pH and temperature responsive poly(acrylamide‐co‐itaconic acid) hydrogel was prepared by free radical polymerization using ammonium persulfate as initiator and different comonomer ratios. The hydrogels were characterized in terms of chemical composition, swelling‐deswelling behavior, morphology, crystallographic behavior, and drug release properties. All the hydrogels showed high swelling ability in aqueous solutions, the maximum being at pH 7. Swelling decreased on either side of pH 7 (i.e., both in acidic and alkaline region) and increased with increase in temperature. The hydrogel with 10 mol% itaconic acid (IA) absorbed maximum water among the copolymer gels. The cellular structures of the hydrogels were clearly revealed by microscopic analysis and SEM pictures. Swelling of the gels in water followed non‐Fickian type of diffusion principle. The hydrogel was proved to be a controlled release vehicle, for example in drug delivery by using its smart properties. The hydrogel with 10 mol% IA also absorbed maximum amount of drug (ascorbic acid) under study. Incorporation of drug in hydrogel matrix was established from XRD peak analysis. POLYM. ENG. SCI., 55:113–122, 2015. © 2014 Society of Plastics Engineers     

An Improved Method for Load Taxonomy Using Sample Shifting Technique and Signature Analysis

This paper illustrates an improved method of classification of electrical appliances, particularly for domestic loads, to construct load taxonomy on the basis of their signature analysis. Each electrical load is characterized by its own distinct signature and hence load signature analysis is useful in monitoring the health of the equipment, power quality, in determining individual energy usage etc. type of services. On the other hand, load taxonomy classifies these loads in several clusters on the basis of some features extracted from their signatures. In traditional methods of construction of load taxonomy, different signature patterns based on power metrics, V-I trajectories, Eigen vectors, etc. In this proposed method, with the adoption of sample shifting technique the required number of feature extraction is reduced to a lower value to find out various signature patterns than those are required in traditional load taxonomies. Moreover, a better taxonomy, having well separated groups of loads is achieved with lower number of extracted features.     

An adaptive penalty function-based maximin desirability index for close tolerance multiple-response optimization problems

Simultaneous optimization of multiple-quality characteristics and determining the process settings is a critical and difficult task for practitioners. Such types of problems are generally referred to as “multiple-response optimization” problems. To handle high-dimensional multiple-response problems, a popular strategy, using desirability functions, is recommended by various researchers. Various types of desirability index functions are recommended to convert multiple scale-free desirability measures to a single composite desirability (or single objective) value. Thus, the objective is then to maximize the single composite desirability for a specific problem. In this paper, a new adaptive penalty function-based “maximin” desirability index is proposed, which provide superior solution as compared to existing maximin approach, for close (or tight) engineering tolerances of response characteristics. The superiority was proved based on statistical comparison using varied case situations and different swarm intelligent search strategies.     

Analytical study on optimal distribution of heating power in hyperthermia

In this paper we have investigated analytically optimal distribution of time dependent heating power Q₂(t)(W/m²) in a system, described by bio-heat equation in a multilayered tissue, consisting of skin, fat, muscle and tumor layers, so as to attain a beneficial desired temperature χ^? across the entire length of the tumor. The desired temperature of the tumor is achieved at the end of time of operation of the process when the surface cooling temperature is taken as constant. The spatial heating power per unit volume Q₁(x,t)(W/m³) is constructed according to the well known Beer's Law [1], given by, Q₁(x,t) = βe^− βxQ₂(t) when β is scattering coefficient.