An efficient verifiable (t,n)-threshold secret image sharing scheme with ultralight shares

Multimedia Tools and Applications - A secret sharing scheme partitions a secret into a set of shares and distributes them among the eligible participants, with each participant receiving one share...     

Synthesis,structure, CO oxidation,and H2 production activities of CaCu3−xMnxTi4−xMnxO12 (x = 0, 0.5, and 1.0)

Synthesis of nanocrystalline pristine and Mn-doped calcium copper titanate quadruple perovskites, CaCu_3?xMn_xTi_4?xMn_xO₁₂ (x = 0, 0.5, and 1.0) by modified citrate solution combustion method has been reported. Powder X-ray diffraction patterns attest the phase purity of the perovskite materials. Average particle sizes of all the materials obtained from the Scherrer's formula are in the range of 55–70 nm. The specific surface areas for all the perovskites obtained from BET isotherms are found to be low as expected for the condensed oxide systems and fall in the range of 13–17 m² g^?1. Transmission electron microscopy studies show a reduction in particle size of CaCu₃Ti₄O₁₂ with increase in Mn doping. Ca and Ti are present in +2 and +4 oxidation states in all the materials as demonstrated by X-ray photoelectron spectroscopy analyses. Cu²⁺ gets reduced in CaCu₃Ti₄O₁₂ with higher Mn content. Mn is observed to be present only in +3 oxidation state. All the materials have been examined to be active in CO oxidation as well as H₂ production from methanol steam reforming. CaCu₃Ti₄O₁₂ with ~14 at.% Mn is found to show best catalytic activities among these materials. A comprehensive analysis of the catalytic activities of these perovskites toward CO oxidation and H₂ production from MSR reveal the cooperative activity of copper-manganese in the doped perovskites and it is more effective at lower manganese content.     

A tamper detection suitable fragile watermarking scheme based on novel payload embedding strategy

Multimedia Tools and Applications - Intentional tampering in digital image content is one of the common malpractices in the current digital arena. So in this paper, the authors have proposed a...     

Electrical conductivity of poly(vinyl alcohol)/carbon nanotube multilayer thin films: Influence of sodium polystyrene sulfonate mediated carbon nanotube dispersion

This investigation was aimed to enhance the dispersibility of multi-walled carbon nanotubes (MWCNT) using sodium polystyrene sulfonate (Na-PSS) polyelectrolyte. Subsequently, electrically conducting, multi-layer thin films are prepared utilizing layer by layer assembly method with poly(vinyl alcohol) as a host matrix. The highest extent of MWCNT dispersion was observed in MWCNT:Na-PSS ratio of 1:9 (wt/wt), which was estimated from UV-Vis spectroscopic analysis. Zeta potential measurements of Na-PSS modified MWCNT dispersion showed large negative potentials ranging from −52 to −64 mV in the most stable pH range of 4 to 10, suggesting the colloidal stability is due to the long-range repulsive nature of electrostatic interactions from negatively charged sulfonate groups. Complementary molecular dynamics simulations showed that adsorption of Na-PSS imparts a large negative potential to the carbon nanotube surface, which increases with an increase in Na-PSS concentration. The multi-layer thin film of (1:9) MWCNT:Na-PSS exhibited a DC electrical conductivity of 2.96 × 10² S/m.     

Smelting Process of Chromite Ore Fines to Produce Crude Fe–Cr–Ni–N Alloy

Transactions of the Indian Institute of Metals - The smelting behavior of waste chromite ore fines containing Cr and Ni to produce crude Fe–Cr–Ni–N alloy was investigated in this...     

超低温强热型"数码涡旋"的应用与发展

如何提高空调机组的能效目前已经成为空调行业的发展方向。在小型中央空调领域,日本厂家从90年代初开始着手将变频技术成功应用于"商用多联机系统",并从90年代的"交流变频"技术发展到2003年开始采用"直流变频"技术。同时,艾默生旗下的环境优化技术部门从1993年开始着手研发"数码涡旋"变容量技术,并从1997年开始在机房空调应用中测试,相继开发船舶用冷冻机组,并供应亚洲与中国市场。     

Visible Light Photocatalysis on Magnetically Recyclable Fe3O4/Cu2O Nanostructures

Catalysis Letters - Magnetically recyclable visible light photocatalysts for the degradation of critical organic pollutants are an urgent industrial requirement. Nonetheless, one component...     

Hybrid anion exchanger for trace phosphate removal from water and wastewater

Throughout recent decades, the wastewater treatment industry has identified the discharge of nutrients, including phosphates and nitrates, into waterways as a risk to natural environments due to the serious effects of eutrophication. For this reason, new tertiary treatment processes have abounded; these processes generally utilize physico-chemical and biological methods to remove nutrients from secondary wastewaters. The disadvantages of such methods involve larger reactor volumes, operating costs, and waste sludge production; furthermore, complete nutrient removal is unattainable due to thermodynamic and kinetic limitations. The subject study presents the development and performance of a new phosphate-selective sorbent, referred to as hybrid anion exchanger or HAIX. HAIX combines durability and mechanical strength of polymeric anion exchange resins with high sorption affinity of hydrated ferric oxide (HFO) toward phosphate. HAIX is essentially a polymeric anion exchanger within which HFO nanoparticles have been dispersed irreversibly. Laboratory studies show that HAIX selectively removes phosphate from the background of much higher concentrations of competing sulfate, chloride and bicarbonate anions due to the combined presence of Coulombic and Lewis acid-base interactions. Experimental results demonstrate that HAIX's phosphate-sulfate separation factor is over two orders of magnitude greater than that of currently available commercial ion exchange resins. Additionally, optimal HAIX performance occurs at typical secondary wastewater pH conditions i.e., around 7.5. HAIX is amenable to efficient regeneration and reuse with no noticeable loss in capacity.     

The simultaneous addition of styrene maleic anhydride copolymer and multiwall carbon nanotubes during melt‐mixing on the morphology of binary blends of polyamide6 and acrylonitrile butadiene styrene copolymer

The effect of simultaneous addition of multiwall carbon nanotubes (MWNTs) and a reactive compatibilizer (styrene maleic anhydride copolymer, SMA) during melt‐mixing on the phase morphology of 80/20 (wt/wt) PA6/ABS blend has been investigated. Morphological analysis through scanning and transmission electron microscopic analysis revealed finer morphology of the blends in presence of SMA + MWNTs. Fourier transform infrared spectroscopic analysis indicated the formation of imide bonds during melt‐mixing. Non‐isothermal crystallization studies exhibited the presence of a majority faction of MWNTs in the PA6 phase of 80/20 (wt/wt) PA6/ABS blend in presence of SMA + MWNTs. Rheological analysis, dynamic mechanical thermal analysis, and thermogravimetric analysis have demonstrated the compatibilization action of simultaneous addition of a reactive compatibilizer (SMA copolymer) and MWNTs in PA6/ABS blends. An attempt has been made to investigate the role of simultaneous addition of SMA copolymer and MWNTs on the morphology of 80/20 (wt/wt) PA6/ABS blend through various characterization techniques. POLYM. ENG. SCI., 55:457–465, 2015. © 2014 Society of Plastics Engineers     

Effect of Alumina Reactivity on the Densification and Properties of Al2O3–Cr2O3 Refractories

Alumina‐chrome (Al₂O₃–Cr₂O₃) refractories with Al₂O₃:Cr₂O₃ molar ratio 1:1 were synthesized in the temperature range of 1400–1700°C by conventional solid–oxide reaction route. The effect of different aluminas (viz., hydrated and calcined) on the densification, microstructure, and properties of Al₂O₃–Cr₂O₃ refractories was investigated without changing the Cr₂O₃ source. The starting materials were analyzed to determine the chemical composition, mineralogy, density, surface area, and particle size. Sintered materials were characterized in terms of densification, phase assemblage, and mechanical strength at room temperature and at higher temperatures. Microstructural evolution at different sintering temperature was correlated with sintering characteristics. It can be concluded that the Al₂O₃–Cr₂O₃ refractories prepared with hydrated alumina as Al₂O₃ source show better densification and hot mechanical strength than corresponding calcined variety.