Synthesis of an AlN Polycrystalline Bulk Layer and Nanotubes by Using NH3 and Bi

A bulk layer of aluminum nitride (AlN) polycrystals was synthesized on a boron nitride crucible surface by heating Al chunks with 5 mol% of bismuth at 1273 K for 3 h under NH₃ gas flow. The fragments of the layer were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The platelet grains of AlN with a size of 0.1–1.0 μm and having preferred orientation of the c -axis perpendicular to the layer were formed at the crucible side. Nanotubes 6–15 μm long and about 20–100 nm thick grew on the gas phase side of the layer.     

Design of new catalysts for ecological high-quality transportation fuels by combinatorial computational chemistry and tight-binding quantum chemical molecular dynamics approaches

Recently, we introduced a concept of combinatorial chemistry to computational chemistry and proposed a new method called “combinatorial computational chemistry”, which enables us to perform a theoretical high-throughput screening of catalysts. In the present paper, we reviewed our recent application of our combinatorial computational chemistry approach to the design of new catalysts for high-quality transportation fuels. By using our combinatorial computational chemistry techniques, we succeeded to predict new catalysts for methanol synthesis and Fischer–Tropsch synthesis. Moreover, we have succeeded in the development of chemical reaction dynamics simulator based on our original tight-binding quantum chemical molecular dynamics method. This program realizes more than 5000 times acceleration compared to the regular first-principles molecular dynamics method. Electronic- and atomic-level information on the catalytic reaction dynamics at reaction temperatures significantly contributes the catalyst design and development. Hence, we also summarized our recent applications of the above quantum chemical molecular dynamics method to the clarification of the methanol synthesis dynamics in this review.     

Gelation of poly(vinyl alcohol)/phenol/water solutions and gel spinning

The light transmittance of the gels of poly(vinyl alcohol) (PVA)/phenol/water solutions was examined for the entire range of phenol/water content. Excellent transparency was found for the gels with phenol contents of 70–95 vol %. In full consideration of the results for the transparency and melting temperature of the gels and the viscosity and gelation ability of solutions, the PVA solutions of 75 vol % phenol content were selected for the gel spinning. The maximum dynamic moduli of drawn filaments at 25°C (room temperature) were 42 GPa (15x) for atactic PVA and 45 GPa (14x) for syndiotacticity-rich PVA. © 1995 John Wiley & Sons, Inc.     

Densification and Cell Performance of Gadolinium-Doped Ceria (GDC) Electrolyte/NiO–GDC Anode Laminates

A thin film (60 μm thick) of a gadolinium-doped ceria (GDC) electrolyte was prepared by the doctor blade method. This film was laminated with freeze-dried 42 vol% NiO–58 vol% GDC mixed powder and pressed uniaxially or isostatically under a pressure of 294 MPa. This laminate was cosintered at 1100 °–1500 °C in air for 4–12 h. The laminate warped because of the difference in the shrinkage of the electrolyte and electrode during the sintering. A higher shrinkage was measured for the electrode at 1100 °–1200 °C and for the electrolyte at 1300 °–1500 °C. The increase of the thickness of anode was effective in decreasing the warp and in increasing the density of the laminated composite. The maximum electric power density with a SrRuO₃ cathode using 3 vol% H₂O-containing H₂ fuel was 100 mW/cm² at 600 °C and 380 mW/cm² at 800 °C, respectively, for the anode-supported GDC electrolyte with 30 μm thickness.     

The effect of small dose of topiroxostat on serum uric acid in patients receiving hemodialysis

Introduction : Topiroxostat, a recently developed xanthine oxidase inhibitor, is expected to have fewer adverse effects than allopurinol because it has different mechanism of action from alloprinol. However, its dosage, usage and safety have not been established in patients with impaired renal function or those undergoing dialysis at the development since no studies was conducted in these patients. Methods : Cross over clinical trial using 3 months of allopurinol and topiroxostat on 27 maintain Japanese HD patients were carried out. The effects on oxidative stress status of both drugs were also evaluated by measuring oxidation reduction potential. Findings : Twenty‐five of twenty‐seven patients completed study. The mean serum uric acid levels in the topiroxostat‐treated arm was significantly lower than it in the allopurinol‐treated arm time‐dependently (P < 0.0001). Corrected oxidative stress ratio defined as biological antioxidant potential/diacron reactive oxygen metabolites was significantly increased in topiroxostat‐arm (*P = 0.0035), but not in allopurinol‐arm (P = 0.1429). No significant difference was seen in diacron reactive oxygen metabolites, biological antioxidant potential, static oxidation‐reduction potential, and capacity oxidation‐reduction potential between pre and post treatment of both drugs. Discussion : It is suggested that a low dose of topiroxostat decreased serum uric acid sufficiently to maintain it below 7.0 mg/dL in patients receiving hemodialysis.     

Solar or surplus heat-driven actuators using metal hydride alloys

A metal hydride (MH) actuator provides mechanical work by applying the hydrogen pressure transition that originates from the reversible reaction of the MH alloy as it absorbs and desorbs hydrogen gas. The MH actuators that have been reported employ a Peltier element or an electrical heating resistance wire as a heat source. This paper describes the design of an MH actuator that is driven by low-quality heat sources, such as solar heat or surplus heat. A certain composition of a LaNi₅-based alloy that produces desorbing and absorbing reactions through a low-temperature difference is specified. This alloy composition can provide a large amount of hydrogen desorption using solar heat or surplus heated water and a large amount of hydrogen absorption by natural air cooling in an adequate reaction time. To improve the moving speed and to control the performance, a reciprocating air compressor that applies this solar or surplus heat-driven MH actuator is proposed. These findings support the efficacy of an MH actuator operating without electric or fossil fuel energy consumption.     

Describing Upper-Body Motions Based on Labanotation for Learning-from-Observation Robots

We have been developing a paradigm that we call learning-from-observation for a robot to automatically acquire a robot program to conduct a series of operations, or for a robot to understand what to do, through observing humans performing the same operations. Since a simple mimicking method to repeat exact joint angles or exact end-effector trajectories does not work well because of the kinematic and dynamic differences between a human and a robot, the proposed method employs intermediate symbolic representations, tasks, for conceptually representing what-to-do through observation. These tasks are subsequently mapped to appropriate robot operations depending on the robot hardware. In the present work, task models for upper-body operations of humanoid robots are presented, which are designed on the basis of Labanotation. Given a series of human operations, we first analyze the upper-body motions and extract certain fixed poses from key frames. These key poses are translated into tasks represented by Labanotation symbols. Then, a robot performs the operations corresponding to those task models. Because tasks based on Labanotation are independent of robot hardware, different robots can share the same observation module, and only different task-mapping modules specific to robot hardware are required. The system was implemented and demonstrated that three different robots can automatically mimic human upper-body operations with a satisfactory level of resemblance.     

Use of solid phase microextraction (SPME) for profiling the volatile metabolites produced by Glomerella cingulata

The profile of volatile organic compounds (VOCs) released from Glomerella cingulata using solid phase microextraction (SPME) with different fibers, Polydimethylsiloxane (PDMS), Polydimethylsiloxane/Divinylbenzene (PDMS/DVB), Carboxen/Polydimethylsiloxane (CAR/PDMS) and Divinylbenzene/Carboxen/Polydimethylsiloxane (DVB/CAR/PDMS), was investigated. C4-C6 aliphatic alcohols were the predominant fraction of VOCs isolated by CAR/PDMS fiber. Sesquiterpene hydrocarbons represented 20.3% of VOCs isolated by PDMS fiber. During the growth phase, Ochracin was produced in the large majority of VOCs. 3-Methylbutanol and phenylethyl alcohol were found in the log phase of it. Alcohols were found in cultures of higher age, while sesquiterpenes were found to be characteristic of initial growth stage of G. cingulata.