Gas‐phase removal of indoor volatile organic compounds and airborne microorganisms over mono‐ and bimetal‐modified (Pt,Cu, Ag) titanium(IV) oxide nanocomposites

The photocatalytic deactivation of volatile organic compounds and mold fungi using TiO₂ modified with mono‐ and bimetallic (Pt, Cu, Ag) particles is reported in this study. The mono‐ and bimetal‐modified (Pt, Cu, Ag) titanium(IV) oxide photocatalysts were prepared by chemical reduction method and characterized using XRD, XPS, DR/UV‐Vis, BET, and TEM analysis. The effect of incident light, type and content of mono‐ and bimetallic nanoparticles deposited on titanium(IV) oxide was studied. Photocatalytic activity of as‐prepared nanocomposites was examined in the gas phase using LEDs array. High photocatalytic activity of Ag/Pt‐TiO₂ and Cu/Pt‐TiO₂ in the reaction of toluene degradation resulted from improved efficiency of interfacial charge transfer process, which was consistent with the fluorescence quenching effect revealed by photoluminescence (PL) emission spectra. The photocatalytic deactivation of Penicillium chrysogenum, a pathogenic fungi present in the indoor environment, especially in a damp or water‐damaged building using mono‐ and bimetal‐modified (Pt, Cu, Ag) titanium(IV) oxide was evaluated for the first time. TiO₂ modified with mono‐ and bimetallic NPs of Ag/Pt, Cu, and Ag deposited on TiO₂ exhibited improved fungicidal activity under LEDs illumination than pure TiO₂.     

Phosphoproteomic Analysis of Subcutaneous and Omental Adipose Tissue Reveals Increased Lipid Turnover in Dairy Cows Supplemented with Conjugated Linoleic Acid

Phosphoproteomics is a cutting-edge technique that can be utilized to explore adipose tissue (AT) metabolism by quantifying the repertoire of phospho-peptides (PP) in AT. Dairy cows were supplemented with conjugated linoleic acid (CLA, n = 5) or a control diet (CON, n = 5) from 63 d prepartum to 63 d postpartum; cows were slaughtered at 63 d postpartum and AT was collected. We performed a quantitative phosphoproteomics analysis of subcutaneous (SC) and omental (OM) AT using nanoUPLC-MS/MS and examined the effects of CLA supplementation on the change in the phosphoproteome. A total of 5919 PP were detected in AT, and the abundance of 854 (14.4%) were differential between CON and CLA AT (p ≤ 0.05 and fold change ± 1.5). The abundance of 470 PP (7.9%) differed between OM and SC AT, and the interaction treatment vs. AT depot was significant for 205 PP (3.5% of total PP). The integrated phosphoproteome demonstrated the up- and downregulation of PP from proteins related to lipolysis and lipogenesis, and phosphorylation events in multiple pathways, including the regulation of lipolysis in adipocytes, mTOR signaling, insulin signaling, AMPK signaling, and glycolysis. The differential regulation of phosphosite on a serine residue (S777) of fatty acid synthase (FASN) in AT of CLA-supplemented cows was related to lipogenesis and with more phosphorylation sites compared to acetyl-coenzyme A synthetase (ACSS2). Increased protein phosphorylation was seen in acetyl-CoA carboxylase 1 (ACACA;8 PP), FASN (9 PP), hormone sensitive lipase (LIPE;6 PP), perilipin (PLIN;3 PP), and diacylglycerol lipase alpha (DAGLA;1 PP) in CLA vs. CON AT. The relative gene expression in the SC and OM AT revealed an increase in LIPE and FASN in CLA compared to CON AT. In addition, the expression of DAGLA, which is a lipid metabolism enzyme related to the endocannabinoid system, was 1.6-fold higher in CLA vs. CON AT, and the expression of the cannabinoid receptor CNR1 was reduced in CLA vs. CON AT. Immunoblots of SC and OM AT showed an increased abundance of FASN and a lower abundance of CB1 in CLA vs. CON. This study presents a complete map of the SC and the OM AT phosphoproteome in dairy cows following CLA supplementation and discloses many unknown phosphorylation sites, suggestive of increased lipid turnover in AT, for further functional investigation.     

On comparison of luminescence properties of La2Zr2O7 and La2Hf2O7 nanoparticles

Unveiling the underlying mechanisms of properties of functional materials, including the luminescence differences among similar pyrochlores A₂B₂O₇, opens new gateways to select proper hosts for various optoelectronic applications by scientists and engineers. For example, although La₂Zr₂O₇ (LZO) and La₂Hf₂O₇ (LHO) pyrochlores have similar chemical compositional and crystallographic structural features, they demonstrate different luminescence properties both before and after doped with Eu³⁺ ions. Based on our earlier work, LHO-based nanophosphors display higher photo- and radioluminescence intensity, higher quantum efficiency, and longer excited state lifetime compared to LZO-based nanophosphors. Moreover, under electronic O²⁻→Zr⁴⁺/Hf⁴⁺ transition excitation at 306 nm, undoped LHO nanoparticles (NPs) have only violet blue emission, whereas LZO NPs show violet blue and red emissions. In this study, we have combined experimental and density functional theory (DFT) based theoretical calculation to explain the observed results. First, we calculated the density of state (DOS) based on DFT and studied the energetics of ionized oxygen vacancies in the band gaps of LZO and LHO theoretically, which explain their underlying luminescence difference. For Eu³⁺-doped NPs, we performed emission intensity and lifetime calculations and found that the LHOE NPs have higher host to dopant energy transfer efficiency than the LZOE NPs (59.3% vs 24.6%), which accounts for the optical performance superiority of the former over the latter. Moreover, by corroborating our experimental data with the DFT calculations, we suggest that the Eu³⁺ doping states in LHO present at exact energy position (both in majority and minority spin components) where oxygen defect states are located unlike those in LZO. Lastly, both the NPs show negligible photobleaching highlighting their potential for bioimaging applications. This current report provides a deeper understanding of the advantages of LHO over LZO as an advanced host for phosphors, scintillators, and fluoroimmunoassays.     

The effect of synthesis conditions on the physicochemical properties of magnesium aluminate materials

Magnesium aluminate-based materials were prepared by applying different methods: (i) mechanochemical milling of the initial mixture of magnesium and aluminium nitrate powders (in appropriate stoichiometric amounts) followed by heat treatment at temperatures of 650 °C and 850 °C and (ii) melting of the mixture of nitrate precursors at 240 °C followed by thermal treatment at 650 °C, 750 °C and 850 °C. The effect of synthesis method on the structure and morphology of the obtained solids was studied by using various techniques such as: nitrogen adsorption-desorption isotherms, powder XRD, IR spectroscopy and SEM. It was shown that the mechanochemical milling performed before calcination procedure leads to obtaining of nanocrystalline magnesium aluminate spinel phase at lower temperature of 650 °C in comparison with the method using thermal treatment only (at 750 °C). The obtained nanomaterials exhibit mesoporous structure.     

Fault estimation and tolerant control for discrete‐time switched systems with sojourn probabilities

This paper addresses the issue of fault estimation and accommodation for a discrete‐time switched system with actuator faults. Here, we assume that the sojourn probabilities are known a priori. By using the reduced‐order observer method, the sojourn probability approach, and the Lyapunov technique, a fault estimation algorithm is obtained for the considered system. The main objective of this work is to design a dynamic output feedback fault‐tolerant controller based on the obtained fault estimation information such that the closed‐loop discrete‐time switched system with available sojourn probabilities is robustly mean‐square stable and satisfies a prescribed mixed and passivity disturbance attenuation level in the presence of actuator faults. More precisely, a dynamic output feedback fault‐tolerant controller is established in terms of linear matrix inequalities. Finally, numerical examples are provided to illustrate the usefulness and effectiveness of the proposed design technique.     

Efficacy and Mechanisms of Communication Disruption of the Red Clover Casebearer Moth (Coleophora deauratella) with Complete and Partial Pheromone Formulations

The red clover casebearer, Coleophora deauratella Leinig and Zeller (Lepidoptera: Coleophoridae), is a major pest of red clover (Trifolium pratense L.) grown for seed in Canada and parts of Europe. Insecticides are ineffective against C. deauratella, and other control methods, such as pheromone-mediated mating disruption, need to be explored. The efficacy and mechanisms of communication disruption were evaluated in small-plot trials (0.25 ha) with reservoir-type rope dispensers loaded with either the complete pheromone blend [10:1 ratio of (Z)-7-dodecenyl acetate: (Z)-5-dodecenyl acetate] or the major component alone [(Z)-7-dodecenyl acetate]. Both formulations reduced catches of male C. deauratella in pheromone traps (>99.6 %). In pheromone-treated plots, more males were caught on yellow sticky cards near dispensers that released the complete pheromone blend, than on cards near dispensers releasing the major component. In the laboratory, after pre-exposure to either the complete blend or the major component for 1 h, male C. deauratella antennae became adapted, as measured by electroantennograms conducted 5 min. after treatment. Adaptation due to pre-exposure to either formulation resulted in a shift in the pheromone response threshold; antennae from pre-exposed moths responded more strongly to high pheromone dosages (5–50 μg) than did antennae from untreated control moths. Antennae from moths held in clean air for 24 h after pre-exposure recovered and responded similarly to pheromone as antennae from control moths. These results suggest that both formulations have the potential to disrupt pheromone communication in C. Deauratella, but that the disruption mechanisms of the two formulations likely differ.     

Catalytic constants enable the emergence of bistability in dual phosphorylation

Dual phosphorylation of proteins is a principal component of intracellular signalling. Bistability is considered an important property of such systems and its origin is not yet completely understood. Theoretical studies have established parameter values for multistationarity and bistability for many types of proteins. However, up to now no formal criterion linking multistationarity and bistability to the parameter values characterizing dual phosphorylation has been established. Deciding whether an unclassified protein has the capacity for bistability, therefore requires careful numerical studies. Here, we present two general algebraic conditions in the form of inequalities. The first employs the catalytic constants, and if satisfied guarantees multistationarity (and hence the potential for bistability). The second involves the catalytic and Michaelis constants, and if satisfied guarantees uniqueness of steady states (and hence absence of bistability). Our method also allows for the direct computation of the total concentration values such that multistationarity occurs. Applying our results yields insights into the emergence of bistability in the ERK–MEK–MKP system that previously required a delicate numerical effort. Our algebraic conditions present a practical way to determine the capacity for bistability and hence will be a useful tool for examining the origin of bistability in many models containing dual phosphorylation.     

High porosity,responsive hydrogel copolymers from emulsion templating

Hydrogels, three‐dimensional hydrophilic polymer network structures, can absorb many times their dry weight in water. PolyHIPEs are highly porous polymers synthesized within high internal phase emulsions (HIPEs). Here, the water uptakes in novel hydrogel polyHIPE copolymers of hydroxyethyl methacrylate (HEMA, a non‐ionic monomer) and methacrylic acid (MAA, an ionic monomer) were investigated. The PHEMA‐based polyHIPE had a density of 0.14 g cm^?3, void diameters of 50–100 µm and a void‐dominated Fickian water uptake of around 10.4 g g^?1. The polyHIPE density increased, and the porous structure became less polyHIPE‐like, with increasing MAA content, reflecting a reduction in the stability of the HIPE. The water uptake increased with increasing pH for all the copolymers and the water absorption mechanism changed from Fickian at pH 2 to anomalous, dominantly case II, at pH 10. The maximum uptake of 18.2 g g^?1 at pH 10, for a HEMA to MAA mass ratio of 1/1, was ascribed to hydrogel‐swelling‐driven void expansion. The hydrogel's absorptive and responsive properties were amplified by the polyHIPE's porous structure. These results demonstrate that the compositions of hydrogel polyHIPE copolymers can be designed to enhance their water uptake. © 2015 Society of Chemical Industry     

A new approach to the preparation of large surface area poly(styrene-co-divinylbenzene) monoliths via knitting of loose chains using external crosslinkers and application of these monolithic columns for separation of small molecules

Poly(styrene-divinylbenzene) monoliths have been hypercrosslinked using a Fe³⁺ catalyzed Friedel–Crafts reaction involving three external crosslinkers (1) 4,4′-bis(chloromethyl)-1,1′-biphenyl, (2) α,α′-dichloro-p-xylene, and (3) formaldehyde dimethyl acetal. The first crosslinker was found to produce monoliths with the best chromatographic performance. The effects of a number of variables affecting the hypercrosslinking reaction were studied in detail. These variables included: (i) the temperature and time used for polymerization of the precursor monoliths, (ii) the amount and loading procedure of the external crosslinker and catalyst, and, (iii) the temperature and reaction time of the Friedel–Crafts alkylation. Polymers with extremely large surface areas reaching up to 900 m²/g were obtained using a precursor monolith polymerized for only 2.5 h, and hypercrosslinked with 4,4’-bis(chloromethyl)-1,1′-biphenyl. The increased performance of monoliths modified using this new procedure is comparable to the performance obtained with monolithic polymers containing chloromethylstyrene. However, the preparation of the poly(styrene-divinylbenzene) precursor is simpler than that of conterparts containing chloromethylstyrene. The hypercrosslinked monoliths in capillary columns were tested in an isocratic reversed phase liquid chromatography separation using a mixture comprised of acetone and six alkylbenzenes. Column efficiencies for retained analytes exceeded 70,000 plates/m.