Effect of heating and acidic pH on characteristics of wheat gluten suspension

The effects of different pH treatments with and without heating on the characteristics of wheat gluten suspension was investigated. At pH 1, maximum changes in colour were observed with a concurrent 65% decrease in protein free-thiol content compared to the control gluten. The SDS-Extractability of protein (SDS-EP) chromatogram eluted at lower retention time and the presence of bands at the top lane even during reducing conditions in SDS-PAGE gel suggested complex formation involving bonds other than disulphides. An increase in the free-amino group content and the presence of an additional peak at a higher retention time in the SDS-EP chromatogram was suggestive of hydrolysis. At pH 2 and 3, similar decreases in SDS-EPs and free-thiol content indicated formation of complexes. When heated, the free-thiol content of the dispersions increased compared to the non-heated dispersions indicating disruption of disulphide bonds with changes in gluten structure and size distribution.     

Antimicrobial Activity of Natural Agents against Saccharomyces cerevisiae

The antimicrobial (AM) activity of starch‐based films coated with linalool, carvacrol or thymol against Saccharomyces cerevisiae in vitro and/or inoculated on the surface of Cheddar cheese was investigated. In solid medium using the agar diffusion method and in experiments involving the inoculation of the microorganism on the surface of Cheddar cheese, all the films containing these AM agents in coatings demonstrated an inhibitory effect against S. cerevisiae. The results suggest that the overall inhibitory effect of linalool, carvacrol or thymol increased significantly (p ≤ 0.05) with the concentration of each of the AM agents in the film coating and that the response is linear in the concentration range of 1 to 5% (w/w) of the AM agent. Thymol had the highest AM efficacy followed by carvacrol, whereas linalool had the lowest efficacy amongst the three systems. The zones of inhibition in the agar diffusion test method at 25°C for S. cerevisiae were found to be 7.6, 7.1 and 6.1 mm for thymol, carvacrol and linalool at 1% (w/w) loading and 13.2, 12.2 and 11.2 mm at 5% (w/w) loading of the AM agents, respectively. The death rates of S. cerevisiae on Cheddar cheese wrapped in films coated with thymol, carvacrol and linalool and stored for up to 28 days at 15°C were found to be 0.044, 0.043 and 0.038 per day at 1% (w/w) loading and 0.077, 0.073 and 0.063 per day at 5% (w/w) loading of the AM agents, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and Thermal Behavior of Metallic Cobalt Micro and Nanostructures

Nano-Micro Letters - In this contribution, a comparative study of metallic cobalt micro and nanoparticles obtained in solution by four different chemical routes is reported. Classic routes such as...     

Correlation of the loss in photovoltaic module performance with the ageing behaviour of the backsheets used

The influence of the type of backsheet on the electrical performance of test modules was evaluated before and after increasing time of accelerated ageing (damp heat [DH] exposure). Besides the measurement of the electrical power of the modules and the performance of the cells by electroluminescence, the ageing‐induced changes within the polymeric encapsulate and backsheets were investigated by means of vibrational spectroscopy and by thermo analytical methods. In addition, the permeability of the backsheets in the original and aged state was determined. This wide set of test parameters and methods allowed for the detection of correlations between (i) physical and chemical properties as well as their ageing‐induced changes of the materials and (ii) the module performance. A clear dependence of the relative loss in power output upon exposure under DH conditions for 2000 h could be observed for a set of identical test modules varied in composition only in the type of back cover used. While the modules containing gas‐tight backsheets and glass experienced only little loss in the relative power output, some modules with permeable backsheets showed a significant relative decrease in the power output and fill factor in dependence of the backsheet type used. Cell degradation could be visualised by recording electroluminescence images before and after the accelerated ageing test. The permeation properties of the backsheet used and their ageing‐induced changes seem to have an influence on the module performance. However, the absolute values neither of the water vapour transmission rate (WVTR) nor of the oxygen transmission rate (OTR) are directly linked to the loss in power output upon accelerated ageing under DH conditions. It could be shown that the ageing‐induced changes (relative transmission rates) between WVTR and OTR can be correlated with the module performance. These ageing‐induced changes in the permeation behaviour of the backsheets can be explained by (i) physical changes (e.g. post‐crystallisation, changes in the crystal structure or the crystalline microstructure) and (ii) chemical ageing effects such as a decrease in the molecular mass of the polyester (PET) polymer chains because of hydrolytic polymer degradation leading to a change in the crystallisation behaviour of PET. Hydrolytic degradation (= chemical ageing) of the PET core layer was observed (with varying extent) for all PET‐based backsheets and can, thus, not be directly correlated with the loss in performance of the corresponding test modules. The physical ageing effects, however, were detected only for those backsheets showing (i) strong deviating changes in the relative permeation rates for oxygen and water vapour upon accelerated ageing and (ii) a clear loss in electrical performance. Copyright © 2015 John Wiley & Sons, Ltd.     

Gemeinsame österreichisch-ungarische Sedimentforschung im Rahmen des EFRE-Projektes SEDDON

The multiple uses of the Danube River for navigation, hydropower production and as a drinking water supply influence its ecological quality. Flow restrictions due to regulation as well as impacts on the sediment regime such as retention in the catchment area and interruption of the sediment continuum result in changes of the hydromorphological structures and can produce major problems in the context of sediment management. In light of these facts, cross-border investigations of sediment transport at the Danube River are called for. As there are no uniform research approaches shared by Austria and Hungary, the EU-funded project SEDDON (Sediment Research and Management at the Danube River) aims to compare different monitoring and modeling techniques used to determine sediment transport, and to develop mutual solutions. Further, the laboratory equipment currently used for hydraulic model experiments is evaluated and a research channel with a free flowing discharge of up to 10 m³/s without pumping will be constructed, allowing large-scale joint laboratory tests concerning sediment to be performed.     

Liquid chromatography–electrospray ionisation mass spectrometry method for the rapid identification of citrus limonoid glucosides in citrus juices and extracts

A rapid and selective liquid chromatography–electrospray ionisation mass spectrometry (LC–ESI-MS) method to screen citrus samples for limonoid glucosides and estimate their relative concentrations has been developed. This method utilises a phenyl stationary phase, whereas previous methods have relied on C-18. Samples may be analysed directly without treatment other than dilution. Peak areas from the extracted deprotonated molecular ion mass signals for individual limonoid glucosides were normalised against the sum of the areas to establish their relative concentrations. The method was successfully applied to the analysis of various juice, extracts, and liquid samples of partially purified limonoid glucosides.     

Functionalization of Polymer Surfaces Using Excimer VUV Systems and Silent Discharges. Application to Electroless Metallization

New approaches for electroless plating of nonconductive polymers or polymer-based materials are described. In this work, polyimide substrates were surface-functionalized (i) in nitrogenated (ammonia at reduced pressure) and oxygenated (air at atmospheric pressure) atmospheres under assistance of vacuum-ultraviolet (VUV) irradiation (use of a xenon silent discharge excimer source) or (ii) directly in air at atmospheric pressure using a dielectric-barrier discharge (DBD) device. After functionalization, the substrates were “activated” by dipping in a dilute acidic PdCl₂ solution or by spin-coating of a thin metal-organic film (from a solution of palladium acetate (PdAc) in chloroform). The catalytic activity of the so-deposited palladium species toward the electroless deposition of nickel was studied before and after a VUV post-irradiation (in air at atmospheric or reduced pressure) with a view to understanding better the role of the reducer (sodium hypophosphite) within the electroless bath.

This work confirms the specific interest of grafting nitrogenated functionalities onto polymer surfaces for attaching covalently the palladium-based catalyst (in particular in the case of the PdCl₂ route), forming thus strong Pd - N - C bonds at the metal/polymer interface. This results from the strong chemical affinity of palladium toward nitrogen. On the other hand, when oxygenated functionalities are surface-grafted, the conventional two-step procedure using SnCl₂ and PdCl₂ solutions can be proposed due to the strong chemical affinity of tin toward oxygen. The Ni deposits obtained under these different conditions pass the standard Scotch^®-tape test and, therefore, exhibit a good practical adhesion. For this same purpose, it is interesting to note that the DBD treatment operating in air at atmospheric pressure causes an increase of the surface roughness and, therefore, an improvement in adhesion of metallic films when their initiation is catalyzed through the PdAc route. In addition, this work demonstrates that extensive research still has to be performed to understand and improve the Ni/polymer adhesion when the PdAc route associated with a VUV irradiation is considered.     

Auswirkungen von Baggerungen und Verklappungen hochwasserbedingter Feinsedimentablagerungen am Fallbeispiel Winterhafen Linz/Donau

In the case study “Winterhafen Linz” the effects of dredging/excavating fine sediments previously deposited by flood events and their subsequent dumping into the Danube mainstream were investigated. While this maintenance work was in progress, the temporal and spatial extent of the sediment plume and the changes in bed topography were measured. By employing air-lift samplers and grab samplers in the dredging and dumping areas, the question as to whether, and if so to what extent, the benthic invertebrate community was disturbed by the maintenance work. It could be clearly demonstrated that the sediment dredging severely affected the benthic invertebrates (an 82 % decline in biomass), while the dumping of the material had no effects on the Danube biota. Numerical modeling was used to simulate discharges and dumping locations other than those actually encountered during the monitoring campaign, thus making it possible to extrapolate and draw conclusions beyond the concrete results. These findings in turn provided the basis for recommendations on how to optimize dredging and dumping procedures on the Danube in future.