Analysis of the Single-Crystalline Silicon Photovoltaic (PV) Module Performances Under Low γ - Radiation from Radioactive Source

The present paper is about an experimental evaluation of the terrestrial silicon single-crystalline solar PV module behavior under low gamma radiation. The     

Robust h-index

Scientometrics - The h-index is the most used measurement of impact for researchers. Sites such as Web of Science, Google Scholar, Microsoft Academic, and Scopus leverage it to show and compare the...     

Phosphorous limitation in an arctic river biofilm—A whole ecosystem experiment

A fourth-order arctic river was experimentally enriched with phosphate (7.7 ± 7.0 μ g 1⁻¹) to determine the effect of such a loading (equivalent to a community of 10,000 people) upon the trophically important biofilm. The effect upon a light-grown biofilm (an autotrophic/heterotrophic assemblage) and a dark-grown biofilm (predominantly heterotrophic assemblage) was determined after 28 days of colonization. Seven attributes of the biofilms were monitored, 2 autotrophic indices, chlorophyll , [¹⁴C]HCO₃ incorporation into lipids and 5 heterotrophic indices; [¹⁴C]acetate incorporation into lipids, metabolic heat output, turn-over times of microbially labile glucose and glutamate and mineralization of microbially recalcitrant ring-labelled [¹⁴C]hydroxybenzoic acid. The findings showed that the addition of phosphorus resulted in a substantial stimulation of both autotrophic and heterotrophic processes suggesting that arctic rivers of this type would be liable to cultural eutrophication.     

Effect of pasture versus indoor feeding systems on quality characteristics,nutritional composition,and sensory and volatile properties of full-fat Cheddar cheese

The purpose of this study was to investigate the effects of pasture-based versus indoor total mixed ration (TMR) feeding systems on the chemical composition, quality characteristics, and sensory properties of full-fat Cheddar cheeses. Fifty-four multiparous and primiparous Friesian cows were divided into 3 groups (n = 18) for an entire lactation. Group 1 was housed indoors and fed a TMR diet of grass silage, maize silage, and concentrates; group 2 was maintained outdoors on perennial ryegrass only pasture (GRS); and group 3 was maintained outdoors on perennial ryegrass/white clover pasture (CLV). Full-fat Cheddar cheeses were manufactured in triplicate at pilot scale from each feeding system in September 2015 and were examined over a 270-d ripening period at 8°C. Pasture-derived feeding systems were shown to produce Cheddar cheeses yellower in color than that of TMR, which was positively correlated with increased cheese β-carotene content. Feeding system had a significant effect on the fatty acid composition of the cheeses. The nutritional composition of Cheddar cheese was improved through pasture-based feeding systems, with significantly lower thrombogenicity index scores and a greater than 2-fold increase in the concentration of vaccenic acid and the bioactive conjugated linoleic acid C18:2 cis-9,trans-11, whereas TMR-derived cheeses had significantly higher palmitic acid content. Fatty acid profiling of cheeses coupled with multivariate analysis showed clear separation of Cheddar cheeses derived from pasture-based diets (GRS or CLV) from that of a TMR system. Such alterations in the fatty acid profile resulted in pasture-derived cheeses having reduced hardness scores at room temperature. Feeding system and ripening time had a significant effect on the volatile profile of the Cheddar cheeses. Pasture-derived Cheddar cheeses had significantly higher concentrations of the hydrocarbon toluene, whereas TMR-derived cheese had significantly higher concentration of 2,3-butanediol. Ripening period resulted in significant alterations to cheese volatile profiles, with increases in acid-, alcohol-, aldehyde-, ester-, and terpene-based volatile compounds. This study has demonstrated the benefits of pasture-derived feeding systems for production of Cheddar cheeses with enhanced nutritional and rheological quality compared with a TMR feeding system.     

On the improvement of network resource utilization efficiency for the establishment of static dependable connections in SRLG-constrained WDM translucent networks

In this paper, we investigate the problem of establishing static connections with fault-tolerant requirements, also known as dependable connections, taking into account quality of transmission constraints. To the best of our knowledge, this is the first study that tackles the aforementioned problem under shared risk link group (SRLG) constraints in translucent WDM optical mesh networks where typically a set of strategically localized network nodes are equipped with regeneration capability to overcome physical-layer impairment effects. A novel cross-layer heuristic approach is introduced to solve the problem for an heterogeneous networked scenario relying on a cost-effective two-stage protection procedure which combines the well-known path protection and partial path protection schemes in order to ensure instantaneous recovery from any SRLG-failure event. The proposed heuristic integrates a generic auxiliary graph model that incorporates various network heterogeneity factors such as the number of transceivers at each network node, the number of wavelengths on each fiber link, and the regeneration capability of each node, represented by different edges in the constructed graph. Moreover, the integrated auxiliary graph can be applied efficiently to model either single- or mixed-line-rate translucent WDM optical networks wherein different modulation formats are employed in order to support the transmission at different line rates. Our solution approach aims at maximizing the total number of accommodated requests by reducing network resource consumption through the simultaneous use of the backup–backup and primary–backup multiplexing techniques. We, here, present extended versions of these two techniques that generalize the sharing concept to some other important node resources—specifically, regeneration equipments which constitute the major cost factor in optical transport networks—in addition to link resources (i.e., wavelength channels). As far as we know, this is the first attempt to deploy simultaneously generalized versions of the backup–backup and primary–backup multiplexing techniques when considering static traffic patterns without compromising the 100 % fault-recoverability guarantee. The performances of the proposed heuristic are evaluated and discussed through extensive numerical experiments carried out on different network topologies. Significant improvements are demonstrated, either in terms of network blocking performance or in terms of resource utilization efficiency, in comparison with previously proposed approaches.     

Toward green dialysis: Focus on water savings

Hemodialysis is one of the most water and energy‐hungry medical procedures, and thus represents a clear opportunity where improvements should be made concerning the consumption and wastage of water. Three levels were investigated on which there are potential savings: the precise adjustment of water production according to specific needs, the reuse of reverse osmosis rejected water, and finally the huge volumes of post‐patient dialysate effluent. The “AURAL” (Association pour l′Utilisation du Rein Artificiel à Lyon), main unit in Lyon, was the site of investigation for this study, which cares for 173 chronic hemodialysis patients. Evaluation of the 3 levels described earlier was undertaken on this particular building, and on the water treatment currently used. Volumes of produced water can be improved by different hydraulic systems or by adjusting the pure water conductivity used for dialysis. Concerning the reject water, reuse for building sanitation became the focus of further attention. The technical feasibility, volume of saved water, and applicable work costs were considered. The results suggest that out of a possible 2834 m³/year of reject water, 1200 m³/year may be reused and return on investment recovered within 5.8 years. Finally, the reprocessing and feasibility of reuse of dialysate effluent were investigated. Initial calculations show that although technical solutions are available, such processing of the wastewater production is not profitable in the short term. Regarding the significant prior authorization and risk management analysis necessary for such a project, this avenue was pursued no further. From the perspective of a “green dialysis,” the reuse of reject water into sanitation is both viable and profitable in our unit, and must be the next step of our project. More widely, improvements can be made by defining a more precise range of pure water conductivity for dialysis and by applying reuse water project to new or to be renovated units.     

Statistical tolerance analysis of a hyperstatic mechanism,using system reliability methods

The quality level of a mechanism can be evaluated a posteriori after several months by following the number of warranty returns. However, it is more interesting to evaluate a predicted quality level in the design stage: this is one of the aims of statistical tolerance analysis. A possible method consists of computing the defect probability (P_D) expressed in ppm. It represents the probability that a functional requirement will not be satisfied in mass production. For assembly reasons, many hyperstatic mechanisms require gaps, which their functional requirements depend on. The defect probability assessment of such mechanisms is not straightforward, and requires advanced numerical methods. This problem particularly interests the VALEO W.S. company, which experiences problems with an assembly containing gaps. This paper proposes an innovative methodology to formulate and compute the defect probability of hyperstatic mechanisms with gaps in two steps. First, a complex feasibility problem is converted into a simpler problem. Then the defect probability is efficiently computed thanks to system reliability methods and the m-dimensional multivariate normal distribution Φ_m. Finally, a sensitivity analysis is provided to improve the original design. The whole approach is illustrated with an industrial case study, but can be adapted to other similar problems.     

Interaction between laser beam and BaTiO3 powders in selective laser sintering treatments

The research work reported in this paper is an investigation of the behavior of barium titanate powders under selective laser irradiation. Our goal is to determine suitable conditions to sinter the powders and form dense layers usable in some electronic components. On that purpose, compacts of micro/nano BaTiO₃ powder mixes are used for a parametric investigation of the laser scans parameters (power, speed, etc.) with a Nd-YVO₄ laser (23 W). The microstructures obtained after laser treatments are evaluated by XRD, SEM and EDS and compared to a reference specimen manufactured in a conventional way. From this work it can be concluded that a high laser beam power is required to obtain a consolidation of the powder grains and the use of a high scan speed avoids the melting. The scanning speed also influences the final crystallographic state of BaTiO₃. Optimal parameters were founded in order to form a dense and homogeneous tetragonal BaTiO₃ surface.     

Ultrathin PECVD epitaxial Si solar cells on glass via low‐temperature transfer process

Fabrication of high‐quality ultrathin monocrystalline silicon layers and their transfer to low‐cost substrates are key steps for flexible electronics and photovoltaics. In this work, we demonstrate a low‐temperature and low‐cost process for ultrathin silicon solar cells. By using standard plasma‐enhanced chemical vapor deposition (PECVD), we grow high‐quality epitaxial silicon layers (epi‐PECVD) from SiH₄/H₂ gas mixtures at 175 °C. Using secondary ion mass spectrometry and transmission electron microscopy, we show that the porosity of the epi‐PECVD/crystalline silicon interface can be tuned by controlling the hydrogen accumulation there. Moreover, we demonstrate that 13–14% porosity is a threshold above which the interface becomes fragile and can easily be cleaved. Taking advantage of the H‐rich interface fragility, we demonstrate the transfer of large areas (∽10 cm²) ultrathin epi‐PECVD layers (0.5–5.5 µm) onto glass substrates by anodic bonding and moderate annealing (275–350 °C). The structural properties of transferred layers are assessed, and the first PECVD epitaxial silicon solar cells transferred on glass are characterized. Copyright © 2016 John Wiley & Sons, Ltd.