Pregnancy by Assisted Reproductive Technology Is Associated with Shorter Telomere Length in Neonates

Telomere length (TL) influences the development of lifestyle-related diseases, and neonatal TL may influence their prevalence. Various factors have been reported to affect neonatal TL. Although the fetus is exposed to multiple conditions in utero, the main factors affecting the shortening of neonatal TL are still not known. In this study, we sought to identify factors that influence fetal TL. A total of 578 mother-newborn pairs were included for TL analysis. TL was measured in genomic DNA extracted from cord blood samples using quantitative PCR. The clinical factors examined at enrollment included the following intrauterine environmental factors: maternal age, assisted reproductive technology (ART) used, body mass index (BMI), gestational diabetes mellitus (GDM), maternal stress, smoking, alcohol consumption, preterm delivery, small-for-gestational-age, neonatal sex, and placental weight. Univariate and multivariate regression analyses were used to verify the relationship between neonatal TL and these clinical factors. The median neonatal TL to single-copy gene ratio was 1.0. Pregnancy with ART was among the 11 factors associated with shorter neonatal TL. From multiple regression analysis, we determined that neonatal TL was significantly shorter for pregnancies in the ART group than in the other groups. We conclude that pregnancy with ART is associated with shorter neonatal TL.     

Regional allocation of public investment

Conclusion In the previous Sections, we have observed the following interesting properties of the optimum solution to this regional allocation problem.First, as indicated by assumptions (33) (34), and (35), public investment in one of the regions will be justified during some phase of the planning period, even if it is less productive than the private investment in the same region. The reason is that the central government can directly control the interregional flow of public fundsoutside the market mechanism and can concentrate its public investment on the region with greater growth potential.Second, as seen by equation (41), the value of (T–t ^*), the length of the second phase of planning, is independent from the length of planning horizonT provided thatT>T–t ^*. Then, the relative significance of the second phase will be less and less asT becomes larger and larger. This is one of the characteristics which have been observed in the dynamic programming problems with linear form. Therefore, ifT is very large, the public investment should be almost persistently concentrated to the second region, as far as there is no change in the values of relevant parameters.Third, the resultant optimum solution is very sensitive to the relative sizes of such parameters ass _i, _i , _i (i=1, 2), and . Then, if there is some slight change in them by means of social overhead investment, for instance, which was analyzed earlier in this paper, we may observe a drastic change of the optimum solution. Such being the case, it may be possible for us to utilize some combination of those two kinds of public investment policy in order to attain theoptimum optimorum in the set of feasible growth paths.The author is a postdoctoral fellow with the University of Pennsylvania. The present paper is a product of his research on the basic theory of regional growth which has been supported by a grant from the Ford Foundation. This support is gratefully acknowledged. He is indebted to Professors W. Isard, B. H. Stevens, and J. Kissin for their valuable comments on the earlier draft of this paper. Of course, the author alone is responsible for any remaining errors.     

Absolute Configuration of β- and α-Asymmetric Carbons within β-O-4-Structures in Hardwood Lignin

In this study, we investigated the proportion of erythro- and threo-forms of β-O-4-ether structures and their enantiomeric compositions in hardwood lignin by applying the ozonation method to birch wood meal. Optical activity was not substantially observed in either the erythronic or threonic acids obtained as the ozonation products of β-O-4-structures in birch wood meal. The proportions of the four stereoisomeric forms {(αS,βR)-erythro, (αR,βR)-threo, (αS,βS)-threo, and (αR,βS)-erythro forms} were estimated to be 37-38%, 13-14%, 12-13%, and 36-37% based on the yields of erythronic and threonic acids, and on their optical activities. The proportions suggest that the entire components of β-O-4-ether structures in birch wood lignin have R- and S-configurations at the β-carbon in approximately the same quantities {(βR)-β-O-4-structure: (βS)-β-O-4-structure = 50–52:48–50}; i.e., that the β-ether structures are essentially racemic. This estimation implies that, during lignin biosynthesis, an equal number of enantiomeric forms of β-O-4-bonded quinone methides were formed by radical coupling reactions.     

Temperature measurements near a heating surface at high heat fluxes in subcooled pool boiling

In previous papers (Int J Heat Mass Transfer, 2008;50:3481–3489, 2009;52: 814–821), the authors conducted measurements of liquid–vapor structures in the vicinity of a heating surface for subcooled pool boiling on an upward‐facing copper surface by using a conducting probe method. We reported that the macrolayer dryout model is the most appropriate model of the CHF and that the reason why the CHF increases with increasing subcooling is most likely that a thick macrolayer is able to form beneath large vapor masses and the lowest heat flux of the vapor mass region shifts towards the higher heat flux. To develop a mechanistic model of the CHF for subcooled boiling, therefore, it is necessary to elucidate the effects of local subcooling on boiling behaviors in the vicinity of a heating surface. This paper measured local temperatures close to a heating surface using a micro‐thermocouple at high heat fluxes for water boiling on an upward‐facing surface in the 0 to 40 K range of subcooling. A value for the effective subcooling, defined as the local subcooling during the period while vapor masses are being formed was estimated from the detected bottom peaks of the temperature fluctuations. It was established that the effective subcooling adjacent to the surface remains at considerably lower values than the bulk liquid subcooling. This suggests that, from nucleation to coalescence, the subcooling of a bulk liquid has a smaller effect on the behavior of primary bubbles than the extent of the subcooling would appear to suggest. An empirical correlation of the effective subcooling is proposed to provide a step towards quantitative modeling of the CHF for subcooled boiling. © 2009 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20277     

The effect of molybdate anion on the ion-selectivity of hydrous ferric oxide films in chloride solutions

The ion-selective property of hydrous ferric oxide precipitate films has been investigated by measuring membrane potentials which arise across precipitate membranes of hydrous ferric oxide with and without adsorbed MoO₄^2? ions and of ferric molybdate in solutions of NaCl, KCl, MgCl₂, CaCl₂, BaCl₂, AlCl₃, and FeCl₃. The hydrous ferric oxide membrane was only permeable to Cl^? ions in chloride solutions, whereas the membrane with adsorbed MoO₄^2? ions was permeable to cations in NaCl and KCl solutions, and to both Cl^? and cations in the presence of multivalent cations. The ferric molybdate membrane was permeable to Cl^? and cations in NaCl and KCl solutions, and only to Cl^? ions in the presence of multivalent cations. It is suggested that in chloride solutions, the corrosion of iron covered with a precipitate film of hydrous ferric oxide is accelerated by enrichment of Cl^? ions under the film, which may decrease the local pH and introduce a positive diffusion potential in the film. The adsorption of MoO₄^2? ions on the oxide changes the ion-selectivity of the precipitate film from the anion-selective to the cation-selective in solutions of NaCl and KCl. This cation-selectivity of the film may inhibit the corrosion of iron, because of H⁺ ions diffusing out of the film. The inhibitive effect of MoO₄^2? ions would be reduced in the presence of multivalent cations.     

Differences in muscle and fat accretion in Japanese Black and European cattle

The development of different muscles and adipose tissues during growth was investigated in commercial Japanese Black (JB) cattle and compared with breeds of the largest variation to be found in Europe. Animals, reared under typical conditions for Japanese and European beef production systems, gained similar body weights but different carcass composition at 24 months of age. The carcass of JB contained more adipose tissue and the least proportion of muscle. The longissimus muscle of JB developed extraordinary amounts of 23.3% intramuscular fat (IMF) at 24 months of age, compared from 0.6% to 4.7% in European breeds. The relationships between IMF content in the longissimus muscle and different adipose tissue weights indicate that a large amount of “waste fat” is accreted with every percent of IMF. However in JB, the good ability of IMF deposition is associated with relatively least development of “waste fat”, as a result of unique breed characteristics combined with special feeding system.     

Comparison of coal hydroliquefaction catalysed by ZnCl2-MCln (CuCl,CrCl3 and MoCl5) and ZnCl2 melts

Hydrogenation of four bituminous coals impregnated with 5 wt% of either mixtures of ZnCl₂-MCl_n (CuCl, CrCl₃ and MoCl₅) systems or ZnCl₂ was carried out using a batch autoclave system at 400° for 3 h at 9.8 MPa of initial hydrogen pressure. The ZnCl₂-MoCl₅ system showed the highest yield of the hexane-soluble (HS) fraction compared with the other systems irrespective of the coal used. The difference between the yields of HS fractions using the ZnCl₂-MoCl₅ and other systems was most marked for coals of fairly low volatile matter content, though the conversion was relatively low (47–66%), whilst for coals of high volatile matter content HS yields with the binary melt systems were high (86–91% conversion). Elemental analyses of the HS fractions indicated that the ZnCl₂-MoCl₅ system is most favourable in decreasing the average molecular weight and the heteroatom content of HS, this characteristic trend being confirmed also with five HS fractions separated by Chromatographic techniques. Both elemental analyses and molecular weights of asphaltene (benzene-soluble materials, BS) indicated that the ZnCl₂-MoCl₅ system is also most effective in cracking coal structure.     

Inter- and intra-molecular ionic interactions of polyampholyte: Carboxymethyl-2-diethylaminoethylcellulose

Carboxymethyl-2-diethylaminoethylcellulose (CM-DEAE cellulose) was prepared by etherification of carboxymethylcellulose with diethylaminoethyl chloride in a NaOH solution. The behaviour of CM-DEAE cellulose in aqueous solution was studied by viscosity and GPC measurements. The degree of substitution (DS) and existing states of DEAE substituents were examined by the use of proton NMR, and those of the CM substituents were observed with FT-IR. The results reveal that the reduced viscosity and apparent molecular size of CM-DEAE cellulose vary with the concentration of sodium chloride and changes in pH and DS. These phenomena can be explained in terms of inter- and intra-molecular ionic interactions.     

Production of prostaglandins E1 and E2 by adult human red blood cells

We showed that human adult red blood cells (RBCs) produce prostaglandin E1 (PGE1) and E2 (PGE2). RBCs that were mechanically stressed in the presence of extracellular Ca2+ by being injected rapidly through a fine needle produced PGE1 and PGE2 within 30 min after this mechanical stress. The amounts of PGE1 and PGE2 produced by 1 x 10(9) mechanically stressed RBCs were approximately 50 pg and 100 pg, respectively, which were determined in the cytosolic fraction from sonicated RBCs using a competitive enzyme immunoassay method. A Western blot analysis using anti-cyclooxygenase-2 antibody revealed a band at the 70-kDa position in the samples from RBCs producing PGE1 and PGE2. Treatment with 10 micrograms/mL indomethacin completely inhibited the productions of PGE1 and PGE2. The present results may indicate a new role of RBCs in microcirculation.