Microwave hybrid fast sintering of red clay ceramics

This work aimed to examine the performance of the hybrid sintering of clay ceramic in a microwave furnace, compared to the sintering process in a conventional furnace. The raw materials were subjected to X-ray fluorescence, loss on ignition (LOI), X-ray diffraction, particle size distribution, real specific mass, and thermogravimetric analyses. The red clay ceramic mass was prepared, extruded, pre-sintered in a conventional furnace at 600°C/60 min, and sintered at temperatures between 700 °C and 1100 °C. The sintering conventional (resistive oven) was carried out for 60 min with a heating rate of 10°C/min. In the microwave furnace, the sintering times were 5, 10, and 15 min, with a heating rate of 50°C/min, with a sintering chamber coated with silicon carbide (susceptor). The sintered specimens were characterized according to linear shrinkage, water absorption, apparent porosity, apparent specific mass, X-ray diffraction, Raman spectroscopy analysis, spectroscopy analysis in the ultraviolet and visible regions, microhardness, and scanning electron microscopy. The results showed that microwave sintering promoted an increase in the microhardness and apparent specific mass, and reduction in water absorption and apparent porosity values, due to greater densification in the microstructure. The best results occurred for specimens sintered at 1100°C.     

Antioxidant and antibacterial activities of a starch film with bioextracts microencapsulated from cactus fruits (Opuntia oligacantha)

Food Science and Biotechnology - The use of unconventional sources is very relevant in the food area. In the present study the development of active films with the addition of bioextract (BE) or...     

New cardo silylated poly(azomethine)s containing 9,9′‐diphenylfluorene units as materials with Brønsted acid‐dependent fluorescence

Aromatic poly(azomethine)s have been studied due to their attractive properties such as high thermal stability, semiconducting behavior and the ability to coordinate species with their imine units (C?N). In this paper, the synthesis and characterization of two novel silylated poly(azomethine)s containing cardo units are reported. These materials were highly soluble in organic solvents such as chloroform and m‐cresol and were thermally stable, and PAzMC1 exhibited a high glass transition temperature value (287 °C), while that for PAzMC2 was not observed. UV–visible spectrophotometry revealed absorption bands related to the aromatic backbone of both PAzMCs, 300–285 nm in tetrahydrofuran and 310–301 nm in dimethylsulfoxide, and bands attributed to the conjugated imine unit at around 350 nm. In order to investigate the phenomenon of the emission of fluorescence promoted by dopant agents with regard to potential optoelectronic applications, the materials were doped with H₂SO₄ and their optical and electrochemical properties investigated. Thus, the absorption band of the imine group was suppressed due to the nitrogen atoms being protonated. Fluorescence spectroscopy analysis developed in dilute solutions of polymers showed no emission from the undoped polymers, whereas the acid‐doped species emitted fluorescence in the UV and violet regions (322 nm). Cyclic voltammetry measurements were carried out and HOMO–LUMO energies were estimated. This study provides a starting point for the development of new poly(azomethine)s with doping‐dependent emission. © 2019 Society of Chemical Industry     

Combination of freeze drying and molecular inclusion techniques improves the bioaccessibility of microencapsulated anthocyanins from black rice (Oryza sativa L.) and lavender (Lavandula angustifolia L.) essential oils in a model food system

Black rice and lavender are promising sources of bioactives, in terms of anthocyanins and essential oils. Their bioaccessibility were improved by microencapsulation, followed by mixing in order to benefit both from colour and flavour, along with radical scavenging and biological properties. The mixed powder showed a satisfactory anthocyanins of 2.55 mg g⁻¹ DW, leading to a radical scavenging activity of 65.14 mmol g⁻¹ DW. The powder displayed an inhibitory effect against α-glucosidase (~49%) and α-amylase (39%), respectively, with a controlled release in intestinal environment. To further examine the functional properties, the powder was added to a food model system. During storage, a release in anthocyanins and flavonoids were found, leading to an increase in radical scavenging activity. The sensorial analysis showed that supplemented biscuits were appreciated for colour and lavender aroma. The obtained results were promising in tailoring the health benefits of secondary metabolites, underutilised in human’s nutrition due to their low stability and bioavailability.     

The effect of microstructure on hydrogen permeability of high strength steels

Hydrogen diffusivity and trapping have been studied in two advanced high strength steel grades and model samples using electrochemical permeation test. Microstructures of CP1000 and DP1000 steels consist of ferrite, martensite and a small fraction of retained austenite. In addition, bainite is present in CP1000. Model phases with predominance of a particular phase have been prepared by specific heat treatment. DP1000 has shown the lowest diffusivity among all materials, while ferritic model sample has shown the highest. Differences in hydrogen diffusion coefficient values are linked to trapping microstructural characteristics and grain size.