Effect of polyethyleneimine-fatty acid complex type dispersant structure on the overall processing chain of Si3N4 ceramics using multicomponent non-aqueous slurries

The effect of fatty acid structure of polyethyleneimine (PEI)-fatty acid complex, which was designed as a polymer dispersant for multi-component non-aqueous slurries, on the overall processing chain of Si₃N₄ ceramics involving slurry stabilization, spray drying, compaction, and liquid sintering was investigated using PEI-oleic acid (PEI-OA) and PEI-isostearic (PEI-ISA) complexes. Si₃N₄-Y₂O₃-Al₂O₃-AlN-TiO₂/toluene slurries were selected as a real model for Si₃N₄-based multicomponent slurries. It was observed that both PEI-OA and PEI-ISA can stabilize Si₃N₄-Y₂O₃-Al₂O₃-AlN-TiO₂/toluene slurries; however, the PEI-ISA system tended to have slightly higher slurry viscosity, which was suspected to be due to the interactions between protruded PEI segments among short ISA chains. The spray-dried granules from PEI-ISA-stabilized slurry were observed to have filled structures with higher surface roughness whereas those prepared from PEI-OA-stabilized slurry were observed to have hollow-structured granules. The granules prepared from PEI-OA slurry had improved flow and compaction properties with higher relative density of green compacts compared with those prepared from PEI-ISA-stabilized slurry, whereas the relative density and microstructural homogeneity of S₃N₄ ceramics sintered at 1600?°C for 2?h were observed to be higher for the PEI-ISA system. It is suspected that PEI-OA effectively improved the dispersion stability of multicomponent slurries and flow/compaction properties of granules; however, the inhomogeneous microstructures of green compacts induced by the hollow-structured granules had an adverse effect on the sintering of Si₃N₄ ceramics.     

Fabrication of BSCF-based mixed oxide ionic-electronic conducting multi-layered membrane by sequential electrophoretic deposition process

The Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF)-based multi-layered oxygen separation membrane was fabricated by the sequential electrophoretic deposition (EPD) process. A thin porous/dense bi-layer of BSCF was formed on a thick porous support of BSCF. The porous support prepared by a sacrificial template method using BSCF powder mixed with wheat starch (30 wt%) as a pore-forming agent, followed by uniaxial pressing and low-temperature sintering, was directly used as an EPD electrode. A thin BSCF layer was first formed on the porous support, and then a thin BSCF + PMMA (polymethyl methacrylate) layer was sequentially formed on the thin BSCF layer using a bimodal suspension of BSCF and PMMA. A 30-μm thin porous/dense bi-layer of BSCF of which the total thickness was obtained by optimizing the processes of EPD and subsequent co-sintering. The oxygen separation performance of 3.7 ml (STP) min^?1 cm^?2 at 860 °C was achieved for the BSCF-based multi-layered oxygen separation membrane.     

Two Triterpene Synthases from Imperata cylindrica Catalyzing the Formation of a Pair of Diastereoisomers through Boat or Chair Cyclization

Imperata cylindrica is known to produce a pair of triterpenes, isoarborinol and fernenol, that exhibit identical planar structures but possess opposite stereochemistry at six of the nine chiral centers. These differences arise from a boat or a chair cyclization of the B-ring of the substrate. Herein, we report the characterization of three OSC genes from I. cylindrica. IcOSC1 and IcOSC5 were identified as isoarborinol and fernenol synthases, respectively, while IcOSC3 was characterized as a multifunctional enzyme that produces glutinol and friedelin as its major products. Mutational studies of isoarborinol and fernenol synthases revealed that the residues surrounding the DCTAE motif partially affected the conformation of the B-ring during cyclization. Additionally, the IcOSC1-W255H mutant produced the rare triterpene boehmerol. The introduced histidine residue presumably abstracted a proton from the intermediary carbocation at C18 during the 1,2-rearrangement. Expression analysis indicated that all OSC genes were highly expressed in stems.     

Improvement of the Nelder-Mead method using Direct Inversion in Iterative Subspace

Optimization and Engineering - The Nelder-Mead (NM) method is a popular derivative-free optimization algorithm owing to its fast convergence and robustness. However, it is known that the method...     

Bioconcentration potential of polydimethylsiloxane (PDMS) fluids by fish

The water solubilities (S), octanol/water partition coefficients (K_ow) and bioconcentration factors (BCF) of four polydimethylsiloxane (PDMS) fluids covering a wide range of molecular weight were measured. It is shown that a previously described correlation between S and K_ow for organic chemicals may be invalid for PDMS fluids; an alternative correlation is proposed. Some PDMS fluids tend to have a bioconcentration potential in silver carp.     

Electrical resistivity of Si3N4 ceramics with Yb2O3 additive

Si₃N₄ ceramics with excellent mechanical properties are used for heat dissipation substrates and so on. In order to improve their reliability and expand their application fields, it is desirable to understand and control the electrical properties of Si₃N₄ ceramics. In this study, the electrical resistivity of Si₃N₄ ceramics with Yb₂O₃ additive was investigated by applying various voltages at temperatures ranging from 25°C to 300°C. When Yb₂O₃ was added as a sintering aid to Si₃N₄ ceramics, a crystalline J-phase (Yb₄Si₂O₇N₂) was formed and their electrical resistivity was significantly lower than that of Y₂O₃ additive. The electrical resistivity of the Yb₂O₃-added ceramics decreased with an increase in temperature and applied voltage. Yb existed in multiple valence states, Yb²⁺ and Yb³⁺, in the Si₃N₄ ceramics and the decrease in the electrical resistivity can be attributed hopping conduction through the J-phase. The J-phase in the Si₃N₄ ceramics was observed to be continuous, and percolation analysis suggested that the J-phase formed an infinite cluster. Therefore, the decrease in the electrical resistivity of the Yb₂O₃-added Si₃N₄ ceramics was found mainly to result from the formation of an infinite cluster of J-phase, which exhibits hopping conduction.     

Surface Analysis of Cr2O3‐, CoO‐, and Al2O3‐Doped Iron–Phosphate Glasses at High Temperature

Surface structures of iron–phosphate glasses were examined using X‐ray photoelectron spectroscopy (XPS). Cr₂O₃, CoO, and Al₂O₃ were introduced to the glass by the replacement of a part of Fe₂O₃, and the simulated fission products are also added. The obtained glasses showed high chemical durabilities by MCC‐1 test. In situ high‐temperature and room‐temperature XPS measurements were conducted on the polished sample surfaces and also those after 1‐week chemical durability test. Unique trends were observed in XPS spectra on heating and after the chemical durability test, respectively. Nature of the glass surface of iron–phosphate glasses was explained from the point of view of surface energy, and the origin of high chemical durability and the effect of chromium ions were discussed based on the changes on surface composition and valence states of transition‐metal ions.     

Applicability of the generalized scaling law to a pile-inclined ground system subject to liquefaction-induced lateral spreading

The generalized scaling law is based on the concept of two-stage scaling and allows currently available centrifuge facilities to model a large-scale prototype expanding over the spatial dimension ranging from 30 m or larger subject to earthquake motions. This paper presents the results of investigation on the applicability of the generalized scaling law to the fully nonlinear regime of soil-structure system with the induced strain level of 10% in the order of magnitude. The centrifuge model tests performed in this study under the modeling of models scheme consist of a pile model embedded in a inclined ground subject to liquefaction-induced lateral spreading. Four different centrifugal accelerations ranging from 13g to 50g are used whereas the actual size of the physical model is kept constant with an overall scaling factor of 1/100. The models are exposed to tapered sinusoidal input accelerations of frequency 0.59 Hz and amplitude 3.0 m/s² in prototype scale, and the results are compared in terms of prototype by applying the generalized scaling law. As for the response of the ground during shaking, essentially identical accelerations and excess pore water pressures are recorded for all cases, while the lateral displacement shows a variation ranging from 5% to 9% in terms of shear strain due to a slight variation in experimental conditions (e.g., input peak acceleration, achieved density distribution). Practically the same responses are measured among the cases in the dissipation phase of excess pore water pressure. With regard to pile behavior, nearly identical responses for the lateral displacements and bending moments are obtained for all cases both during and after shaking. These results demonstrated that the generalized scaling law is applicable to the fully nonlinear regime of soil-structure system subject to the cumulative shear strain in the order of 10% due to cyclic mobility of sands during earthquakes.