5G核心网业务模型的智能化预测研究

摘 要：核心网业务模型的建立是5G网络容量规划和网络建设的基础，通过现有方法得到的理论业务模型是静态不可变的且与实际网络存在偏离。为了克服现有5G核心网业务模型与现网模型适配性较差以及规划设备无法满足用户实际业务需求的问题，提出了一种长短期记忆（long short-term memory，LSTM）网络与卷积LSTM （convolution LSTM，ConvLSTM）网络双通道融合的 5G 核心网业务模型预测方法。该方法基于人工智能（artificial intelligence，AI）技术以实现高质量的核心网业务模型的智能预测，形成数据反馈闭环，实现网络自优化调整，助力网络智能化建设。     

Synthesis of Hollow Three-Dimensional Channels LiNi_(0.5)Mn_(1.5)O_4 Microsphere by PEO Soft Template Assisted with Solvothermal Method

A appropriate size with three-dimension(3 D) channels for lithium diffusion plays an important role in constructing highperforming LiNi_(0.5)Mn_(1.5)O_4(LNMO) cathode materials, as it can not only reduce the transport path of lithium ions and electrons, but also reduce the side effects and withstand the structural strain in the process of repetitive Li~+ intercalation/deintercalation. In this work, an e fficient method for designing the hollow LNMO microsphere with 3 D channels structure by using polyethylene oxide(PEO) as soft template agent assisted solvothermal method is proposed. Experimental results indicate that PEO can make the reagents mingle evenly and nucleate slowly in the solvothermal process, thus obtaining a homogeneous distribution of carbonate precursors. In the final LNMO products, the hollow 3 D channels structure obtained by the decomposition of PEO and carbonate precursor in the calcination can provide abundant electroactive zones and electron/ion transport paths during the charge/discharge process, which benefits to improve the cycling performance and rate capability. The LNMO prepared by adding 1 g PEO possesses the most outstanding electrochemical performance, which presented an excellent discharge capacity of 143.1 mAh g~(-1) at 0.1 C and with a capacity retention of 92.2% after 100 cycles at 1 C. The superior performance attributed to the 3 D channels structure of hollow microspheres, which provide uninterrupted conductive systems and therefore achieve the stable transfer for electron/ion.     

Synthesis of nanopowders with low agglomeration by elaborating Φ values for producing Gd2O3-MgO nanocomposites with extremely fine grain sizes and high mid-infrared transparency

Refining ceramic microstructures to the nanometric range to minimize light scattering provides an interesting methodology for developing novel optical ceramic materials. In this work, we reported the fabrication and properties of a new nanocomposite optical ceramic of Gd₂O₃-MgO. The citric acid sol-gel combustion method was adopted to fabricate Gd₂O₃-MgO nanocomposites with fine-grain sizes, dense microstructures and homogeneous phase domains. Nanopowders with low agglomeration and improved sinterability can be obtained by elaborating Φ values. Further refining of the microstructure of the nanocomposites was achieved by elaborating the hot-pressing conditions. The sample sintered at 65 MPa and 1300 °C showed a quite high hardness value of 14.3 ± 0.2 GPa, a high transmittance of 80.3 %–84.7 % over the 3?6 μm wavelength range, due mainly to its extremely fine-grain size of Gd₂O₃ and MgO (93 and 78 nm, respectively) and high density.     

甘肃某石煤钒矿焙烧灰渣综合利用工艺研究

针对甘肃某石煤钒矿焙烧灰渣综合利用工艺进行研究。浸出过程中,将传统熟化-水浸浸出工艺与中和-酸浸浸出工艺进行对比,综合分析金属收得率及渣率,优选中和-酸浸双级浸出工艺。回收流程经中和酸浸、还原预处理、铝钒共沉、钒液富集等工序逐级分离回收铝、铁、钒等有价金属,并制备工业应用产品高分子比冰晶石、氧化铁红工业颜料并分析产品纯度。此外,对整个工艺流程的产生的废水、废渣进行综合治理。最后,投产经济效益进行了评估分析,为投资建设石煤钒矿焙烧尾渣综合利用项目提供可靠的决策依据。     

规整有机分子自聚集体对铜的高效缓蚀的研究

通过多步法合成了离子型含双苯并三氮唑环的目标分子，4，4'-{苯-1，3-二基二[(1E)-3-羰基丙-1-烯-1，3-二基]}二[2-(2H-苯并三唑-2-基)苯醇酸]二钾。在室温条件下，目标分子在3.5%（质量）NaCl/DMSO（二甲基亚枫）混合溶液 （体积比：40/60） 中能够发生分子自组装产生纳-微米级的自聚集体。通过傅里叶变换红外光谱 （FT-IR）、拉曼光谱和X射线光电子能谱 （XPS） 的表征，证实了所形成的目标分子自聚集体能够对铜表面产生强烈的化学吸附作用，在铜表面形成自组装膜。利用电化学方法测定了目标分子自聚集体吸附在铜表面形成自组装膜后，在3.5%（质量）NaCl溶液中的缓蚀性能。结果表明目标分子自聚集体在NaCl溶液中能高效地抑制铜腐蚀。     

Effect of an abrupt change in pulling rate on microstructures of directionally solidified Al2O3-Er3Al5O12 eutectic and off-eutectic composite ceramics

Directionally solidified microstructures of Al₂O₃-Er₃Al₅O₁₂ eutectic and off-eutectic in situ composite ceramics were explored under abrupt-change pulling rate conditions. Corresponding temperature distributions and interface locations were studied. In eutectic composition, fluctuation of eutectic spacing occurred when the pulling rate increased abruptly. A gradually increase or abrupt increase in eutectic spacing was observed when the pulling rate decreased abruptly. In hypoeutectic and hypereutectic compositions, formation of the primary phases were suppressed when the pulling rate increased abruptly from 10?µm/s to 100?µm/s, while primary phases precipitated when the pulling rate decreased abruptly from 100?µm/s to 10?µm/s. The interface altitude decreased after the pulling rate increased abruptly, but increased after the pulling rate decreased abruptly. The liquid composition restriction (around the eutectic composition) at the eutectic interface plays an important role in the suppression of the primary dendrite and coupled eutectic oxides can be obtained in off-eutectic compositions even under higher solidification rate conditions.     

利用量块和百分表提高钳工锉配工件测量的精度和效率

在钳工锉配中,测量贯穿整个加工过程,千分尺和游标卡尺等传统测量方式往往不能满足加工要求。创新使用量块、百分表和正弦规进行测量,既提高了测量的效率和准确性,又保证工件的加工精度,缩短了加工工时,高质量地完成工件的加工。     

USB数据传输中CRC校验码的并行算法实现

文章介绍了用于USB总线数据传输的CRC校验的原理和算法，并且采用并行电路实现USB2．0中的CRC产生和CRC校验，与传统的串行电路实现相比，并行电路实现方法虽然在芯片面积上大于串行电路实现，但由于降低了时钟频率，电路更容易综合实现，并且大大降低了功耗，有利于低功耗电路设计。     

延迟焦化装置加热炉炉管在线烧焦技术的应用

介绍了加热炉炉管在线烧焦技术在扬子石油化工股份有限公司炼油厂新建1.6 Mt/a延迟焦化装置一炉三室加热炉上的应用情况:在线烧焦的工艺流程、操作过程、操作要点以及效果等.该项专有技术的成功实施,提高了加热炉的能力,有效地解决了因炉管结焦需整体停车处理所造成的损失,消除了制约加热炉长周期运行的瓶颈,取得了良好的经济效益和社会效益.     

交通平衡分配下的公路桥收费策略

假定一个城市被一条河流分为两部分（如我国的武汉，重庆等市），河上至少架设了两座公路桥梁，本文研究在交通平衡状态下，怎样制定车辆过桥梁的收费水平，使获得的总收入最大，乘客的总行驶时间最少，对多车种问题，研究了等价的数学模型和算法。还对一个含两座桥梁与三种车型的简单算例，进行了计算与分析。