Design of a Web Based Underwater Acoustic Communication Testbed and Simulation Platform

Wireless Personal Communications - Underwater Wireless Sensor Networks (UWSNs) are playing a vital role in exploring the unseen underwater (UW) natural resources. However, performance evaluation of...     

Political Optimizer Based Feedforward Neural Network for Classification and Function Approximation

Neural Processing Letters - Political optimizer (PO) is a recently proposed human-behavior inspired meta-heuristic, which has shown tremendous performance on complex multimodal functions as well as...     

Recent advances in isotropic conductive adhesives for electronics packaging applications

Isotropic conductive adhesives (ICAs) have recently received a lot of focus and attention from the researchers in electronics industry as a potential substitute to lead-bearing solders. Numerous studies have shown that ICAs possess many advantages over conventional soldering such as environmental friendliness, finer pitch printing, lower temperature processing and more flexible and simpler processing. However, complete replacement of soldering by ICAs is yet not possible owing to several limitations of ICAs which are mainly related to reliability aspects like limited impact resistance, unstable contact resistance, low adhesion and conductivity etc. Continued efforts for last 15 years have resulted in development of ICAs with improved properties. This review article is aimed at providing a better understanding of ICAs, their principles, performance and significant research and development work addressing the technological utility of ICAs.     

Efficient dissemination of personalized information using content-based multicast

There has been a surge of interest in the delivery of personalized information to users (e.g., personalized stocks or travel information), particularly as mobile users with limited terminal device capabilities increasingly desire updated and targeted information in real time. When the number of information recipients is large and there is sufficient commonality in their interests, as is often the case, IP multicast is an efficient way of delivering the information. However, IP multicast services do not consider the structure and semantics of the information in the multicast process. We propose the use of Content-Based Multicast (CBM) where extra content filtering is performed at the interior nodes of the IP multicast tree; this will reduce network bandwidth usage and delivery delay, as well as the computation required at the sources and sinks. We evaluate the situations in which CBM is advantageous. The benefits of CBM depend critically upon how well filters are placed at interior nodes of the IP multicast tree and the costs depend upon those introduced by filters themselves. Further, we consider the benefits of allowing the filters to be mobile so as to respond to user mobility or changes in user interests and the corresponding costs of filter mobility. The criterion that we consider is the total network bandwidth utilization. For this criterion, we develop an optimal filter placement algorithm, as well as a heuristic that executes faster than the optimal algorithm. We evaluate the algorithms by means of simulation experiments. Our results indicate that filters can be effective in substantially reducing bandwidth. We also find filter mobility is worthwhile if there is marked large-scale user mobility. We conclude with suggestions for further work.     

Preparation of ion‐exchange membranes by hydrolysis of radiation‐grafted polyethylene‐g‐polyacrylamide membranes

Polyethylene‐g‐polyacrylamide membranes were prepared by graft polymerization of acrylamide onto polyethylene films using a preirradiation method. The ion‐exchange membranes were obtained by the hydrolysis of grafted films so as to transform amide groups into carboxyl groups. The fraction of amide groups transformed into carboxyl groups was limited to ～0.5. The characterization and thermal behavior of membranes with different degrees of grafting were evaluated by FTIR, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) measurements. The heat of fusion and the crystallinity of polyethylene decreased considerably in the hydrolyzed membranes depending on the degree of grafting. It was found that the grafting of acrylamide led to the reduction in crystallinity due to disruption of the crystallites (crystal defects) and dilution of the inherent crystallinity (dilution effect). The contribution of the hydrolysis step to the crystallinity decrease was negligible. The thermal stability of the membranes as obtained from TGA showed considerable enhancement after hydrolysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 149–154, 2003     

Surface designing of polypropylene by critical monitoring of the grafting conditions

The grafting of acrylic acid onto electron beam‐irradiated polypropylene was carried out using preirradiation method. The stability of peroxy radicals was investigated by electron spin resonance. It was found that the decay of peroxy radicals is much faster at 70°C than at 40°C and ambient temperature. The grafting has been observed to be strongly dependent on the monomer dilution in the reaction medium. The grafting was ascertained by attenuated total reflectance (ATR). The distribution of grafts across the samples was monitored by infrared microscopy. It was found that the graft management is considerably influenced by composition of the grafting medium. The grafting involving pure monomer leads to the surface enrichment with the polyacrylic acid chains. The samples grafted in pure monomer led to much lower contact angles as compared to the diluted monomer solution. The swelling of the grafted samples also showed a trend that was governed by the graft management. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 546–553, 2006     

Development of antimicrobial polypropylene sutures by graft copolymerization. II. Evaluation of physical properties,drug release,and antimicrobial activity

Polypropylene (PP) sutures are prepared by the simultaneous radiation grafting of 1‐vinylimidazole (VIm) onto PP monofilament sutures. The tenacity slightly decreases whereas the elongation increases with the increase in the degree of grafting. Thermogravimetric analysis shows that the stability of the sutures is enhanced by the grafting process. The grafted sutures have reasonably good water uptake. They are subsequently immobilized with an antimicrobial drug, ciprofloxacin. The modified suture releases the drug over a period of 4–5 days. The antimicrobial activity of the modified suture is determined against Esherichia coli by the zone of inhibition technique. A clear zone of inhibition is observed around the drug‐containing suture. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3534–3538, 2007     

KHATT: An open Arabic offline handwritten text database

A comprehensive Arabic handwritten text database is an essential resource for Arabic handwritten text recognition research. This is especially true due to the lack of such database for Arabic handwritten text. In this paper, we report our comprehensive Arabic offline Handwritten Text database (KHATT) consisting of 1000 handwritten forms written by 1000 distinct writers from different countries. The forms were scanned at 200, 300, and 600 dpi resolutions. The database contains 2000 randomly selected paragraphs from 46 sources, 2000 minimal text paragraph covering all the shapes of Arabic characters, and optionally written paragraphs on open subjects. The 2000 random text paragraphs consist of 9327 lines. The database forms were randomly divided into 70%, 15%, and 15% sets for training, testing, and verification, respectively. This enables researchers to use the database and compare their results. A formal verification procedure is implemented to align the handwritten text with its ground truth at the form, paragraph and line levels. The verified ground truth database contains meta-data describing the written text at the page, paragraph, and line levels in text and XML formats. Tools to extract paragraphs from pages and segment paragraphs into lines are developed. In addition we are presenting our experimental results on the database using two classifiers, viz. Hidden Markov Models (HMM) and our novel syntactic classifier.     

Mechanical,Thermal and Electrical Resisitivity Properties of Thermoplastic Composites Filled with Carbon Fibers and Carbon Particles

Composites consisting of carbon fibers (CF) and carbon particles (CP) in polypropylene (PP) matrix were melt-compounded. Composites were analyzed for their mechanical, electrical and thermal properties. Results indicate that the addition of these fillers improved the mechanical properties of the composites. Thermal conductivity was enhanced as the concentration of fillers was increased. Carbon fibers render the composites electrically conductive so we observed a percolation threshold near 10 wt.% of CF for PP/CF (PP and CF composite) and near 25 wt.% of CP for PP/CP (PP and carbon particle composite). All the results indicated that carbon fibers are more effective in improving the properties as compare to the carbon particles.