Influence of Different Additives on the Interaction of Quinolone Antibiotic Drug with Surfactant: Conductivity and Cloud Point Measurement Study

Conductometric and cloud point (CP) measurement studies have been performed to investigate the interaction of tetradecyltrimethylammonium bromide (TTAB) and Triton® X-100 (TX-100) with ciprofloxacin hydrochloride (CFH) in different solvents over the temperature range of 295.15–315.15 K. CFH is used for the treatment of various bacterial infections. The observed critical micelle concentration (CMC) values of TTAB were found to be reduced in the presence of electrolytes (Na₂SO₄/Na₃PO₄), and this reduction proceeds with the elevation of salt concentration. The order of the CMC of TTAB follows the trend: > >. The observed CMC values of TTAB were found to increase with increasing temperature and decrease with increasing concentration of CFH in aqueous medium. The values of Gibbs free energy of micellization () for the TTAB/TTAB + CFH mixture were found to be negative, implying spontaneous micellization. The estimated CP of TX-100 decreases with increasing concentration of TX-100 in aqueous medium. The CP values first decrease with increasing concentration of CFH and then increase at higher concentration of CFH almost in all cases investigated. The values of free energy of clouding were found to be positive in all cases studied implying that phase separation of TX-100 was nonspontaneous. The other thermodynamic parameters associated with the micellization of TTAB and the phase separation of TX-100 were estimated and explained.     

Case report: possible Lyme endocarditis

A 56-year-old male presented with clinical and serological data suggestive of Lyme disease. The patient was found to have an aortic valvular vegetation by transesophageal echocardiography. This report represents the first case of Lyme disease with possible valvular involvement.     

Application of model predictive control strategy based on fuzzy identification to an SP-100 space reactor

In this work, a model predictive control method combined with fuzzy identification, is applied to the design of the thermoelectric (TE) power control in the SP-100 space reactor. The future TE power is predicted by using the fuzzy model identified by a subtractive clustering method of a fast and robust algorithm. The objectives of the proposed fuzzy model predictive controller are to minimize both the difference between the predicted TE power and the desired power, and the variation of control drum angle that adjusts the control reactivity. Also, the objectives are subject to maximum and minimum control drum angle and maximum drum angle variation speed. The genetic algorithm that is effective in accomplishing multiple objectives is used to optimize the fuzzy model predictive controller. A lumped parameter simulation model of the SP-100 nuclear space reactor is used to verify the proposed controller. The results of numerical simulations to check the performance of the proposed controller show that the TE generator power level controlled by the proposed controller could track the target power level effectively, satisfying all control constraints.     

Structural integrity assessment of the containment structure of a pressurised heavy water nuclear reactor using impact echo technique

The impact echo technique is based on the use of transient stress waves for non-destructive detection of flaws in concrete structures. Impact-echo testing has been carried out for assessment of the structural integrity of the ring beam of a pressurised heavy water nuclear reactor. In order to develop the test procedure for carrying out impact echo testing, mock up calibration blocks were made. The detectability of the impact echo system has also been established in terms of the depth and the lateral dimension of the detectable flaw for the ring beam under consideration. Based on the optimised test parameters identified with the help of the studies carried out on the mock up blocks, impact echo testing was carried out on the ring beam of the reactor containment structure, for assessing its structural integrity.     

Effect of binder-phase modification and Cr3C2 addition on properties of WC-IOC0 cemented carbide

For production of fine-grained and corrosion-resistant tungsten carbide (WC) based cemented carbides, addition of chromium carbide (Cr₃3C₂) in small amounts is standard practice. No systematic study, however, has been made of the effects of large additions (maximum 6 wt % ) of Cr₃C₂ as a substitute for tungsten carbide. This study focuses on the effect of hard-phase substitution by C₃C₂ in WC-1OCo cemented carbide. An attempt is also made to modify the binder metal cobalt by partial or complete substitution of nickel. Specimens were prepared using the standard liquid-phase sintering process and were tested for sintered porosity, mechanical properties, corrosion resistance, and microstructural parameters. Results confirm the findings of earlier workers regarding grain refinement and improvement of mechanical properties upon the addition of small amounts (<2 wt%) of Cr₃C₂. Modification of the binder phase improves indentation fracture toughness and corrosion resistance. Addition of Cr₃C₂ independent of the binder type improves corrosion resistance.     

Chemical-bath deposition of band-gap-tailored CdxPb1−xS films

An attempt was made to modify the band gap of CdS ( 2.4 eV) by preparing a mixed lattice with a low-band-gap material, PbS (0.3 eV), giving a new set of materials, Cd _x Pb_1–x S. Band gaps as low as 1.9 eV were achieved with increasing x. The preparation of Cd _x Pb_1–x S was carried out by chemical-bath deposition. Structural characterization studies using X-ray diffraction (XRD), energy dispersion analysis by X-rays (EDAX), and optical microscopy were performed. The optical-absorption studies used to find the band gap are also described.     

Assessment of oxygen in silicon carbide fibres

Five different types of SiC fibre produced by chemical vapour deposition were analysed using Auger electron spectroscopy (AES), scanning electron microscopy (SEM) and X-ray (WDX) analysis. Fibres studied include SCS0, SCS6, Sigma SM1240 and two types of SiC fibres denoted SAM1 and SAM2, produced in the Commonwealth of Independent States (Ukraine, former USSR). Fibres were fracturedin situ in the Auger spectrometer. For each fibre, the oxygen, carbon and silicon yields were measured and qualitative assessment of oxygen was performed. Results suggest that the SCS0 fibre contains less oxygen than other SiC fibres. It was revealed that the SAM1 fibre (120 m diameter) has a duplex SiC and carbon coating deposited over a 20 m tungsten core prior to the main SiC deposition, to decouple mechanically the tungsten core from the main SiC deposition.     

Software fault prediction using Nonlinear Autoregressive with eXogenous Inputs (NARX) network

This paper explores a new approach for predicting software faults by means of NARX neural network. Also, a careful analysis has been carried out to determine the applicability of NARX network in software reliability. The validation of the proposed approach has been performed using two real software failure data sets. Comparison has been made with some existing parametric software reliability models as well as some neural network (Elman net and TDNN) based SRGM. The results computed shows that the proposed approach outperformed the other existing parametric and neural network based software reliability models with a reasonably good predictive accuracy.     

Total radiation dose at geostationary orbit

Active semiconductor components in satellites are sensitive to accumulated ionization radiation dose. Radiation dose and shielding estimations for electronic components are usually carried out using NASA models of space radiation particle flux. Accurate measurement of accumulated dose during the life of a satellite is essential for optimizing radiation shielding design for electronic components. Dosimeters were designed using radiation sensitive field-effect transistors (RADFETs) and accumulated dose at geostationary orbit was measured. Radiation dose as measured by these dosimeters with spherical aluminum shields are presented and compared with NASA model doses.