Comparative evaluation of extraction of tetra- and hexa-valent neptunium ions by CMPO in a room temperature ionic liquid

ABSTRACT

Solvent extraction studies were performed to understand the extraction behavior of Np⁴⁺ and NpO₂ ²⁺ from acidic feeds with CMPO (octyl (phenyl)-N,N-diisobutyl carbamoyl methyl phosphine oxide) dissolved in 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide, a water immiscible ionic liquid. Slope analyses on the distribution data revealed the extraction of ML₂ type species, where M = Np⁴⁺ or NpO₂ ²⁺, and L = CMPO. Studies were also carried out with Pu⁴⁺ and UO₂ ²⁺ under identical conditions. The nature of the extracted species was found to vary with the nature of the ionic species.     

Classification of DoS Attacks in Smart Underwater Wireless Sensor Network

As per the most recent literature, Orthogonal Frequency Division Multiplexing (OFDM), a multi access technique, is considered most suitable for the 3G, 4G and 5G techniques in high speed wireless communication. What made OFDM most popular is its ability to deliver high bandwidth efficiency and superior data rate. Besides it, high value of peak to average power ratio (PAPR) and Inter Carrier Interference (ICI) are the challenges to tackle down via appropriate mitigation scheme. As a research contribution in the present work, an improved self-cancellation (SC) technique is designed and simulated through Simulink to mitigate the effect of ICI. This novel proposed technique (Improved SC) is designed over discrete wavelet transform (DWT) based OFDM and compared with conventional SC scheme over different channel conditions i.e. AWGN and Rayleigh fading environments. It is found that proposed DWT-OFDM with Improved SC scheme outperforms conventional SC technique significantly, under both AWGN and Rayleigh channel conditions. Further, in order to justify the novelty in the research contribution, a Split-DWT based Simulink model for Improved SC scheme is investigated to analyse the BER performance. This Split-DWT based Simulink model presented here foretells the future research potential in wavelet hybridization of OFDM to side-line ICI effects more efficiently.

     

Lowpass and bandpass transadmittance filter using operational amplifier pole

A new topology simultaneously implementing lowpass (LP) and bandpass (BP) transadmittance filtering signals using a single operational amplifier (OA), one capacitor, and two resistors is presented. The input impedance is very high which is essential for cascading without employment of buffers. The circuit uses absolute minimum number of active and passive components. The filter employs pole-model of OA and as such has acquired suitability for extended frequency operation. The circuit permits separate adjustment of natural frequency (ω₀) and quality factor (Q) in an orthogonal manner. The circuit has low sensitivity figures unlike the reported single amplifier biquads. The PSPICE simulation results are included.     

A branch-and-bound algorithm to minimize total weighted completion time on identical parallel machines with job release dates

In this paper, we consider an identical parallel machine scheduling problem with release dates. The objective is to minimize the total weighted completion time. This problem is known to be strongly NP-hard. We propose some dominance properties and two lower bounds. We also present an efficient heuristic. A branch-and-bound algorithm, in which the heuristic, the lower bounds and the dominance properties are incorporated, is proposed and tested on a large set of randomly generated instances.     

An industrial portrait background removal solution based on knowledge infusion

Background removal of an identity (ID) picture consists in separating the foreground (face, body, hair and clothes) from the background of the image. It is a necessary groundwork for all modern identity documents that also has many benefits for improving ID security. State of the art image processing techniques encountered several segmentation issues and offer only partial solutions. It is due to the presence of erratic components like hairs, poor contrast, luminosity variation, shadow, color overlap between clothes and background. In this paper, a knowledge infused approach is proposed that hybridizes smart image processing tasks and prior knowledge. The research is based on a divide and conquer strategy aiming at simulating the sequential attention of human when performing a manual segmentation. Knowledge is infused by considering the spatial relation between anatomic elements of the ID image (face feature, forehead, body and hair) as well as their “signal properties”. The process consists in first determining a convex hull around the person’s body including all the foreground while keeping very close to the contour between the background and the foreground. Then, a body map generated from biometric analysis associated to an automatic grab cut process is applied to reach a finer segmentation. Finally, a heuristic-based post-processing step consisting in correcting potential hair and fine boundary issues leads to the final segmentation. Experimental results show that the newly proposed architecture achieves better performances than tested current state-of-the-art methodologies including active contours, generalist popular deep learning techniques, and also two other ones considered as the smartest for portrait segmentation. This new technology has been adopted by an international company as its industrial ID foreground solution.

     

Effects of Hall current and two temperatures in transversely isotropic magnetothermoelastic with and without energy dissipation due to ramp-type heat

The present article is concerned with the investigation of disturbances in a homogeneous transversely isotropic thermoelastic rotating medium with two temperatures, in the presence of the combined effects of Hall currents and magnetic field. The formulation is applied to the thermoelasticity theories developed by Green-Naghdi theories of type-II and type-III. Laplace and Fourier transform techniques are applied to solve the problem. The analytical expressions of displacements, stress components, temperature change, and current density components are obtained in the transformed domain. A numerical inversion technique has been applied to obtain the results in the physical domain. Numerical simulated results are depicted graphically to show the effect of Hall current and two temperatures on resulting quantities. Some special cases are also deduced from the present investigation.     

Abiotic stress of ZnO‐PEG,ZnO‐PVP,CuO‐PEG and CuO‐PVP nanoparticles enhance growth,sweetener compounds and antioxidant activities in shoots of Stevia rebaudiana Bertoni

Nanoparticles are known to play remarkable role as abiotic stress elicitors in plants. This study reports the comparative analysis of effects produced by capped [zinc oxide (ZnO)‐polyethylene glycol (PEG), ZnO‐polyvinyl pyrrolidone (PVP), copper oxide (CuO)‐PEG, CuO‐PVP] and uncapped (ZnO and CuO) nanoparticles on the medicinal plant, Stevia rebaudiana raised in vitro for the production of commercially important sweetener compounds. In context of shoot organogenesis, ZnO‐PEG, ZnO‐PVP, CuO‐PEG, CuO‐PVP were employed to the growth medium that resulted in increased growth parameters, and larger content of steviol glycosides as compared to the shoots raised in medium containing ZnO and CuO, revealed by high‐performance liquid chromatography. In the meanwhile, non‐enzymatic antioxidant activities including total phenolic content, total flavonoid content, total antioxidant capacity, total reducing power and 2,2‐diphenyl‐1‐picryl hydrazyl‐free radical scavenging activity were calculated and showed comparatively greater amounts in shoots grown in medium containing capped ZnO or CuO nanoparticles. Furthermore, the ZnO and its derivatives revealed to be more reactive at 1 mg/l of concentration. Whereas, the CuO and its derivatives produced greater response on Stevia at 10 mg/l concentration of nanoparticles. This study paves the way for more such studies encompassing capped and uncapped nanoparticles and their ultimate effect on in‐vitro grown plant tissues for the production of active metabolites on industrial scale.Inspec keywords: nanoparticles, chromatography, resins, polymers, zinc compounds, copper compounds, food technology, agricultureOther keywords: nanoparticles, sweetener compounds, antioxidant activities, Stevia rebaudiana Bertoni, abiotic stress elicitors, zinc oxide‐polyethylene glycol, zinc oxide‐polyvinyl pyrrolidone, copper oxide‐polyethylene glycol, medicinal plant, shoot organogenesis, steviol glycosides, high‐performance liquid chromatography, nonenzymatic antioxidant activities, total phenolic content, total flavonoid content, total antioxidant capacity, total reducing power, 2,2‐diphenyl‐1‐picryl hydrazylfree radical scavenging activity, derivatives, active metabolite production, copper oxide‐polyvinyl pyrrolidone     

Designing genetic regulatory networks using fuzzy Petri nets approach

In this paper, we have successfully presented a fuzzy Petri net (FPN) model to design the genetic regulatory network. Based on the FPN model, an efficient algorithm is proposed to automatically reason about imprecise and fuzzy information. By using the reasoning algorithm for the FPN, we present an alternative approach that is more promising than the fuzzy logic. The proposed FPN approach offers more flexible reasoning capability because it is able to obtain results with fuzzy intervals rather than point values. In this paper, a novel model with a new concept of hidden fuzzy transition (HFT) to design the genetic regulatory network is developed. We have built the FPN model and classified the input data in terms of time point and obtained the output data, so the system can be viewed as the two-input and one output system. This method eliminates possible false predictions from the classical fuzzy model thereby allowing a wider search space for inferring regulatory relationship. The experimental results show the proposed approach is feasible and acceptable to design the genetic regulatory network and investigate the dynamical behaviors of gene network.     

A virtual RV-M1 robot system

Exploring a virtual model under simulated environments is the best way to learn about a real system. This is particularly true in robotics where it is quite expensive to provide the system to each individual. The interdisciplinary area of robotics is being studied commonly in various fields like electrical, computer, mechanical engineering, nanotechnology, etc. A virtual robot system can help one fully understand the controls and working of a robot. The system may also be helpful to design the path and plan the trajectory of a robot in an industrial environment or other robotics application. Virtual model of RV-M1 robot has been developed in the MATLAB environment. The virtual system performs forward kinematics and inverse kinematics in addition to providing a simulation of the robot teachbox.