Substrate Analysis on the Design of Wide-Band Antenna for Sub-6 GHz 5G Communication

Wireless Personal Communications - A compact triple band antenna with stacked T-shaped strips inside a rectangular ring monopole has been proposed. This novel structure with a slot in the defected...     

Halogenation effect promoted low bandgap polymers based on asymmetric isoindigo unit with low energy loss

To optimize the energy levels of the structural framework of isoindigo polymers, a series of asymmetric isoindigo based low bandgap polymers with chlorine, fluorine and thiazole substituents was constructed and their optical, electrochemical and photovoltaic properties were comparatively evaluated for the impact of different substitutions. In comparison with the polymer based on 2,2'‐bithiophene and isoindigo unit (PTi) with non‐substituted bithiophene as the donor moiety, the highest occupied molecular orbital energy level for the newly synthesized polymers is significantly decreased, and in turn an improvement of the open‐circuit voltage (V_OC) is noted in the corresponding photovoltaic devices. More importantly, combined with a low bandgap of 1.32 eV, the energy losses (E_loss) could be reduced to 0.61 eV for polymer based on chlorinated 2,2'‐bithiophene and isoindigo unit (PCl). In addition, the halogen moieties are observed to be superior in device fabrication and give better values than the thiazole substituent. Both fluorinated and chlorinated polymer donors exhibited improved performance compared with the original polymer PTi. Consequently, this work not only presents the influence of different electron withdrawing substituents on the physicochemical and photovoltaic performance, but also backs the concept of how to reduce the energy loss via the heteroatom effect. © 2020 Society of Chemical Industry     

Extracellular Vesicles and Asthma—More Than Just a Co-Existence

Extracellular vesicles (EVs) are membranous structures, which are secreted by almost every cell type analyzed so far. In addition to their importance for cell-cell communication under physiological conditions, EVs are also released during pathogenesis and mechanistically contribute to this process. Here we summarize their functional relevance in asthma, one of the most common chronic non-communicable diseases. Asthma is a complex persistent inflammatory disorder of the airways characterized by reversible airflow obstruction and, from a long-term perspective, airway remodeling. Overall, mechanistic studies summarized here indicate the importance of different subtypes of EVs and their variable cargoes in the functioning of the pathways underlying asthma, and show some interesting potential for the development of future therapeutic interventions. Association studies in turn demonstrate a good diagnostic potential of EVs in asthma.     

Recent developments in catalyst synthesis using DBD plasma for reforming applications

The catalyst has a significant role in gas processing applications such as reforming technologies for H₂ and syngas production. The stable catalyst is requisite for any industrial catalysis application to make it commercially viable. Several methods are employed to synthesize the catalysts. However, there is still a challenge to achieve a controlled morphology and pure catalyst which majorly influences the catalytic activity in reforming applications. The conventional methods are expansive, and the removal of the impurities are major challenges. Nevertheless, it is not straightforward to achieve the desired structure and stability. Therefore, significant interest has been developed on the advanced techniques to take control of the physicochemical properties of the catalyst through non-thermal plasma (NTP) techniques. In this review, the systematic evolution of the catalyst synthesis using NTP technique is elucidated. The emerging DBD plasma to synthesized and effective surface treatment is reviewed. DBD plasma synthesized catalyst performance in reforming application for H₂ and syngas production is summarised. Furthermore, the status of DBD plasma for catalyst synthesis and proposed future avenues to design environmentally suitable and cost-effective synthesis techniques are discussed.     

Ternary adsorbent photocatalyst hybrid (APH) nanomaterials for improved abstraction of tetracycline from water

ABSTRACT

Current health situations have instigated increased frequency of taking antibiotics for cure of infections but this amplified use is posing threats to environment. This research is focused to remove Tetracycline (TC), an antibiotic from water, using an advanced nanohybrid that compact the properties of adsorbent and photocatalyst. Compared to conventional methods for remediation of TC, large surface area (452 m²g^?1) adsorbent photocatalyst hybrid (APH) g-C₃N₄/α-MoO₃/ZIF-67 (CMZ) have found much effective as 97% degradation of TC is observed in 110 min with 0.1 g of APH. Increasing g-C₃N₄ in the hybrids has improved percent degradation of TC molecules. CMZ-3 is found as a potential candidate for water treatment.     

Switchable Fluorescence of Doxorubicin for Label-Free Imaging of Bioorthogonal Drug Release

Monitoring the release and activation of prodrug formulations provides essential information about the outcome of a therapy. While the prodrug delivery can be confirmed by using different imaging techniques, confirming the release of active payload by using imaging is a challenge. Here, we have discovered that the switchable fluorescence of doxorubicin can validate drug release upon its uncaging reaction with a highly specific chemical partner. We have observed that the conjugation of doxorubicin with a trans-cyclooctene (TCO) diminishes its fluorescence at 595 nm. This quenched fluorescence of the doxorubicin prodrug is recovered upon its bond-cleaving reaction with tetrazine. Clinically assessed iron oxide nanoparticles were used to formulate a doxorubicin nanodrug. The release of doxorubicin from the nanodrug was studied under various experimental conditions. A fivefold increase in doxorubicin fluorescence is observed after complete release. The studies were carried out in vitro in MDA-MB-231 breast cancer cells. An increase in Dox signal was observed upon tetrazine administration. This switchable fluorescence mechanism of Dox could be employed for fundamental studies, that is, the reactivity of various tetrazine and TCO linker types under different experimental conditions. In addition, the system could be instrumental for translational research where the release and activation of doxorubicin prodrug payloads can be monitored by using optical imaging systems.     

Time-dependent hydromagnetic stagnation point flow of a Maxwell nanofluid with melting heat effect and amended Fourier and Fick's laws

An unsteady stagnation point flow of a Maxwell fluid over a unidirectional linearly stretching sheet is studied under the influence of a magnetic field. The parabolic energy equation, which is based on parabolic Fourier law is replaced with a hyperbolic energy equation incorporating the heat flux model of Cattaneo–Christov. The Buongiorno model is used to characterize the properties of nanofluids using thermophoresis and Brownian diffusion coefficients. The phenomenon of melting heat transfer and slip mechanism is also embodied in the present study. Coupled nonlinear differential equations have appeared when the specified similarity transformations are applied. The mathematical problem is tackled via the homotopy analysis method. The impact of important physical parameters on the velocity, concentration, and temperature are highlighted via graphs. To verify our present results, a comparison is given with a limiting case with an already published article. It is witnessed through the graphs that the higher unsteadiness parameter and melting heat coefficient both are responsible for the reduction in the velocity and temperature of the nanofluid. Also, the velocity slip parameter detracts the velocity profile and affiliated boundary layer thickness of the Maxwell nanofluid.     

Fabrication of Mn–ZnO photoanodes for photoelectrochemical water splitting applications

Journal of Materials Science: Materials in Electronics - A photoelectrochemical (PEC) water splitting ability of pure ZnO and manganese-incorporated ZnO thin films fabricated via a simple...