The role of microstructural evolution during spark plasma sintering on the soft magnetic and electronic properties of a CoFe–Al2O3 soft magnetic composite

Journal of Materials Science - For transformers and inductors to meet the world’s growing demand for electrical power, more efficient soft magnetic materials with high saturation magnetic...     

The ultrasound appearances of neonatal renal vein thrombosis

Renal vein thrombosis (RVT) is the most frequently occurring vascular condition in the new-born kidney. The predisposing factors include dehydration, sepsis, birth asphyxia, maternal diabetes, polycythaemia and the presence of an indwelling umbilical venous catheter. (RVT) may present clinically with a flank mass, haematuria, hypertension or renal failure. Many imaging modalities have been employed, but ultrasound is the technique most commonly used in the evaluation of neonates with suspected RVT. Thrombosis commences in the small renal veins and subsequently propagates via larger interlobar veins to the main renal vein and inferior vena cava (IVC). The ultrasound appearances depend upon the stage at which the examination is performed and extent of the thrombus. Initially, the interlobular and interlobar thrombus appears as highly echogenic streaks. These streaks commence in a peripheral, focal segment of the involved kidney and only persist for a few days. In the first week the affected kidney swells and becomes echogenic with prominent echopoor medullary pyramids. Later, the swelling increases and the kidney becomes heterogenous with loss of corticomedullary differentiation. Grey scale ultrasound readily demonstrates thrombus within the renal vein and IVC. Adrenal haemorrhage is a recognized association and may be identified ultrasonically. Colour Doppler scanning provides additional information. In the early stages of RVT, colour Doppler may demonstrate absent intrarenal and renal venous flow. Ultimately, the kidney may recover, show focal scarring or become atrophic. Thus, ultrasound provides an accessible and reliable tool in the assessment of suspected neonatal RVT.     

Widely tunable bottom-emitting vertical-cavity SOAs

We present bottom-emitting tunable vertical-cavity semiconductor optical amplifiers (VCSOAs) with an effective wavelength tuning range of >20 nm. These devices utilize a high reflectivity micromechanically tunable Bragg mirror as the back reflector. Compared with our first generation tunable VCSOAs, the bottom-emitting devices exhibit a two-fold increase in the effective tuning range as well as a five-fold reduction in the required tuning voltage.     

Modification of platinum surfaces by spontaneous deposition: Methanol oxidation electrocatalysis

The presence of a second metal on platinum surfaces affects the performance of methanol oxidation. However, most of the electrocatalytic reactions are studied by using electrochemically deposited platinum alloys, but in the case of spontaneous deposition the situation is not so clear since the surface distribution, stability and morphology are usually not well documented. The formation of surface decorated samples on mono- and poly-crystalline platinum is followed by electrochemical and spectroscopic techniques and analysis of their performance towards methanol adsorption and oxidation compared with that on pure platinum. Pt/Sn and Pt/Ru are of special interest because of their well-known performance in methanol fuel cells. Methanol oxidation on Pt(111)/Ru, Pt(111)/Sn and Pt(111) shows that ruthenium is the only one able to promote the reaction since the simultaneous dissolution of tin occurs and competes with the process of interest. The in situ infrared spectroscopy is used to compare methanol oxidation on Pt(111)/Ru and Pt(111) in acid media using p-polarized light. The formation of bridge bound carbon monoxide is inhibited in the presence of ruthenium ad-species, whereas on Pt(111) the three adsorption configurations are observed. Linear sweep polarization curves and Tafel slopes (calculated from steady state potentiostatic plots) for methanol oxidation are compared on polycrystalline surfaces modified by tin or ruthenium at different coverages. There is almost no change in the Tafel slopes due to the presence of the foreign metal except for Pt/Ru, where a 0.09 V decade⁻¹ slope was calculated below 0.55 V due to hydroxyl adsorbates on ruthenium islands. The anodic stripping of methanol residues on the three surfaces indicates a lower amount of carbon monoxide-type adsorbates on Pt/Ru, and the simultaneous tin dissolution process leading to residues oxidation on Pt/Sn electrodes.     

Analysis of immunoglobulin-synthesizing cells in human dental periapical lesions by in situ hybridization and immunohistochemistry

The iron status of 22 children and adolescents with Crohn's disease (mean age: 13 years) was evaluated. Eleven patients were suffering from active disease with inflammation, identified by at least one abnormal value for serum orosomucoid, C-reactive protein or sedimentation rate (group I). Eleven patients were in clinical remission and showed no biological evidence of inflammation (group II). Hemoglobin and red cell indices, erythrocyte protoporphyrin, serum iron, transferrin, serum ferritin and basic red cell ferritin were determined in all patients. The usual indicators of iron status, particularly serum ferritin, were affected by the inflammatory processes, but basic red cell ferritin appeared to be independent of inflammation. Basic red cell ferritin can therefore be considered to be a reliable indicator of iron status in children and adolescents with Crohn's disease.     

Standard reference materials for cements

The eight portland cements and two calcium aluminate cements in the Standard Reference Material (SRM) 1880 series are among the most popular SRMs in the catalog of the National Institute of Standards and Technology (NIST) Standard Reference Materials Program. Numerous laboratories rely on them for elemental analysis and qualification for ASTM C 114-00 Standard Test Methods for Chemical Analysis of Hydraulic Cement. NIST has collected new candidate materials from around the world and partnered with Construction Technology Laboratories (CTL) in their preparation and certification. This paper describes the procedures taken at NIST and CTL to prepare and test materials for certification including the homogeneity testing, the X-ray fluorescence methods and the statistical data analysis performed for value assignment.     

The lexical nature of syntactic ambiguity resolution.

Ambiguity resolution is a central problem in language comprehension. Lexical and syntactic ambiguities are standardly assumed to involve different types of knowledge representations and be resolved by different mechanisms. An alternative account is provided in which both types of ambiguity derive from aspects of lexical representation and are resolved by the same processing mechanisms. Reinterpreting syntactic ambiguity resolution as a form of lexical ambiguity resolution obviates the need for special parsing principles to account for syntactic interpretation preferences, reconciles a number of apparently conflicting results concerning the roles of lexical and contextual information in sentence processing, explains differences among ambiguities in terms of ease of resolution, and provides a more unified account of language comprehension than was previously available. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A 12-channel phased-array wavelength multiplexer with multimodeinterference couplers

A compact 12-channel phased-array wavelength-division multiplexer based on multimode interference (MMI) couplers and useful for application with multiwavelength lasers is proposed. A suitably-chosen 1×12 MMI nonuniform power splitter is used to suppress the sidelobes of the multiplexer spectral response. Simulated results for the multiplexer designed in an InP-InGaAsP rib waveguide system and with 1-nm channel spacing at a wavelength of 1550 nm are presented. The multiplexer has a length of 3.2 mm and an insertion loss of 1.7 dB