Application of a sensitive and specific LC‐MS/MS method for determination of eriodictyol‐8‐C‐β‐d‐glucopyranoside in rat plasma for a bioavailability study

This study is the first to detail the development and validation of a rapid, sensitive and specific LC‐ESI‐MS/MS method for the determination of eriodictyol‐8‐C‐β‐d ‐glucopyranoside (EG) in rat plasma. A simple protein precipitation method was used for plasma sample preparation. Chromatographic separation was successfully achieved on an Agilent Zorbax XDB C₁₈ column (2.1 × 50 mm, 3.5 µm) using a step gradient program with the mobile phase of 0.1% formic acid aqueous solution and acetonitrile with 0.1% formic acid. EG and the internal standard (IS) were detected using an electrospray negative ionization mass spectrometry in the multiple reaction monitoring mode. This method demonstrated good linearity and did not show any endogenous interference with the active compound and IS peaks. The lower limit of quantification of EG was 0.20 ng/mL in 50 μL rat plasma. The average recoveries of EG and IS from rat plasma were both above 80%. The inter‐day precisions (relative standard deviation) of EG determined over 5 days were all within 15%. The present method was successfully applied to a quantification and bioavailability study of EG in rats after intravenous and oral administration. The oral absolute bioavailability of EG in rats was estimated to be 7.71 ± 1.52%. Copyright © 2014 John Wiley & Sons, Ltd.     

A Facile Route to Backbone‐Tethered N‐Heterocyclic Carbene (NHC) Ligands via NHC to aNHC Rearrangement in NHC Silicon Halide Adducts

The reaction of 1,3‐diisopropylimidazolin‐2‐ylidene (iPr₂Im) with diphenyldichlorosilane (Ph₂SiCl₂) leads to the adduct (iPr₂Im)SiCl₂Ph₂ 1 . Prolonged heating of isolated 1 at 66 °C in THF affords the backbone‐tethered bis(imidazolium) salt [(^aHiPr₂Im)₂SiPh₂]²⁺ 2 Cl^? 2 (“^a” denotes “abnormal” coordination of the NHC), which can be synthesized in high yields in one step starting from two equivalents of iPr₂Im and Ph₂SiCl₂. Imidazolium salt 2 can be deprotonated in THF at room temperature using sodium hydride as a base and catalytic amounts of sodium tert‐butoxide to give the stable N‐heterocyclic dicarbene (^aiPr₂Im)₂SiPh₂ 3 , in which two NHCs are backbone‐tethered with a SiPh₂ group. This easy‐to‐synthesize dicarbene 3 can be used as a novel ligand type in transition metal chemistry for the preparation of dinuclear NHC complexes, as exemplified by the synthesis of the homodinuclear copper(I) complex [{^a(ClCu?iPr₂Im)}₂SiPh₂] 4 .     

不同有机碱对铕-2-羟基喹啉-4-羧酸配合物发光性能的影响

分别在有机碱三乙胺、三丙胺和三丁胺的作用下,使用2-羟基喹啉-4-羧酸(H2hqc)与EuCl3·6H2O反应制备了3种配合物Eu(Hhqc)3(TEL)、Eu(Hhqc)3(TPL)和Eu(Hhqc)3(TBL)。通过元素分析、热重分析、摩尔电导率、紫外光谱、荧光光谱、荧光寿命和量子产率等对配合物进行了表征。所有配合物均在580,592,613,654,702 nm附近产生5条谱带,为Eu3+的特征发射,归属为5D0→7FJ(J=0,1,2,3,4)能级间的跃迁,荧光寿命分别为2.22,3.29,3.31 ms,量子产率分别为0.011,0.019,0.028。随着有机胺碳链长度的增加,配合物的荧光强度依次增大,表明有机碱参与了配合物的分子组成。     

Biosensing by Tandem Reactions of Structure Switching,Nucleolytic Digestion,and DNA Amplification of a DNA Assembly

ϕ29 DNA polymerase (ϕ29DP) is able to carry out repetitive rounds of DNA synthesis using a circular DNA template by rolling circle amplification (RCA). It also has the ability to execute 3′–5′ digestion of single‐stranded but not double‐stranded DNA. A biosensor engineering strategy is presented that takes advantage of these two properties of ϕ29DP coupled with structure‐switching DNA aptamers. The design employs a DNA assembly made of a circular DNA template, a DNA aptamer, and a pre‐primer. The DNA assembly is unable to undergo RCA in the absence of cognate target owing to the formation of duplex structures. The presence of the target, however, triggers a structure‐switching event that causes nucleolytic conversion of the pre‐primer by ϕ29DP into a mature primer to facilitate RCA. This method relays target detection by the aptamer to the production of massive DNA amplicons, giving rise to dramatically enhanced detection sensitivity.     

Synthesis and characterization of copper(II) Schiff base complex supported on Fe3O4 magnetic nanoparticles: a recyclable catalyst for the one‐pot synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones

Fe₃O₄–Schiff base of Cu(II) is found to be a recyclable and heterogeneous catalyst for the rapid and efficient synthesis of various 2,3‐dihydroquinazolin‐4(1H)‐one derivatives from the two‐component condensation of 2‐aminobenzamide and an aldehyde. This reaction is simple, green and cost‐effective. Separation and recycling can also be easily done by magnetic decantation of the Fe₃O₄ nanoparticles with an external magnet. The prepared catalyst was characterized using thermogravimetry, Fourier transform infrared spectroscopy, vibrating sample magnetometry, inductively coupled plasma analysis, X‐ray diffraction and scanning electron microscopy. Copyright © 2015 John Wiley & Sons, Ltd.     

Reduced dimensionality (3,2)D NMR experiments and their automated analysis: implications to high‐throughput structural studies on proteins

Protein NMR spectroscopy has expanded dramatically over the last decade into a powerful tool for the study of their structure, dynamics, and interactions. The primary requirement for all such investigations is sequence‐specific resonance assignment. The demand now is to obtain this information as rapidly as possible and in all types of protein systems, stable/unstable, soluble/insoluble, small/big, structured/unstructured, and so on. In this context, we introduce here two reduced dimensionality experiments – (3,2)D‐hNCO canH and (3,2)D‐hN coCA nH – which enhance the previously described 2D NMR‐based assignment methods quite significantly. Both the experiments can be recorded in just about 2–3 h each and hence would be of immense value for high‐throughput structural proteomics and drug discovery research. The applicability of the method has been demonstrated using alpha‐helical bovine apo calbindin‐D9k P43M mutant (75 aa) protein. Automated assignment of this data using AUTOBA has been presented, which enhances the utility of these experiments. The backbone resonance assignments so derived are utilized to estimate secondary structures and the backbone fold using Web‐based algorithms. Taken together, we believe that the method and the protocol proposed here can be used for routine high‐throughput structural studies of proteins. Copyright © 2014 John Wiley & Sons, Ltd.     

Highly Efficient Copper(II) Ion Sorbents Obtained by Calcium Carbonate Mineralization on Functionalized Cross‐Linked Copolymers

A new type of Cu^II ion sorbents is presented. These are obtained by CaCO₃ mineralization from supersaturated solutions on gel‐like cross‐linked polymeric beads as insoluble templates. A divinylbenzene–ethylacrylate–acrylonitrile cross‐linked copolymer functionalized with weakly acidic, basic, or amphoteric functional groups has been used, as well as different initial inorganic concentrations and addition procedures for CaCO₃ crystal growth. The morphology of the new composites was investigated by SEM and compared to that of the unmodified beads, and the polymorph content was established by X‐ray diffraction. The beads, before and after CaCO₃ mineralization, were tested as sorbents for Cu^II ions. The newly formed patterns on the bead surface after Cu^II sorption were observed by SEM, and the elemental distribution on the composites and the chemical structure of crystals after interaction with Cu^II were investigated by EDAX elemental mapping and by FTIR‐ATR spectroscopy, respectively. The sorption capacity increased significantly after CaCO₃ crystals growth on the weak anionic bead surface (up to 1041.5 mg Cu^II/g sample) compared to that of unmodified beads (491.5 mg Cu^II/g sample).