Photonic integrated technology for multi-wavelength laser emission

We summarized the design, fabrication challenges and important technologies for multi-wavelength laser transmitting photonic integration. Technologies discussed include multi-wavelength laser arrays, monolithic integration and modularizing coupling and packaging. Fabrication technique requirements have significantly declined with the rise of reconstruction-equivalent-chirp and second nanoimprint mask technologies. The monolithic integration problem between active and passive waveguides can be overcome with Butt-joint and InP array waveguide grating technologies. The dynamic characteristics of multi-factors will be simultaneously measured with multi-port analyzing modules. The performance of photonic integration chips is significantly improved with the autoecious factors compensation packaging technique.     

Serum levels of perfluorinated compounds in the general population in Shenzhen, China

Perfluorinated compounds (PFCs) have been detected in many environmental matrices, biota, and nonoccupationally exposed populations in China recently. However, little is known about the distribution and levels of various PFCs in the general population living in areas where there is PFC exposure. In the present study, the levels and prevalence of ten target PFCs were determined in 227 serum samples from a population of nonoccupationally exposed individuals in Shenzhen, China. Results indicated that human exposure to PFCs was prevalent in Shenzhen. Perfluorooctanoate (PFOA) was the dominant PFC contaminant in the serum samples, with a median concentration of 6.72 ng/mL, followed by perfluorooctane sulfonate (PFOS) with a median concentration of 2.07 ng/mL. Other PFCs were detected at much lower concentrations, with median concentrations ranging from 0.02 to 0.87 ng/mL. Statistically, no significant (P>0.05) gender differences were observed for any of the PFCs. Significant (P<0.01) positive correlations were found between age and serum concentrations of the target PFCs, except for perfluorobutane sulfonate (R = 0.16, P = 0.01), perfluorohexanoic acid (R = 0.08, P = 0.22), and perfluoroheptanoic acid (R = 0.11, P = 0.10). Based on the one-compartment pharmacokinetic model, the total daily intakes of PFOA and PFOS for the general population in Shenzhen were calculated as 0.63 and 0.20 ng/kg body weight/day, respectively.     

贝氏高原鳅不同组织原代培养的研究

采用胰酶半消化法,对贝氏高原鳅的吻端、肾脏和性腺组织的原代培养条件进行探究,使用MEM,RPMI1640,DMEM和DMEM/F12培养基进行培养;血清质量分数设置为10%,30%,50%和100%;分别置于37℃,26℃和室温(11～15℃)条件下培养,观察细胞在不同条件下的生长情况.初步确定了各组织原代培养的最佳条件是温度26℃、血清质量分数50%的条件下,吻端和肾脏组织在MEM培养基、精巢在DMEM培养基中生长情况最优.Giemsa染色显示各组织细胞结构完整,荧光染料Alexa fluor 488Phalloidin显示各组织细胞的微丝网络发达.     

套袋对凤凰柚果实品质的影响

就凤凰柚套袋处理对果实的外观、内质及农药和重金属残留的影响进行了研究,结果表明:套袋处理的果实较未套袋的果实表面光滑、金黄、色泽均匀,病虫斑果、污染果显著减少,其中病虫果减少了31.5%、畸形果及污斑果减少了49%,裂果率降低52.8%,商品率提高了22.5%,且极大减少了农药和重金属残留量.套袋处理的果实可溶性固形物含量基本没什么差异,但含糖量提高了14%,含酸量提高了6%,糖酸比提高了9%.     

锥度量空间中两个集值映射的公共不动点定理

在度量空间中引入了一种新的广义压缩条件,利用这种条件,在不要求正规锥的前提下,得到了满足广义压缩条件的集值映射的公共不动点的存在性结果.这些结果推广了一些锥度量空间中关于两个集值映射的最常见的公共不动点定理.     

茅台酒用有机高粱产量和品质与原料基地气象条件的关系

应用2008年分布在茅台酒原料基地,海拔370～1 301m地段209个农户栽培的有机高粱产量和品质资料,采用气候曲面技术(ANUSPLI)方法得到各地段的温度、降水量和日照数据,并对各地段有机高粱产量和品质及原产地气象条件进行了相关分析.结果表明:气温日较差对高粱产量、单宁质量分数有显著影响;降水量对高粱产量、单宁和淀粉质量分数有显著性影响;日照时数对高粱产量、单宁和淀粉质量分数有显著影响;其中气温、降水量和日照对高粱单宁质量分数的影响都为显著负相关.气象条件对高粱蛋白质质量分数无明显影响.该文依据相关分析结果建立了气候区划指标,并做出了优质酒用有机高粱栽培基地的气候区划,其优质有机高粱栽培基地最适宜区在赤水河流域中段的贵州省仁怀市北部、西部和西南部地区,适宜区在仁怀市东部和南部地区.     

试论职前英语教师的专业发展——同伴录像在免费师范生教育实习中的有效应用

为创新实践教学、提高实习实效,在免费师范生教育实习中开展基于社会建构主义、多模态话语分析理论的同伴录像.通过构建基于同伴录像的教育实习体系,在集体备课→导师教案指导→上课与同伴录像→录像回放→刺激回忆与导师、同伴讨论→个体反思→教学新设计→教学新行动等循环往复的过程中,提升实习生的课堂教学自信与专业发展意识,发展与他人合作交流的能力,提高教学技能与反思能力,促进了职前英语教师的专业发展.     

金佛山4种植物群落下表土炭屑特征初步分析

通过对比分析金佛山4种植被下表土炭屑形态和大小,揭示出森林群落与草本群落表土炭屑存在着较明显的差异.从炭屑形态上来区分:亚高山草甸表土中炭屑较薄,大部分为长方形或长条形,且其纵向边缘平直,横向断口一端相对平直,另一端较参差;森林群落下表土炭屑都较厚,多为近圆形或矩形,边缘参差不齐.炭屑大小上主要表现为:森林群落表土炭屑较小,平均L/W值为1.56±0.05,且L/W值大于3的炭屑不超过10%;亚高山草甸群落表土炭屑L/W值为1.77±0.10,且仍有超过10%的炭屑L/W值大于3.     

铌酸锂晶体的暗电导研究

通过对不同组分比(Li/Nb)纯铌酸锂(LiNbO3)晶体电压和电流的测量,发现不同组分比晶体的电导率随温度变化而变化的程度不同.提出小极化子对电导率的作用机制,并分析了LiNbO3晶体中双极化子和小极化子对电导率的影响.最后对所测量的电导率进行拟合,得到了不同组分比晶体的激活能.     

宽端接圆柱杆的复合指数形变幅杆的设计

利用替代法得到了复合指数形变幅杆的频率方程,在此基础上解算出谐振长度、放大系数等重要参数,并借助于ANSYS软件对复合变幅杆进行模态分析.结果表明该方法对复合形变幅杆的设计是可行的,也显示了ANSYS在变幅杆设计中的重要性.这给其他复合变幅杆的设计提供了参考.