东莞地名语言及文化研究——兼论言语社区理论在地名研究中的应用

地名是一种语言符号,也是一种文化符号。东莞作为岭南文明的重要发源地、中国近代史的开篇地、改革开放后的世界工厂,其地名有着显著的语言和文化特征。本文以言语社区理论为指导,分析了东莞地名的构词特征,并重点阐释了其文化内涵。文章还对东莞地名的规范化问题提出了具体的意见。     

铜包石墨粉体的制备及表征

为简化铜包石墨粉体的制备工艺,提高镀铜质量,选用固定碳质量分数大于99％的天然石墨粉作为原料,在镀液组成确定的前提下,采用自行设计的电镀装置进行超声电镀,制备铜包石墨复合粉体.利用SEM对粉体的微观形貌进行表征.结果表明,超声施镀60 min,能较好地解决石墨颗粒的团聚问题,改善镀铜效果;铜呈细小颗粒状聚集附着在石墨的表面,包覆效果良好.该研究为铜包石墨粉体制备提供了新方法.     

聚偏氟乙烯（PVDF）/聚己内酯（PCL）共混体系的晶体结构和形貌

使用偏光显微镜（POM）和扫描电子显微镜（SEM）等测试手段,研究了PVDF/PCL共混体系在不同配比和结晶温度下晶型结构、球晶和片晶形貌的变化规律。结果表明：PVDF在低温下形成α型球晶,在高温下形成γ型球晶;两种不同晶型的球晶尺寸均随着结晶温度的升高而增大;α型PVDF环带球晶的环带间距随着体系内PCL含量的增多而增大。此外,共混体系内γ型PVDF球晶的含量也随着PCL含量的增大而增大。     

High-performance flexural fatigue of carbon nanotube yarns

Carbon nanotube yarns （CNTY） possess good specific strength and specific conductivity. As such, their potential for commercial applications is significant. Fatigue performance is a significant consideration in yarn/wire applications. In this study, the flexural fatigue performance of CNTY spun from super-aligned carbon nanotube arrays was investigated using a reversed bending test. The results showed that CNTY exhibited excellent resistance to pure flexural fatigue, significantly outperforming stainless steel wire; CNTY failed where a combination of flexural fatigue and tension-tension fatigue had special hollow fracture morphology, and CNTY resistance remained fundamentally unchanged in the combination fatigue process.     

Molecular and morphological identification of two new African species of Dugesia (Platyhelminthes,Tricladida, Dugesiidae) from Cameroon

The paper describes two new Dugesia species collected from the rivers Messassi and Ntsetsensooh in Cameroon, representing the first planarian flatworms documented from this country. Based on morphological data, the new species Dugesia bijuga Harrath & Sluys, sp. nov. is characterized mainly by the presence of two diaphragms, a barrel-shaped penis that is traversed by numerous ducts of penis glands and is provided with a short nozzle, and the presence of two atrial folds. The other new species, Dugesia pustulata Harrath & Sluys, sp. nov., is characterized mainly by absence of a penis bulb, presence of a large, elongated and weakly muscular seminal vesicle, and by the ventroposterior section of the bursal canal being thrown into distinct folds. The phylogenetic position of the two new species was determined through a molecular phylogenetic tree, based on a mitochondrial and a nuclear gene, including species from the major geographical range of distribution of the genus Dugesia. The phylogenetic tree revealed that the Cameroon lineage does not constitute a monophyletic group with the other Afrotropical species; it also showed that the African continent may house a great diversity of Dugesia species that still remains to be discovered.

urn:lsid:zoobank.org:pub:007441A5-F037-4950-9F5B-AD6ED12A40ED     

Phylogenetic relationships of millipedes in the subclass Penicillata (Diplopoda) with a key to the genera

Bristly millipedes (subclass Penicillata, order Polyxenida) are minute diplopods characterised by uncalcified cuticle and a body covered with unique tufts of bristles. The order is found worldwide and comprises less than 200 described species divided into three families, with many of the species and genera being poorly known. The first evolutionary analysis of the order presented here utilises both molecular (COI, 18S rRNA and 16S rRNA) and morphological data to examine monophyly of the families and subfamilies and the evolutionary relationships between them. Maximum likelihood analysis was based on molecular data only, whereas parsimony analyses were based on molecular data as well as combined morphological and molecular data. The results of these analyses with two different optimality criteria were incongruent in many aspects. Unlike parsimony, the likelihood result found strong support for a basal position of the family Synxenidae and separation of the order into two monophyletic clades corresponding to the two superfamilies Synxenoidea, containing the family Synxenidae, and Polyxenoidea, containing the families Polyxenidae and Lophoproctidae. Parsimony results did not support the existence of the two superfamilies. Both analyses resolved the family Synxenidae as monophyletic and Polyxenidae as polyphyletic, whereas the family Lophoproctidae was shown to be paraphyletic in likelihood and monophyletic in parsimony analysis. The subfamilies Monographinae and Polyxeninae were found to be monophyletic in the likelihood tree but parsimony suggested paraphyly of both. The results suggest that further revision of the systematics of the Polyxenida may be necessary. However, a much larger molecular data set will be necessary to clarify and provide stronger nodal support for phylogenetic trees and to confirm the relationships, particularly of the families Polyxenidae and Lophoproctidae. Molecular identification is likely to be an important tool for this taxonomically challenging order in future. A simplified key to the genera is provided.     

高温时H13钢中初生碳氮化物的分解研究

利用光学显微镜、扫描电镜和电子探针研究了H13钢中初生碳氮化物高温分解时的形貌、尺寸、成分变化规律.原始初生碳氮化物主要为10~30μm的长条状(Vx,Mo1-x)(Cy,N1-y)及少量方形的(Tix,V1-x)(Cy,N1-y).在1200℃保温2.5 h后碳氮化物边缘变为凹凸不平的锯齿状,然后形成细小的分解颗粒,10 h后碳氮化物平均长度减小为12.9μm,主要为(Tix,V1-x)(Cy,N1-y).当经过1250℃ ×5 h保温后87%的碳氮化物发生分解,(Vx,Mo1-x)(Cy,N1-y)溶解消失,碳氮化物长度在20μm以下,当保温时间延长到10 h后碳氮化物长度均在10μm以下,70%为方形并且93%分解形成细小颗粒,未分解的碳氮化物为(Tix,V1-x)(Cy,N1-y).电子探针分析(Tix,V1-x)(Cy,N1-y)的分解与Fe元素扩散有关,高温时Fe在(Tix,V1-x)(Cy,N1-y)中含量逐渐增加而Ti、V减少,优先在边部曲率半径较小部位或缺陷处分解,形成0.1~1μm的细小分解颗粒,并由外向内以区域溶解方式使原始碳氮化物逐渐消失.双亚点阵模型分析两种碳氮化物的平衡溶解温度和组成有关,试样中大部分(Tix,V1-x)(Cy,N1-y)平衡溶解温度在1200~1246℃之间,与实验吻合较好.     

海黍子(Sargassum muticum)不同分枝的形态观察与离体培养

【目的】观察海黍子不同分枝的形态特征,并研究离体培养条件下三生分枝的生长和生殖托数量的变化情况。【方法】采用形态观察法和离体培养技术,分别研究三生分枝在次生分枝上的分布、其数量与次生分枝长度的关系、其长度与生殖托数量的关系,并对离体培养前后三生分枝特定生长率及生殖托数量变化情况进行研究。【结果】三生分枝数量与次生分枝长度呈正相关;生殖托数量同三生分枝的长度呈正相关。离体培养实验期内,生殖托数量增长一般不超过2个;三生分枝均有不同程度的增长,特定生长率多数集中在0%~2%。【结论】海黍子不同分枝尤其是三生分枝的生长和发育有助于海黍子有性繁殖过程,可以保障海黍子群体的不断繁衍。     

New findings of Hexalona-branch representatives in Brazil,with a description of Prenda gen. nov. (Crustacea: Anomopoda: Aloninae)

Altogether, Coronatella and Hexalona-branches are considered the main lineages of Aloninae – a subfamily of common bottom-dwelling microcrustaceans in freshwater environments. Although the taxonomic features of Brazilian members of the Hexalona-branch have been summarised for species from the costata-group and affinis-group, a revision of other widely distributed species in the world is still lacking in this country. The aim of this paper was to study the morphology of Brazilian populations from the guttata-group and intermedia-group, and to describe a new genus from the Hexalona-branch. The parthenogenetic females of Alona cf. guttata from Brazil have similar morphology when compared to data from the literature, but the armature of the terminal claw of its males seems to be different from those of Alona guttata sensu stricto, Alona barbulata and Alona werestschagini. The intermedia-group is formed by Alona elisae sp. nov., which seems to be endemic to the Cerrado of Brazil Central, and Alona isabellae sp. nov., which is widely distributed in Brazil; this species has a labral keel armed with 2–4 setulae, and postabdomen with setulae of lateral fascicles longer than the level of marginal denticles, morphological traits that differentiate it from Alona elisae sp. nov. Another endemic species from the Hexalona-branch is Prenda arvensis gen. nov. and sp. nov., which has two main head pores, a reduced seta on endite 1 of the first limb, sixth limb is a wide lobe. The potential of biodiversity from the Hexalona-branch from Brazil is still underestimated, and a global revision of the guttata-group and intermedia-group is very important for the progress of Aloninae taxonomy and systematics.

http://zoobank.org/urn:lsid:zoobank.org:pub:0A2E4A30-0C9C-43E8-8E72-1DEDA6AFF3C3