新型高温永磁体的研制

通过分析影响磁体高温性能的因素,设计了新磁体的成分为:Cu含量高,Fe含量低,Zr适量,Sm含量高;采用粉末冶金工艺制备了高温Sm_2(CoFeCuZr)_(17)永磁体。制得的磁体室温磁性能为:B_r1.075 T,H_(ei)2 098.2 kA/m,H_(eb) 776.1 kA/m,H_k843.8 kA/m,(BH)_(max)210.0 kj/m~3;在200℃时的磁性能为:B_r0.991 T,H_(ci)1 175.7 kA/m,H_(cb)531.7 kA/m,H_k577.9 kA/m,(BH)_(max)172.5 kJ/m~3;矫顽力温度系数β(20～200℃)为-0.24％/℃。经理论分析和实验验证,磁体的使用温度均超过400℃,为高温环境(高于400℃)提供了一种实用性永磁材料。     

小议变动成本法的合理性

企业对盈亏临界点的计算通常是以变动成本法为基础，但也有以制造成本法为计算基础的，对于这两种成本方法计算的几种盈亏临界点的情况，本文结合案例，通过比较分析认为：盈亏临界点的计算应当以变动成本法为基础更为合理。     

WDB620高强钢应用于大型蜗壳的焊接制造工艺研究

2005年初,水电十四局承担了漫湾二期水电站和小湾水电站蜗壳的制造任务。蜗壳钢材选用国产600 MPa级别高强钢,为了全面综合地考核该级别钢种的材料强度和安全裕度,检验模拟大型蜗壳焊接制造工艺的可靠性。对国产的WDB620高强钢进行了可焊性和制造工艺性试验研究,并在国内首次设计、制造模拟压力容器并对其进行水压试验和爆破试验。研究成果通过中国水电集团公司鉴定,结论为该课题研究成果达到国内选进水平。     

绿色供应链管理的基本原理

人口、资源与环境三者之间的矛盾日益突显，要求制造业提高其活动与环境的相容性。绿色供应链管理是从系统的观点与集成的思想出发解决制造业与环境之间冲突的有效方式。从可持续发展的思想出发建立了绿色供应链的概念模型，分析了绿色供应链管理的目标，在此基础上探讨了绿色供应链管理的基本原理，认为共生原理、循环原理、替代转换原理与系统开放原理是实施绿色供应链管理应该遵循的基本原理。     

建筑陶瓷企业实施精益生产研究

分析了建筑陶瓷企业实施精益生产的条件和当前推行精益生产的主要障碍，对应用中存在的问题进行了分析并提出了相关建议。     

用窄带滤光片作为调谐元件的外腔半导体激光器

分析了窄带滤光片的调谐原理，拟合了一块实际滤光片的透射率函数，它是理论的透射率函数和一个洛仑兹函数的乘积。利用１．３μｍ的外腔式调谐激光器实现了１２７２．５ｎｍ至１２９１．７ｎｍ范围内的不连续宽带调谐。     

T(x) phase diagram of the Cu2Se-Al2Se3 system

Twenty alloys of various compositions in the Cu₂Se-Al₂Se₃ system were prepared and investigated. The T(x) phase diagram of the Cu₂Se-Al₂Se₃ system was obtained from x-ray diffraction, differential thermal analysis, and microstructure investigation for the first time. The homogeneity region of the CuAlSe₂ semiconducting compound was established. Previous articles by this author were presented with the spelling of his name as B.V. Korzun.     

Tandem queues with general blocking: A unified model and comparison results

We study tandem queues with finite intermediate buffers and develop a general blocking scheme that unifies and generalizes various blocking schemes previously studied in the literature, such as manufacturing blocking, communication blocking, kanban blocking and its variations. In the general blocking scheme, job movement and service at each stage are controlled by three parameters, which represent, respectively, the upper limits (at that stage) on work-in-process inventory, finished goods inventory, and buffer space. We derive a set of recursive equations that characterize the dynamics of the system, in terms of the job completion and departure processes, and establish comparison results for these processes in the settings of stochastic ordering, variability ordering and stochastic convexity. Free of distributional assumptions, the results provide characterization of system behavior with respect to the control parameters as well as to the arrival and service processes. We also compare system performance under two different modes of operation: make-to-order versus make-to-stock, and demonstrate the trade-off between improving service and reducing inventory. Numerical studies are also presented to illustrate the diversity of performance trade-off, including composition of inventory, offered by the general model.Supported in part by NSF under grant ECS-89-96201.     

自聚焦光纤对半导体激光束的准直研究

介绍了一种新颖的利用自聚焦光纤对半导体激光束的准直技术。该方法结构简单、调整方便。实验研究表明其可使大发散角的半导体激光束压缩到0.01º的数量级,适合作半导体激光器的准直元件而运用于精密测试领域。     

抽油机球铁齿轮的化学成分及生产工艺

为提高抽油机减速器齿轮铸件的机械性能，提出以Sn代替Mo作为合金元素，并通过试验确定了合理的Si、Cu、Sn的加入量。指出Si加入量应控制在1．9％－2．1％范围内，同时加入0．36％～0．9％的Cu和0．025％～0．07％的Sn，可保证球铁的强度和延伸率都满足QT700－2的要求。鉴于试件与实际铸件的表面硬度有一定的差值，为提高铸件表面硬度，进行了余热正火试验，并给出了铸件在铸型内的时间－冷却温度曲线。最后根据球铁化学成分的选择结果，进行了齿轮生产试验。