Fracture toughness of short carbon fibre reinforced thermoplastic polyimide

The fracture toughness testing of short fibre reinforced thermoplastic materials were performed. Materials tested were the polyimide resin and also that reinforced with 20 wt% or 30 wt% short carbon fibre. For introducing the initial crack, the tapping method, the sliding method and the bridge indentation method were examined. Among them, the sliding method was found to be effective for every case. The fracture tests were conducted by the three-point bending test with several loading rates. Stable crack growth was observed for the neat material while unstable fracture occurred for the reinforced materials. The critical values of the stress intensity factor at crack initiation were greater for the reinforced materials than for the neat resin. The fracture toughness of the 30 wt% reinforced material was independent of loading rate while that of 20 wt% reinforced material increased with loading rate. In order to investigate the fracture mechanisms, fractographic observations were also performed.     

Long multifilament Bi-2223 Ag-sheathed superconducting tapes and solenoids

Multifilament Ag-sheathed BiPbSrCaCuO (2223) superconducting tapes containing 49 filaments were fabricated by the powder-in-tube route and the roll-anneal process. The transport critical current densityJ _c was 1.3×10⁴ A cm^–2 at 77 K and 7×10⁴ A cm^–2 at 4.2 K in self-field. A 12-m-long tape was used to construct superconducting solenoids (50, 28, and 14 mm internal diameters) generating dc fields 380–1070 G at 4.2 K. Measurements of the variation ofJ _c with field (0–1.6 T) and bend strain (0–5%) are used to explain the performance of the solenoids. The critical bend strain of tapes was about 1.5%.     

辽宁省白石水库主要地质问题综述

本文着重就区域构造稳定性、水库渗漏、坝线比选、坝基地层岩性、坝基地质构造、坝基缓倾角结构面、坝基渗漏与渗透稳定、大坝下游冲刷坑、天然建筑材料等主要地质问题进行了综合评述。     

我国乳品加工技术创新体系发展方向的研究

从乳品加工产前、产中、产后三个方面，论述了我国乳品工业在技术方向应优先发展领域和发展方向。     

利用黄河泥沙加固下游大堤

黄河是一条举世闻名的多泥沙河流，善淤、善决、善徒给沿河人民带来对过深重灾难，防洪问题一直是国家的心腹之患。泥沙问题是黄河防洪问题的症结所在。在总结固大堤经验的基础，进行挖河疏浚，淤筑“相对地下河”，已作为黄河治理的一项重大决策付诸实施。     

PMN-PT陶瓷中的氧缺位及其消除

研究了组成中Pb含量的变化对组成为Pbx(Mg1/3Nb2/3)0.65Ti0.35O3的铌镁酸铅-钛酸铅(PMN-PT)陶瓷压电性能的影响,发现化学计量比组成(x=1)的Pbx(Mg1/3Nb2/3)0.65Ti0.35O3陶瓷经常出现压电性能的大幅度退化现象,而A位适量缺Pb能稳定地获得高性能的Pbx(Mg1/3Nb2/3)0.65Ti0.35O3陶瓷。XPS元素价态分析的结果表明,化学计量比的Pbx(Mg1/3Nb2/3)0.65Ti0.35O3陶瓷中含有较多的氧缺位,氧缺位的产生源于MgNb2O6(MN)合成过程中的气氛差异,A位适量缺Pb能有效地消除这种氧缺位而稳定地获得正常的压电性能,其机理被认为是氧缺位与铅缺位的复合。     

煤矿生产、安全调度LED电子大屏幕显示系统的设计

通过比较煤矿生产、安全调度显示方式的优缺点，提出和分析了适合于煤矿生产安全调度的ＬＥＤ电子大屏幕显示系统配置、功能及特点。     

利用信息融合方法的三维特征提取

本文提出了一种基于信息融合的物体三维特征的提取方法，该方法利用两幅互相配准的三维测距图像和灰度图像，来提取多面体的三维特征。首先，通过分析灰度图像中的灰度变化及测距图像中的测距值变化，分别求取各自图像中物体的特征点及特征边；然后，利用两配准图像之间的对应关系，求得所有特征点、面与多边形在三维测距图像中的三维表示；接着，通过分析三维测距图像中所测得的各候选平面上特定点与边处的曲率及法向，验证候选平面     

改性双马来酰亚胺的研究

本文研究了双马来酰亚胺与烯丙基化合物形成的改性树脂体系的固化和热性能，讨论了单体配比、增韧剂、催化剂对性能的影响。     

2-乙基己酸的制备

研究了 2乙基己酸的制备 ,该反应是 2乙基己醇与氢氧化钠在催化剂存在下进行氧化、脱氢 ,生成产物2乙基己酸。通过实验找到了一种新型、高效、廉价的催化剂 ,以及最佳反应条件。通过对 2乙基己酸的分析测试 ,产品完全符合质量标准。