Analysis of adaptive routing schemes in multirate loss networks

As technology evolves, it is now feasible to implement sophisticated adaptive routing schemes on networks which support different kinds of services with heterogeneous bandwidth characteristics. Adaptive routing can increase the network throughput by routing calls to less congested paths. It can also be used to bypass transmission facility failures. In this paper, we analyze and compare two adaptive routing schemes. The first is called theMaximum mean time to blocking (MTB) routing which is based on themean time to blocking measure of a link. This measure captures the traffic rates, bandwidth characteristic and link capacity information and reflects more accurately the congestion status of different paths. The second is theM ² routing, which is a modification of the least loaded routing (LLR). Aggregation of link status information can significantly reduce signalling traffic. We show in this paper that with properly designed aggregation, the aggregatedM ² and MTB routings can have performance that approach that of the non-aggregated schemes. The use of complete sharing and restricted access policies together with trunk reservation control in multirate loss networks are also studied.     

Optical gain of interdiffused InGaAs-As and AlGaAs-GaAs quantumwells

We have analyzed theoretically the effects of interdiffusion on the gain, differential gain, linewidth enhancement factor, and the injection current density of In_0.2Ga_0.8As-GaAs and Al_0.3Ga_0.7As-GaAs quantum-well (QW) lasers. We have calculated the electron and hole subband structures including the effects of valence band mixing and strains. The optical gain is then calculated using the density matrix approach. Our results show that the gain spectrum can be blue-shifted without an enormous increase in the injected current density. Imposing an upper limit (416 A·cm^-2) on the injection current density for a typical laser structure, we find that the InGaAs-GaAs and AlGaAs-GaAs QW lasers can be blue-shifted by 24 and 54 mn, respectively. Our theoretical results compare well with the tuning ranges of 53 and 66 meV found for AlGaAs-GaAs QWs in some experiments. This indicates that the interdiffusion technique is useful for the tuning of laser operation wavelength for multiwavelength applications     

HAP陶瓷合成的研究

本文对生物陶瓷材料－羟基磷灰石的合成进行了研究。试验将激光合成与湿法合成对比分析，着重探讨了在激光辐照下生物陶瓷的形貌，粒度，化学组成和结构等的变化规律，对激光涂敷生物陶瓷涂层有一定的指导意义。     

Triangular ray-tube analysis of dielectric lens antennas

A new method of analysis for the radiation characteristics of dielectric lens antennas with arbitrary inner and outer surfaces is presented. The analysis is based on representing the feed illumination by a contiguous set of ray tubes and including the effects of surface reflections and ray divergence. Radiation patterns and the antenna gain are then computed by evaluating the closed-form expressions developed for the Kirchhoff's integral of the aperture fields. The validity of the analysis method has been demonstrated by comparing the computations with measured results of two different spherical lenses and a shaped lens configurations. The analysis method presented takes into account some of the practical aspects associated with lens design such as surface zoning to reduce the mass and surface matching to minimize the reflection loss     

压电复合材料PT－P（VDF／TeFE）的静水压压电性

用热轧辊机制备了压电复合材料ＰＴ－Ｐ（ＶＤＦ／ＴｅＦＥ），并利用ＬＣＲ电桥和Ｂｅｒｌｉｎｃｏｕｒｔ电路分别测量了其介电常数和压电常数，实验结果表明它具有良好的静水压压电特性。最后讨论了该复合材料在水听器中的应用     

GHJMn高抗磨合金衬板在大型水泥磨机上的应用

自1882年英国工程师R·A·哈特菲尔德发明标准奥氏体高锰钢(ZGMn13)以来,由于这种韧性较好的耐磨材料,自身具备加工硬化(冷作硬化)的机械性能,诱发A→M相变,可获得高强度、高硬度(HB500以上),从而提高材料耐磨性和使用寿命的特性.所以,一直能够沿用至今天.     

辽河减压渣油中金属铁的赋存与分布特征

考察了辽河减渣在吸附分离、酸性溶液萃取和沥青质轻度降解过程中金属铁的分布和转移情况。结果表明，辽河减渣中有近90％的铁富集在胶质和沥青质中，部分铁以侧链较短的环烷酸盐或酚盐形式存在，部分铁连接在沥青质分子的侧链上，或是被包裹在沥青质大分子中。     

Feasibility study on the use of polyallyldiglycol-carbonate cell dishes in TUNEL assay for alpha particle radiobiological experiments

In the present work, we have studied the feasibility of a method based on polyallyldiglycol-carbonate (PADC) films to investigate the effects of alpha particles on HeLa cervix cancer cells. Thin PADC films with thickness of about 20 μm were prepared from commercially available CR-39 films by chemical etching to fabricate custom-made petri dishes for cell culture, which could accurately record alpha particle hit positions. A special method involving “base tracks” for aligning the images of cell nuclei and alpha particle hits has been proposed, so that alpha particle transversals of cell nuclei can be visually counted. Radiobiological experiments were carried out to induce DNA damages, with the TdT-mediated dUTP Nick-End Labeling (TUNEL) fluorescence method employed to detect DNA strand breaks. The staining results were investigated by flow cytometer. The preliminary results showed that more strand breaks occurred in cells hit by alpha particles with lower energies. Moreover, large TUNEL positive signals were obtained even with small percentages of cells irradiated and TUNEL signals were also obtained from non-targeted cells. These provided evidence for the bystander effect.