General topology optimization method with continuous and discrete orientation design using isoparametric projection

A general topology optimization method, which is capable of simultaneous design of density and orientation of anisotropic material, is proposed by introducing orientation design variables in addition to the density design variable. In this work, the Cartesian components of the orientation vector are utilized as the orientation design variables. The proposed method supports continuous orientation design, which is out of the scope of discrete material optimization approaches, as well as design using discrete angle sets. The advantage of this approach is that vector element representation is less likely to fail into local optima because it depends less on designs of former steps, especially compared with using the angle as a design variable (Continuous Fiber Angle Optimization) by providing a flexible path from one angle to another with relaxation of orientation design space. An additional advantage is that it is compatible with various projection or filtering methods such as sensitivity filters and density filters because it is free from unphysical bound or discontinuity such as the one at θ = 2π and θ = 0 seen with direct angle representation. One complication of Cartesian component representation is the point‐wise quadratic bound of the design variables; that is, each pair of element values has to reside in a given circular bound. To overcome this issue, we propose an isoparametric projection method, which transforms box bounds into circular bounds by a coordinate transformation with isoparametric shape functions without having the singular point that is seen at the origin with polar coordinate representation. A new topology optimization method is built by taking advantage of the aforementioned features and modern topology optimization techniques. Several numerical examples are provided to demonstrate its capability. Copyright © 2014 John Wiley & Sons, Ltd.     

Strong Surface‐Termination Effect on Electroresistance in Ferroelectric Tunnel Junctions

Tunnel electroresistance in ferroelectric tunnel junctions (FTJs) has attracted considerable interest, because of a promising application to nonvolatile memories. Development of ferroelectric thin‐film devices requires atomic‐scale band‐structure engineering based on depolarization‐field effects at interfaces. By using FTJs consisting of ultrathin layers of the prototypical ferroelectric BaTiO₃, it is demonstrated that the surface termination of the ferroelectric in contact with a simple‐metal electrode critically affects properties of electroresistance. BaTiO₃ barrier‐layers with TiO₂ or BaO terminations show opposing relationships between the polarization direction and the resistance state. The resistance‐switching ratio in the junctions can be remarkably enhanced up to 10⁵% at room temperature, by artificially controlling the fraction of BaO termination. These results are explained in terms of the termination dependence of the depolarization field that is generated by a dead layer and imperfect charge screening. The findings on the mechanism of tunnel electroresistance should lead to performance improvements in the devices based on nanoscale ferroelectrics.     

Detection of light-absorbing iron oxide particles using a modified single-particle soot photometer

Copyright © 2016 American Association for Aerosol Research     

Chain stiffness and chain conformation of poly(α-methylene-γ-butyrolactone) in dilute solutions

The chain stiffness and local chain conformation of atactic poly(α-methylene-γ-butyrolactone) (PMBL), which is a side chain cyclic structural analog of poly(methyl methacrylate) (PMMA), with a weight-average molecular weight (M_w) ranging from 2.8 × 10³ to 2.6 × 10⁶ in N,N-dimethylformamide (DMF) and γ-butyrolactone (GBL) were characterized by size exclusion chromatography with a multi-angle light-scattering detector (SEC-MALS) and synchrotron radiation small-angle X-ray scattering (SAXS). Based on the Kratky-Porod worm-like chain model, the scattering functions and the M_w dependence of z-average root-mean-square radius of gyration <S²>_z^1/2 yielded the Kuhn segment lengths λ⁻¹, the diameter of the PMBL chains d, and the excluded-volume strengths in DMF and GBL. The local conformation of atactic PMBL in DMF and GBL were slightly larger than those of atactic PMMA, due to the presence of the conformationally rigid lactone ring structure.     

Change in molecular weight distribution by elution of polymers from PVA cast gel

Poly(vinyl alcohol) (PVA) cast gels with high degrees of polymerization and hydrolysis were prepared at room temperature. After sufficient exchange of the outer solvent by fresh pure water, the gel was re-dissolved in pure water at a high temperature. Using this solution, the cast gel was prepared again. This re-dissolution process was repeated again, and a third cast gel was prepared. During each swelling process after each cast-drying process, the amount of elution from the gel was measured and the molecular weight distributions of PVA in the gel as well as in the outer solvent were quantitatively evaluated. The molecular weight distribution of the eluted PVA was found to depend on that of the PVA in the gel; the average molecular weight gradually increased as the re-dissolution process was repeated, while the polydispersity indices of both the PVA from the gel and the eluted PVA decreased.     

c-axis oriented ZnO formed in a rotating magnetic field with various rotation speeds

A rotating magnetic field was used to fabricate c-axis oriented zinc oxide. The influence of rotating speed on orientation structure was also examined. The aligned axes had the largest diamagnetic susceptibility, which axis was difficult to align with a static magnetic field. In c-axis oriented ZnO, the degree of orientation (Lotgering factor) in the green compact ranged from 0.2 to 0.5 along c-axis. The Lotgering factor increased with rotating speed. For all samples with the rotating magnetic field, the degrees of orientation increased up to above 0.9 after sintering at 1573 K.     

Star-shaped poly(lactic acid) with carboxylic acid terminal groups via poly-condensation

A series of star-shaped poly(lactic acid)s with carboxylic acid terminal groups have been synthesized by direct poly-condensation of lactic acid in the presence of a poly-carboxylic acid core molecule with triphenylphosphonium trifluoromethanesulfonate (TPP-T) catalyst.These star-polymers had thermal properties not very much different from those of star-shaped poly(lactic acid) with hydroxyl terminal groups and linear poly(lactic acid), irrespective of the structure of the core molecule and number of polymer arms. Solubility and degradability of these star-polymers were, however, greatly enhanced compared to those of star-polymers with hydroxyl terminal groups and increased depending on the number of polymer arms. From the star-shaped polymers, a variety of ammonium salts and the corresponding carboxyamides were successfully prepared.     

Numerical simulation of critical current performance in Nb3Sn strand subjected to periodic bending deformation

In the ITER Engineering Design Activity (EDA), four NB₃Sn model coils were developed and successfully tested. However, it was revealed that the critical current of the conductor degraded with the increase of electromagnetic force. One of the explanations of this phenomenon is a strand bending caused by enormous electromagnetic force. The authors therefore developed a simulation code using the distributed circuit model to investigate dependency of the critical current performance on the periodic bending deformation. The simulation results were in good agreement with the experiments. The dependence of the critical current on the periodic transverse load, temperature, periodic load pitch, thickness of Ta barrier which prevents Cu stabilizer from being contaminated by Sn, twist pitch of the strand, and RRR of the bronze matrix was investigated using the developed code. The results showed that the critical current degraded less with decreasing the pitch of the transverse load and increasing the Ta barrier thickness. It suggests that the shorter cabling pitch and the larger bending stiffness prevent the critical current degradation. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(3): 7–15, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20923     

Service‐level assurance in high‐availability multi‐unit systems using the M‐for‐N backup scheme

In this paper, we investigate service‐level assurance in high‐availability multi‐unit systems using the M‐for‐N backup scheme. M‐for‐N shared protection (backup) systems with priority control (i.e. prioritized protection switching and prioritized re‐housing of repaired units) can be applied to actual telecommunication devices that are subject to service‐level agreement (SLA) involving reliability measures. A priority level is assigned to each end user in such a system and the switching and unit re‐housing process is subject to the priority. The main contribution of this paper is to give a practical computation method of the user‐perceived availability under the priority control. Our case studies for real telecommunication systems reveal the effect of priority control on the user‐perceived availability. Copyright © 2011 John Wiley & Sons, Ltd.