Pattern of latest tectonic motion and its dynamics for active blocks in Sichuan-Yunnan region, China

Based on the concept of "active blocks" and spatial distribution of historical earthquakes with surface ruptures as well as major and subordinate active faults. The Sichuan-Yunnan region can be divided into four first-order blocks. They are the Markam block (I), the Sichuan-Yunnan rhombic block (II), Baoshan-Pu'er block (III), and Mizhina-Ximeng block (IV). Cut by sub-ordinate NE-trending active faults, the Sichuan-Yunnan rhombic block (II) can be further divided into two sub-blocks: the northwestern Sichuan sub-block (II1) and the middle Yunnan sub-block (II2), while the Baoshan- Pu'er block (III) can be further divided into three sub-blocks: Baoshan sub-block (III1), Jinggu sub-block (III2), and Mengla sub-block (III3). A quantitative study of offset landforms is carried out and the basic types of active faults and their long-term slip rates along the major boundaries of active blocks of different orders in the Sichuan-Yunnan region are determined, through slip vector analysis, the motion states of the active blocks are clarified and the deformation coordination on the block margins is discussed. It is suggested that the tectonic motion of the blocks in this region is a complex or superimposition of three basic types of motions: southeastward sliding, rotating on vertical axis, and uplifting. The Markam block (I), the northwestern Sichuan sub-block (II1), and middle Yunnan sub-block (II2) have a southeastward horizontal sliding rate of 1-5 mm/a, clockwise rotating angular rate of 1.4-4(/Ma, and uplifting rate of about 1 mm/a. The Baoshan-Pu'er (III) and Mizhina-Ximeng (IV) blocks have also been extensively clockwise rotated. This pattern of motion is a strain response to the collision between the Indian and Eurasian plates and the localized deformation and differential slip on the block margins associated with the northward motion of the Indian Plate. Because a set of transverse thrusts between the blocks absorbs and transforms some components of eastward or southeastward sliding motion, the eastward escape or extrusion of the Tibetan Plateau is limited as "imbricated thrusting transformation-limited extrusion model".     

Active blocks and strong seismic activity in North China region

The active North China block consists of three second-order blocks: Ordos, North China Plain, and East Shandong-Huanghai Sea blocks. Two active tectonic zones, the Anyang-Heze- Linyi and Tangshan-Cixian zones, exist in the active North China Plain block and have separated the active block into 3 third-order active blocks, Taihangshan, Hebei-Shandong, and Henan-Huai blocks. The 3 third-order active blocks are characterized by their entire motion and are clearly different in their Cenozoic structures and deep structures. The active boundary tectonic zones between the third-order active blocks are less than those between the first- and second-order active blocks in their movement strength, extent, and seismic activity. The density of M ≥ 6 earthquakes in the boundary zones between active blocks is higher than that within the blocks by 9-22 times in the North China region, up to one order of magnitude on average. M ≥ 7 earthquakes occurred basically in the boundary zones between active blocks. The difference is not occasional, but reflects the nature of intraplate movement and the characteristics of strong seismic activity and is the powerful evidence for hypothesis of active blocks.     

Discovery of the Longriba fault zone in eastern Bayan Har block,China and its tectonic implication

Re-measured GPS data have recently revealed that a broad NE trending dextral shear zone exists in the eastern Bayan Har block about 200 km northwest of the Longmenshan thrust on the eastern margin of the Qinghai-Tibet Plateau. The strain rate along this shear zone may reach up to 4-6 mm/a. Our interpretation of satellite images and field observations indicate that this dextral shear zone corresponds to a newly generated NE trending Longriba fault zone that has been ignored before. The northeast segment of the Longriba fault zone consists of two subparallel N54°±5°E trending branch faults about 30 km apart, and late Quaternary offset landforms are well developed along the strands of these two branch faults. The northern branch fault, the Longriqu fault, has relatively large reverse component, while the southern branch fault, the Maoergai fault, is a pure right-lateral strike slip fault. According to vector synthesizing principle, the average right-lateral strike slip rate along the Longriba fault zone in the late Quaternary is calculated to be 5.4±2.0 mm/a, the vertical slip rate to be 0.7 mm/a, and the rate of crustal shortening to be 0.55 mm/a. The discovery of the Longriba fault zone may provide a new insight into the tectonics and dynamics of the eastern margin of the Qinghai-Tibet Plateau. Taken the Longriba fault zone as a boundary, the Bayan Har block is divided into two sub-blocks: the Ahba sub-block in the west and the Longmenshan sub-block in the east. The shortening and uplifting of the Longmenshan sub-block as a whole reflects that both the Longmenshan thrust and Longriba fault zone are subordinated to a back propagated nappe tectonic system that was formed during the southeastward motion of the Bayan Har block owing to intense resistance of the South China block. This nappe tectonic system has become a boundary tectonic type of an active block supporting crustal deformation along the eastern margin of the Qinghai-Tibet Plateau from late Cenozoic till now. The Longriba fault zone is just an active fault zone newly-generated in late Quaternary along this tectonic system.     

Active blocks and strong seismic activity in North China region

The active North China block consists of three second-order blocks: Ordos, North China Plain, and East Shandong-Huanghai Sea blocks. Two active tectonic zones, the Anyang-Heze-Linyi and Tangshan-Cixian zones, exist in the active North China Plain block and have separated the active block into 3 third-order active blocks, Taihangshan, Hebei-Shandong, and Henan-Huai blocks. The 3 third-order active blocks are characterized by their entire motion and are clearly different in their Cenozoic structures and deep structures. The active boundary tectonic zones between the third-order active blocks are less than those between the first- and second-order active blocks in their movement strength, extent, and seismic activity. The density of M· ·6 earthquakes in the boundary zones between active blocks is higher than that within the blocks by 9–22 times in the North China region, up to one order of magnitude on average. M· · 7 earthquakes occurred basically in the boundary zones between active blocks. The difference is not occasional, but reflects the nature of intraplate movement and the characteristics of strong seismic activity and is the powerful evidence for hypothesis of active blocks.     

Pattern of latest tectonic motion and its dynamics for active blocks in Sichuan-Yunnan region,China

Based on the concept of “active blocks” and spatial distribution of historical earthquakes with surface ruptures as well as major and subordinate active faults. The Sichuan-Yunnan region can be divided into four first-order blocks. They are the Markam block (I), the Sichuan-Yunnan rhombic block (II), Baoshan-Pu’er block (III), and Mizhina-Ximeng block (IV). Cut by sub-ordinate NE-trending active faults, the Sichuan-Yunnan rhombic block (II) can be further divided into two sub-blocks: the northwestern Sichuan sub-block (ll₁) and the middle Yunnan sub-block (ll₂), while the Baoshan- Pu’er block (III) can be further divided into three sub-blocks: Baoshan sub-block (Ill₁), Jinggu sub-block (lll₂), and Mengla sub-block (lll₃). A quantitative study of offset landforms is carried out and the basic types of active faults and their long-term slip rates along the major boundaries of active blocks of different orders in the Sichuan-Yunnan region are determined, through slip vector analysis, the motion states of the active blocks are clarified and the deformation coordination on the block margins is discussed. It is suggested that the tectonic motion of the blocks in this region is a complex or superimposition of three basic types of motions: southeastward sliding, ro-tating on vertical axis, and uplifting. The Markam block (I), the northwestern Sichuan sub-block (ll₁), and middle Yunnan sub-block (ll₂) have a southeastward horizontal sliding rate of 1-5 mm/a, clockwise rotating angular rate of 1.4-4°/Ma, and uplifting rate of about 1 mm/a. The Baoshan-Pu’er (III) and Mizhina-Ximeng (IV) blocks have also been extensively clockwise rotated. This pattern of motion is a strain response to the collision between the Indian and Eurasian plates and the localized deformation and differential slip on the block margins associated with the northward motion of the Indian Plate. Because a set of transverse thrusts between the blocks absorbs and transforms some components of eastward or southeastward sliding motion, the eastward escape or extrusion of the Tibetan Plateau is limited as “imbricated thrusting transformation-limited extrusion model”.     

Pattern of latest tectonic motion and its dynamics for active blocks in Sichuan-Yunnan region,China

Based on the concept of “active blocks” and spatial distribution of historical earthquakes with surface ruptures as well as major and subordinate active faults. The Sichuan-Yunnan region can be divided into four first-order blocks. They are the Markam block (I), the Sichuan-Yunnan rhombic block (II), Baoshan-Pu’er block (III), and Mizhina-Ximeng block (IV). Cut by sub-ordinate NE-trending active faults, the Sichuan-Yunnan rhombic block (II) can be further divided into two sub-blocks: the northwestern Sichuan sub-block (ll₁) and the middle Yunnan sub-block (ll₂), while the Baoshan- Pu’er block (III) can be further divided into three sub-blocks: Baoshan sub-block (Ill₁), Jinggu sub-block (lll₂), and Mengla sub-block (lll₃). A quantitative study of offset landforms is carried out and the basic types of active faults and their long-term slip rates along the major boundaries of active blocks of different orders in the Sichuan-Yunnan region are determined, through slip vector analysis, the motion states of the active blocks are clarified and the deformation coordination on the block margins is discussed. It is suggested that the tectonic motion of the blocks in this region is a complex or superimposition of three basic types of motions: southeastward sliding, ro-tating on vertical axis, and uplifting. The Markam block (I), the northwestern Sichuan sub-block (ll₁), and middle Yunnan sub-block (ll₂) have a southeastward horizontal sliding rate of 1-5 mm/a, clockwise rotating angular rate of 1.4-4°/Ma, and uplifting rate of about 1 mm/a. The Baoshan-Pu’er (III) and Mizhina-Ximeng (IV) blocks have also been extensively clockwise rotated. This pattern of motion is a strain response to the collision between the Indian and Eurasian plates and the localized deformation and differential slip on the block margins associated with the northward motion of the Indian Plate. Because a set of transverse thrusts between the blocks absorbs and transforms some components of eastward or southeastward sliding motion, the eastward escape or extrusion of the Tibetan Plateau is limited as “imbricated thrusting transformation-limited extrusion model”.

     

Aseismio fault slip and block deformation in North China

In North China, the tectonic fault-block system enables us to use the Discontinuous Deformation Analysis (DDA) method to simulate the long-term cross-fault survey and other geodetic data related to aseismic tectonic deformation. By the simulation we have found that: (1) Slips on faults with different orientation are generally in agreement with the ENE-WSW tectonic stress field, but the slip pattern of faulting can vary from nearly orthogonal, to pure shear along the strike of the faults, this pattern cannot be explained by simple geometric relation between the strike of the fault and the direction of the tectonic shortening. This phenomenon has been observed at many sites of cross-fault geodetic surveys, and might be caused by the interactions between different blocks and faults. (2) According to the DDA model, if the average aseismic slip rate along major active faults is at the order of several tenths of millimeter per year as observed by the cross-fault geodetic surveys, the typical strain rate inside a block is at the order of 10^–8 year^–1 or less, so that the rate of 10^–6 year^–1, as reported by observations in smaller areas, cannot be the representative deformation rate in this region. (3) Between the slips caused by regional compression and block rotation, there is a possibility that the sense of slip caused by rigid body rotation in two adjacent blocks is opposite to the slip caused by the tectonic compression. But the magnitude of slip resulting from the tectonic compression is much larger than that due to the block rotation. Thus, in general, the slip pattern on faults as a whole agrees with the sense of tectonic compression in this region. That is to say, the slip caused by regional compression dominates the entire slip budget. (4) Based on (3), some observed slips in contradiction to ENE tectonic stress field may be caused by more localized sources, and have no tectonic significance.     

青藏高原北部活动地块内部的活断层定量资料

文中定义了祁连山活动地块的边界,列表给出了近十几年来在青藏高原北部活动地块内部的活断层定量资料。其内容主要包括:活断层的编号、名称、产状、主要的地质地貌标志、活动年代、断层分段、断层滑动速率、古地震及其年代、地震破裂带的主要特征等。这些资料表明:青藏高原北部活动地块的8级大地震集中在它的边界活断层上,断层的滑动速率都在5~12mm/a左右;7级左右的地震发生在其内部规模较小的断层上,断层的滑动速率都在1~3mm/a左右;青藏高原北部活动地块内部的活断层,可以将该活动地块划分为几个次级地块,这些次级活动地块以变形为主,没有发生旋转;我们的结果支持青藏高原"连续变形"的假说     

中国及邻区现代地块运动的数值模拟

本文利用板块几何学的方法研究中国及邻区地块间的相对运动,用数值方法计算了地块运动的角速度及边界断层的滑动速率。计算结果与活断层数据相当吻合,本文还利用地块运动速度讨论了我国现代构造活动     

青藏高原东南缘滇缅地块NE向走滑断裂带的新构造活动与大地震危险性

2008年汶川大地震发生以来,位于青藏高原东南缘实皆断裂带和红河断裂系之间滇缅地块发生了一系列MS5.5以上中强地震,该地区未来是否可能发生MS7.0以上大地震的危险性,十分令人关注.本研究以滇缅地块内部最长的NE向走滑断裂带——南汀河断裂带为例,结合遥感图像、数字高程模型(DEM)和1∶20万地质图,对断裂带附近的水系系统拐弯地貌特征和大型地质体单元位错信息进行提取分析,并根据这些断裂带左旋走滑起始年代(5 Ma),推算其长期走滑速率.研究结果表明研究区NE向断裂带自上新世以来,具有2mm·a-1的长期走滑速率;此外,根据发生在断裂带上及其周边地区的历史地震、大震复发周期和区内现代构造应力场的分布分析发现,沿这些NE向大型左旋走滑断裂带未来具有MS7.0以上大地震发生的危险性.     

云南强震活动的多层次动力源分析

对云南地区多层次动力过程作了分析研究，结果表明，若以两大板块之间在边界上的相互作用为最高层次的动力作用，云南地区现代构造运动至少包括三个层次的动力作用过程：(1)印度板块和亚欧板块两大地壳板块在喜马拉雅碰撞带东部弧顶和东翼相互作用产生的边界动力源对云南地区产生的直接影响和间接作用；还有菲律宾海板块对亚欧板块的北西西向的推挤，通过华南地区对云南东部的间接作用，构成了云南地区现代构造运动第一层次动力作用；(2)以康滇菱形断块为主体，包括川青断块、滇西南断块带等板内断块的整体向南南东—南东方向的相对移动产生的动力作用，是第二层次的动力作用；(3)由于板内断块边界断裂运动速率的差异，主要是水平滑动速率差异造成的板内断块内部次级断块移动产生的动力作用，是第三层次的动力作用。对印度板块和亚欧板块两大地壳板块碰撞挤压带东部弧顶和东翼相互作用产生的边界动力源与云南及邻区构造运动、构造应力场分布格局和强震活动关系作了分析研究，认为云南及邻区多层次动力作用过程，是强震活动时空分布的主要原因。     

PROGRESS IN APPLICATION OF GNSS TO DIVISION OF ACTIVE TECTONIC BLOCKS IN CONTINENTAL CHINA

Chinese scientists proposed that large earthquakes that occurred in mainland China are controlled by the movement and deformation of active tectonic blocks. This scientific hypothesis explains zoned phenomenon of seismicity in space. The active tectonic blocks are intense active terranes formed in late Cenozoic and late Quaternary, and the tectonic activity of block boundaries is the intensest. Global Navigation Satellite System(GNSS)has advantages of high spatio-temporal resolution, broad coverage, and high accuracy, and is utilized to monitor contemporary crustal deformation. High accuracy and resolution of GNSS velocity field within mainland China and vicinities provided by previous studies clearly demonstrate that different active tectonic blocks behave as different patterns of movement and deformation, and block interaction boundaries have intense tectonic deformation. The paper firstly introduces the GPS networks operated by the Crustal Movement Observation Network of China(CMONOC)since 1999, and GNSS data processing methods, including GAMIT, BERNESE and GIPSY/OASIS, and discusses the advantages of using South China block as a regional reference frame for GNSS velocity field, then proposes three strategies of block division, F-test, quasi-accurate detection(QUAD), and clustering analysis. Furthermore, we introduce rigid and non-rigid block motions. Rigid block motion can be denoted by translation and rotation, while non-rigid block motion can be described by rigid motion and internal strain deformation. Internal strain deformation can be divided into uniform and linear strains. We also review the usage of F-test to distinguish whether the block acts as rigid deformation or not. In addition, combining with recent GNSS velocity results, we elaborate the characteristics of present movement of rigid block, such as the South China, Tarim, Ordos, Alashan, and Northeast China, and that of non-rigid block, such as the Tibetan plateau, Tian Shan, and North China plain. Especially, the Tibetan plateau and Tian Shan seem to deform continuously with significant internal deformation. In order to enrich and perfect the active tectonic block hypothesis, we should carefully design dense GNSS networks in inner blocks and block boundaries, optimize utilizing other space geodesy technologies such as InSAR, and strengthen combining study of geodesy, seismogeology and geophysics. Through systematic summary, this paper is very useful to employing GNSS to investigate characteristics of block movement and dynamics of large earthquakes happening in block interaction boundaries.     

地块活动与成组地震关系的初步探讨

中国大陆构造的成块性与中国地震活动的成组性构成中国地震构造和地震活动的一个突出现象．本文在前人对中国大陆地震成组划分的结果和地块划分方案的基础上,研究了中国大陆地块与成组地震活动之间的关系,发现大部分强震分布于地块边界断层上,成组地震的孕育和发生与块体活动有关．由成组地震震中分布图表现出来的地块活动方式主要有４种:单缝式活动型、单地块活动型、多地块活动型和地块内部活动型．地块活动频度以单缝式活动型为最高,在成组地震中则以单地块活动型为多．大陆内部各地块的活动性有差别,东部比较活跃的地块有太行山和华北平原地块,西部比较活跃的地块有川滇和昆仑-松潘地块．      

中国大陆构造块体的现今活动和变形

在重新对 1998年和 2 0 0 0年的中国地壳运动观测网络基准站和基本站的 2期观测资料进行预处理的基础上 ,得到了ITRF97坐标框架下 ,参考时刻分别为 1998年 9月 5日和 2 0 0 0年 6月 8日 ,分布在全国各主要构造块体上的 79个GPS站的坐标和协方差矩阵。分别以中国岩石圈动力学地图集 (马杏垣 ,1989)中的中国大陆主要构造单元 (称之为亚板块 )和张培震等 ( 2 0 0 2 )给出的中国主要活动块体为格架 ,用笔者提出的 1种推广了的QUAD方法对中国大陆的 2 0个主要构造块体逐个进行判别检验。那些现今无明显相对运动的相邻块体则被归并起来 ,从而确定了活动块体和它们的边界。采用刚体运动 +块体均匀应变 +局部变形的模型作为描述中国大陆构造块体的现今活动和变形的模型。求出了有明显相对运动块体的欧拉运动矢量和块体的整体均匀变形参数、各块体内部的不均匀局部变形以及活动边界的活动方式和强度。在此基础上 ,除了一般地指出中国大陆地壳运动西强东弱的特征之外 ,还对西部主要活动块体和边界活动强弱给出了定量比较结果 ,从而为强震危险区的判别提供了形变背景依据     

A preliminary research establishing the present-time intraplate blocks movement model on the Chinese mainland based on GPS data

The Chinese mainland is regarded as the best area for studying the continental crustal movement and dynamics. In the past, based on the ground surface observation, it was very difficult to study the movement of the intraplate blocks within a range of larger space and a time scale of several years quantitatively. In this paper, a method of calculating the Euler vectors of present-time motion among blocks by using Cardan angles has been given completely based on two periods of GPS repetition measurement data of the National Ascending Plan of China (NAPC) — the study and application of current crustal movement and geodynamics in 1994 and 1996. A present-time blocks movement model on the Chinese mainland (PBMC-1), which describes the motion of seven blocks—Tibet, Chuan-Dian, Gan-Qing, Xinjiang, South China, North China and Heilongjiang block, is established preliminarily. The velocity field of the relative motion among the intraplate blocks and boundary motion in the Chinese mainland are firstly given within several years time scale. It is shown by the results calculated with the model that the velocity-rate of each block is reduced gradually from the south to north and from the west to east, and the motion direction changes gradually from NNE to E, even SEE or SE. The collision of Indian plate plays a leading role in the movement of the intraplate blocks in the Chinese mainland, while the motion manner and velocity-rate of block boundary zone (fracture zone) depend on the motion of every block again. The present-time motion of a time scale of several years computed with the model is not only largely consistent with the average motion of a time scale of several million years derived from geology, but also very coincident with the results of geophysical and astronomic observation. It is shown preliminarily that the observed results of space geodesy techniques such as GPS etc. are capable of discovering the crustal movement at present. This study is supported by the National Natural Science Foundation of China (NNSFC), National Ascending Plan of China (NAPC) and Chinese Joint Seismological Science Foundation (CJSSF).     

Correlation between movement of tectonicblocks and earthquakes in groups

Introduction ZHANG and ZHONG (1977), ZHANG, et al (1978) and ZHANG (1984) pointed out that Chinese mainland is divided into two parts by the NS-trending tectonic belt, i.e., the eastern area and the western area, and each area is divided into tectonic blocks by faults. In the eastern area, the faults are trending NNE and NNW, mainly NNE, and the long axis strike of blocks is nearly trending NS. In the western area, faults are trending NEE and NWW, mainly NWW, long axis strike …     

MIGRATION OF LARGE EARTHQUAKES IN TIBETAN BLOCK AREA AND DISSCUSSION ON MAJOR ACTIVE REGION IN THE FUTURE

On the basis of summarizing the circulation characteristics and mechanism of earthquakes with magnitude 7 or above in continental China, the spatial-temporal migration characteristics, mechanism and future development trend of earthquakes with magnitude above 7 in Tibetan block area are analyzed comprehensively. The results show that there are temporal clustering and spatial zoning of regional strong earthquakes and large earthquakes in continental China, and they show the characteristics of migration and circulation in time and space. In the past 100a, there are four major earthquake cluster areas that have migrated from west to east and from south to north, i.e. 1)Himalayan seismic belt and Tianshan-Baikal seismic belt; 2)Mid-north to north-south seismic belt in Tibetan block area; 3)North-south seismic belt-periphery of Assam cape; and 4)North China and Sichuan-Yunnan area. The cluster time of each area is about 20a, and a complete cycle time is about 80a. The temporal and spatial images of the migration and circulation of strong earthquakes are consistent with the motion velocity field images obtained through GPS observations in continental China. The mechanism is related to the latest tectonic activity in continental China, which is mainly affected by the continuous compression of the Indian plate to the north on the Eurasian plate, the rotation of the Tibetan plateau around the eastern Himalayan syntaxis, and the additional stress field caused by the change of the earth's rotation speed.
Since 1900AD, the Tibetan block area has experienced three periods of high tides of earthquake activity clusters(also known as earthquake series), among which the Haiyuan-Gulang earthquake series from 1920 to 1937 mainly occurred around the active block boundary structural belt on the periphery of the Tibetan block region, with the largest earthquake occurring on the large active fault zone in the northeastern boundary belt. The Chayu-Dangxiong earthquake series from 1947 to 1976 mainly occurred around the large-scale boundary active faults of Qiangtang block, Bayankala block and eastern Himalayan syntaxis within the Tibetan block area. In the 1995-present Kunlun-Wenchuan earthquake series, 8 earthquakes with M_S7.0 or above have occurred on the boundary fault zones of the Bayankala block. Therefore, the Bayankala block has become the main area of large earthquake activity on the Tibetan plateau in the past 20a. The clustering characteristic of this kind of seismic activity shows that in a certain period of time, strong earthquake activity can occur on the boundary fault zone of the same block or closely related blocks driven by a unified dynamic mechanism, reflecting the overall movement characteristics of the block. The migration images of the main active areas of the three earthquake series reflect the current tectonic deformation process of the Tibetan block region, where the tectonic activity is gradually converging inward from the boundary tectonic belt around the block, and the compression uplift and extrusion to the south and east occurs in the plateau. This mechanism of gradual migration and repeated activities from the periphery to the middle can be explained by coupled block movement and continuous deformation model, which conforms to the dynamic model of the active tectonic block hypothesis.
A comprehensive analysis shows that the Kunlun-Wenchuan earthquake series, which has lasted for more than 20a, is likely to come to an end. In the next 20a, the main active area of the major earthquakes with magnitude 7 on the continental China may migrate to the peripheral boundary zone of the Tibetan block. The focus is on the eastern boundary structural zone, i.e. the generalized north-south seismic belt. At the same time, attention should be paid to the earthquake-prone favorable regions such as the seismic empty sections of the major active faults in the northern Qaidam block boundary zone and other regions. For the northern region of the Tibetan block, the areas where the earthquakes of magnitude 7 or above are most likely to occur in the future will be the boundary structural zones of Qaidam active tectonic block, including Qilian-Haiyuan fault zone, the northern margin fault zone of western Qinling, the eastern Kunlun fault zone and the Altyn Tagh fault zone, etc., as well as the empty zones or empty fault segments with long elapse time of paleo-earthquake or no large historical earthquake rupture in their structural transformation zones. In future work, in-depth research on the seismogenic tectonic environment in the above areas should be strengthened, including fracture geometry, physical properties of media, fracture activity behavior, earthquake recurrence rule, strain accumulation degree, etc., and then targeted strengthening tracking monitoring and earthquake disaster prevention should be carried out.     

巴颜喀拉块体东部活动块体的划分、形变特征及构造意义

基于活动块体的基本概念,综合对研究区内活动断裂带空间展布、地震活动性等资料的分析将巴颜喀拉块体东部及邻区划分为巴颜喀拉块体（I）、华南块体（Ⅱ）、川滇块体（Ⅲ）和西秦岭块体（IV）等4个一级块体.利用GPS形变场、地球物理场等资料结合F检验法,将巴颜喀拉块体划分为阿坝（I₁）、马尔康（I₂）和龙门山（I₃）3个次级块体,将西秦岭块体划分为岷县（IV₁）和礼县（IV₂） 2个次级块体.利用分布在各个块体内部的GPS测站,计算各活动块体及块体边界断裂带的运动变形特征.结果表明：各活动块体的整体运动包括平移和旋转运动;东昆仑断裂带、甘孜—玉树断裂带和鲜水河断裂带的滑动速率明显高于龙门山断裂带的滑动速率;巴颜喀拉块体东部走向北西或北西西的边界断裂表现出左旋拉张的特性;走向北东的边界断裂带,除成县—太白断裂带外,均表现出右旋走滑兼挤压的活动特征.巴颜喀拉块体的东向运动存在自西向东的速度衰减,衰减主要被龙日坝断裂带和岷江断裂带分解吸收,其中龙日坝断裂带的水平右旋分解非常明显,约为~4.8±1.6 mm/a,岷江断裂带的水平分解较弱.龙门山断裂带被马尔康、龙门山和岷县等次级块体分成南、中、北三段,龙门山断裂带中段上的主压应变率要明显小于龙门山断裂带南段上的应变率,其北西侧变形幅度从远离断裂带较大到靠近断裂带逐渐减小,表明其在震前已经积累了较高的应变能,有利于发生破裂滑动.汶川地震后,地表破裂带和余震分布揭示的断裂带运动性质自南西向北东由以逆冲运动为主,逐渐转为逆冲兼走滑的特征可能与龙门山断裂带中段所受主压应力方向自南西向北东的变化有关.马尔康、龙门山和岷县3个次级块体与华南块体之间较低的相对运动速度以及龙门山断裂带低应变率、强闭锁的特征都决定了汶川地震前龙门山断裂带低滑动速率的运动特征.     

青藏块体东北缘近期水平运动与变形

利用青藏块体东北缘地区13、1年GPS观测资料，给出了本区地壳水平运动速度场及视应变场分布图，提出了由位移观测值直接求解块体旋转和变形参数的方法，初步研究了本区构造块体运动与变形特征.结果表明：①本区存在整体性向东-东南方的运动(速率约mm/a)；②南部的甘肃-青海块体的运动较快，而北部的阿拉善块体的运动较慢，二者运动速率相差近6mm/a，祁连-海原断裂带左旋走滑运动显著.③自西向东存在北北东-北东东向压性运动；④阿拉善块体、甘肃-青海块体内部存在北西西向张性变形，阿拉善块体的整体张性变形更显著，鄂尔多斯块体西侧的块体交接地带为压性运动.     

闽粤沿海全新世垂直构造运动的速率

基于华南地区新构造运动具有断块垂直差异运动的特征,本文主要根据目前已测定的,分布于闽粤沿海地区的若干个全新世海相沉积物的放射性年代,海拔高度等数据,初步估算和对比闽粤沿海不同断块构造区的垂直构造运动的速率,并探讨它与地震活动的关系