Transformation of Staphylococcus epidermidis and other staphylococcal species with plasmid DNA by electroporation

In this paper, the influence of various parameters on plasmid transformation by electroporation of Staphylococcus epidermidis Tü3298 was investigated. Cell growth conditions, various concentrations and forms of plasmid DNA, field strength, pulse duration and media for electroporation and regeneration were tested. In order to obtain optimal transformation efficiency, the cells were incubated for 30 min with DNA before pulsing. With the optimized procedure, other staphylococcal species such as S. aureus, S. staphylolyticus and S. carnosus were transformed with an efficiency up to 3 X 10(5) transformants per micrograms pC194 plasmid DNA.     

Transformation of the phytopathogenic bacterium Clavibacter michiganense subsp. michiganense by electroporation and development of a cloning vector.

We constructed a cloning vector for use in the plant pathogenic bacterium Clavibacter michiganense subsp. michiganense. The vector pDM100 consists of a 3.2-kb restriction fragment of the Clavibacter plasmid pCM1 joined to a pBR325 derivative carrying the neomycin phosphotransferase of transposon Tn5 and the gentamicin acetyltransferase of Tn1696. Both antibiotic resistance genes are efficiently expressed in C. michiganense subsp. michiganense. Although polyethylene glycol-mediated transfection of spheroplasts with the DNA of the C. michiganense subsp. michiganense-specific bacteriophage CMP1 yielded about 3 x 10(3) transfectants per microgram of DNA, in transformations with plasmid DNA only a very few transformants were obtained. However, the transformation efficiency could be improved by electroporation of intact cells, giving about 2 x 10(3) transformants per microgram of plasmid DNA. Since a transformation procedure and a cloning vector are now available, pathogenicity in C. michiganense subsp. michiganense can now be analyzed genetically.     

Plasmid transformation of Ruminococcus albus by means of high-voltage electroporation

To apply recombinant DNA techniques to the genetic manipulation of cellulolytic ruminal bacteria, a plasmid vector transformation system must be available. The objective of this work was to develop a system for plasmid transformation of Ruminococcus albus. Using high voltage electrotransformation, pSC22 and pCK17 plasmid vectors, derived from lactic acid bacteria plasmids and replicating via single-stranded DNA intermediate, were successfully introduced into three freshly isolated R. albus strains and into R. albus type strain ATCC 27210. The optimization of the electrotransformation condition raised the electroporation efficiency up to 3 x 10(5) transformants per microgram of pSC22 plasmid.     

Efficient electrotransformation of Enterococcus hirae with a new Enterococcus-Escherichia coli shuttle vector

In the present study, an Enterococcus-Escherichia coli shuttle vector, pC3, was constructed that allows efficient transformation by electroporation of Enterococcus hirae ATCC9790. 5 x 10(6) transformants per microgram of plasmid DNA were obtained, using a commercial capacitor discharge device with an improved circuitry and a home-made electrode assembly, delivering pulses of 24 kV/cm across the cell suspension. The transformants were stable without selective pressure and plasmid DNA reisolated from transformed cells displayed no alterations in restriction enzyme analysis. Chromosomal DNA from E coli or E hirae, carried by pC3, was stably maintained in E hirae, making cloning and genetic manipulation in this organism feasible.     

Improvement of transformation and electroduction in avermectin high-producer,<Emphasis Type="Italic">Streptomyces avermitilis</Emphasis>

Factors affecting the PEG-mediated transformation and electrotransformation of Streptomyces avermitilis protoplasts, an industrial avermectin high-producer, were evaluated. The maximum protoplast transformation efficiency under optimum conditions with PEG was 3 x 106 transformants per microg plasmid pIJ702 DNA. The efficiency of electrotransformation with the same plasmid the intact cells grown in medium with 0.5 mmol/L CaCl2, suspended in buffer with 0.5 mol/L sucrose +1 mmol/L MgCl2, and pulsed at an electric field strength of 10 kV/cm, 800 ohms, 25 microF, was of 2 x 10(3) transformants per microg DNA. When the cells were electroporated after mild lysozyme-treatment, the efficiency was up to 10(4) transformants per microg DNA. Electroporation of protoplasts and germlings had a lower efficiency (10(2) transformants per microg DNA). We report that electroporation under optimum conditions can be used for direct transfer of nonconjugative plasmid pIJ699 between two different Streptomyces species, S. avermitilis and S. lividans.     

Transformation of Bacillus thuringiensis vegetative cells by electroporation

A highly efficient procedure for the transformation of Bacillus thuringiensis and Bacillus subtilis using covalently closed circular plasmid DNA was developed by using the small Staphylococcus aureus plasmid pC194 and electroporation. We have achieved transformation efficiencies in B. thuringiensis subsp. kurstaki (HD-73) greater than 5 x 10(6) transformants/micrograms plasmid DNA. The electro-transformation (or electroporation) procedure also worked with B. subtilis 168 although at a 200-fold less level of efficiency. The results indicated that the plasmid exists in double and single-stranded forms both in B. subtilis and B. thuringiensis. A second single-stranded species was also observed in both species. This technique may prove to be applicable to other members of the genus Bacillus.     

Optimization of electroporation-mediated transformation: Staphylococcus carnosus as model organism

AIMS: The study was conducted with an aim to optimize the transformation efficiency of the Gram-positive bacterium Staphylococcus carnosus to a level that would enable the creation of cell surface displayed combinatorial protein libraries. METHODS AND RESULTS: We have thoroughly investigated a number of different parameters for: (i) the preparation of electrocompetent cells; (ii) the treatment of cells before electroporation; (iii) the electroporation step itself; and (iv) improved recovery of transformed cells. Furthermore, a method for heat-induced inactivation of the host cell restriction system was devised to allow efficient transformation of the staphylococci with DNA prepared from other species, such as Escherichia coli. Previously described protocols for S. carnosus, giving transformation frequencies of approximately 10(2) transformants per transformation could be improved to reproducible procedures giving around 10(6) transformants for a single electroporation event, using plasmid DNA prepared from either S. carnosus or E. coli. The transformed staphylococcal cells were analysed using flow cytometry to verify that the entire cell population retained the introduced plasmid DNA and expressed the recombinant protein in a functional form on the cell surface at the same level as the positive control population. CONCLUSIONS: The results demonstrate that the transformation frequency for S. carnosus could be dramatically increased through optimization of the entire electroporation process, and that the restriction barrier for interspecies DNA transfer, could be inactivated by heat treatment of the cells prior to electroporation. SIGNIFICANCE AND IMPACT OF THE STUDY: The generation of large combinatorial protein libraries, displayed on the surface of S. carnosus can be envisioned in the near future, thus dramatically improving the selection compared with the traditional biopanning procedure used in phage display.     

High efficiency electroporation of intact Corynebacterium glutamicum cells

High-frequency electroporation of whole Corynebacterium glutamicum cells without enzymatic pretreatment was achieved. Under optimized conditions concerning growth stage, washing of cells, cell concentration and pulse parameter transformation efficiencies of far more than 10(7) transformants per microgram pWST4B plasmid DNA were reached. Using electroporation, linearised and subsequently religated plasmid as well as chimeric ligase reaction products were directly introduced into C. glutamicum with reasonable efficiencies. Electrotransformation efficiency was reduced about 10(5)-fold for plasmid DNA cycled through E. coli JM83. Restriction deficient mutants of C. glutamicum were isolated which could be efficiently transformed with foreign DNA.     

High-efficiency transformation of Listeria monocytogenes by electroporation of penicillin-treated cells

A procedure has been developed for electroporation-mediated transformation of Listeria monocytogenes with plasmid DNA. The method was optimized for intact cells of L. monocytogenes 23074 by determining the effects of field strength, cell density, and plasmid DNA topology. Transformation efficiencies were dramatically increased when cells were treated with penicillin. Optimum frequencies of transformation (4 x 10(6) transformants/microgram DNA) were obtained when cells were grown in 10 micrograms/ml of penicillin G and electroporated at a field strength of 10 kV/cm. Using this procedure, transformation of relaxed plasmid DNA from ligation reactions provided 1 x 10(4) transformants/microgram DNA, allowing direct molecular cloning of DNA into this organism.     

Genetic transformation of various species of Enterococcus by electroporation

A transformation system for Enterococcus faecalis was developed which uses untreated (i.e., non-protoplasted) cells and the electroporation technique. The optimized protocol resulted in transformation efficiencies of up to 4 x 10(6) transformants per microgram of plasmid DNA. All strains of E. faecalis tested could be transformed by this method, albeit with differing transformation efficiencies. Using the protocol optimized for E. faecalis we successfully transformed Enterococcus faecium, E. hirae, E. malodoratus and E. mundtii.     

Conjugative transfer of a shuttle plasmid for Escherichia coli to Mycobacterium smegmatis

Plasmid DNAs were introduced by electroporation into Bacillus subtilis PB1424 as an alternative to competent-cell or protoplast transformation. The maximum electroporation efficiency was 10(4) transformants/microgram DNA. Parameters including growth phase of cells, ionic strength of the suspending medium, concentration and size of plasmid DNAs, amplitude and duration of the pulse, were evaluated in order to determine conditions that improved transformation efficiency.     

Factors involved in the electroporation-induced transformation of Clostridium perfringens

The following factors were found to improve the efficiency of transformation of Clostridium perfringens 3624A Rifr Strr: (1) a reduction in cuvette sample volume (DNA and cell suspension) to 0.8 ml, (2) use of a 1 microgram/ml concentration of transforming DNA, (3) use of late-logarithmic phase cells, (4) 3-fold concentration of cell density (3.0 x 10(8) CFU/ml), and (5) a reduction in the pH of the expression and selective plating medium to 6.4. Application of the improved conditions resulted in transformation efficiencies for C. perfringens 3624A Rifr Strr ranging from 7.1 transformants/microgram DNA for plasmic pIP401 to 9.2 x 10(4) transformants per microgram DNA for plasmid pAK201. The greatest transformation efficiency obtained using pAK201 was 9.8 x 10(6) transformants/micrograms DNA for C. perfringens strain 13. Using the improved protocol, pAM beta 1 was transformed at a 42-fold greater level when compared with the values reported earlier [1]. In addition to C. perfringens 3624A Rifr Strr, strains 13, 10543A, 3628C, NTG-4, and 3624A were successfully transformed. Nuclease does not appear to be a factor in the C. perfringens strain-specific electro-transformation protocol.     

Isolation and characterization of a mildly thermophilic nonsulfur purple bacterium containing bacteriochlorophyll b

A method for transformation of whole Bacillus amyloliquefaciens cells by electroporation was developed. The procedure is as efficient as the protoplast transformation method, resulting in up to 10(5) transformants/micrograms plasmid DNA, but requires less effort and time. Cells for electroporation were grown to late exponential phase in a rich medium supplemented with 0.25 M sucrose, washed with and resuspended in 0.25 M sucrose, 1 mM HEPES, 1 mM MgCl2, 10% (v/v) glycerol, pH 7.0, at 3-5 x 10(10) cells/ml for storage at -80 degrees C. The highest transformation frequency was obtained at 7.5 kV/cm with a 25 microF capacitor. The transformation efficiency increased linearly with DNA concentration at least over the range 10 ng-12.5 micrograms/ml. Transformations with ligated DNA and of industrial strains were also successful. In addition, B. subtilis cells treated as above could be transformed by electroporation, resulting in 10(4) transformants/micrograms DNA at 12.5 kV/cm.     

Optimal conditions for genetic transformation of the cyanobacterium Anacystis nidulans R2

Under optimal conditions, the cyanobacterium Anacystis nidulans R2 was transformed to ampicillin resistance at frequencies of greater than 10(7) transformants per microgram of plasmid (pCH1) donor DNA. No stringent period of competency was detected, and high frequencies of transformation were achieved with cultures at various growth stages. Transformation increased with time after addition of donor DNA up to 15 to 18 h. The peak of transformation efficiency (transformants/donor molecule) occurred at plasmid concentrations of 125 to 325 ng/ml with an ampicillin resistance donor plasmid (pCH1) and 300 to 625 ng/ml for chloramphenicol resistance conferred by plasmid pSG111. The efficiency of transformation was enhanced by excluding light during the incubation or by blocking photosynthesis with the electron transport inhibitor 3-(3, 4-dichlorophenyl)-1, 1-dimethylurea (DCMU) or the uncoupler carbonyl cyanide-m-chlorophenyl hydrazone. Preincubation of cells in darkness for 15 to 18 h before addition of donor DNA significantly decreased transformation efficiency. Growth of cells in iron-deficient medium before transformation enhanced efficiency fourfold. These results were obtained with selection for ampicillin (pCH1 donor plasmid)- or chloramphenicol (pSG111 donor plasmid)-resistant transformants. Approximately 1,000 transformants per microgram were obtained when chromosomal DNA from an herbicide (DCMU)-resistant mutant was used as donor DNA. DCMU resistance was also transferred to recipient cells by using restriction fragments of chromosomal DNA from DCMU-resistant mutants. This procedure allowed size classes of fragments to be assayed for the presence of the DCMU resistance gene.     

Introduction of the transposon Tn919 into Lactobacillus curvatus Lc2-c

Frequencies of greater than 10(5) transformants per microgram DNA were achieved in Bacteroides ruminicola F101 by electroporation of cells under anaerobic conditions, using the 19.5 kbp tetracycline resistance plasmid pRRI4. Similar procedures gave frequences of 10(6) erythromycin resistant transformants per microgram DNA with the shuttle plasmid pDP1 (19 kbp) in Bacteroides uniformis. Transformation of B. uniformis occurred at a far lower frequency (10(3) micrograms) when pDP1 DNA was derived from E. coli rather than B. uniformis.     

Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus.

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Optimization of technical conditions for the transformation of Lactobacillus acidophilus strains by electroporation

AIMS: To optimize the conditions for electroporating foreign plasmid DNA into Lactobacillus acidophilus ATCC 43121. METHODS AND RESULTS: The conditions of electroporation were optimized to improve the transformation efficiency. Plasmid pNZ123 containing multicloning site and chloramphenicol resistance was employed to construct a cloning vector. The optimum electroporation conditions for the maximum transformation efficiency were a pulse strength of 12.5 kV cm(-1), a pulse number of 10, a pulse interval of 500 ms, and pNZ123 plasmid DNA concentration of 25 ng microl(-1). Under the optimum conditions the transformation efficiency of L. acidophilus ATCC 43121 was 1.84 +/- 0.13 x 10(4) (+/- standard error of measurements) CFU per mug of plasmid DNA. Other strains of L. acidophilus showed transformation efficiencies ranging from 1.38 +/- 0.02 x 10(4) to 9.32 +/- 0.54 x 10(4) under these conditions. A green fluorescent protein (GFP) was successfully expressed and detected by fluorescence microscopy when the pKU::slpA-GFP, pNZ123 containing GFP gene, was transformed in L. acidophilus ATCC 43121 under the optimum conditions. CONCLUSIONS: The results suggest that electrical parameters, antibiotic concentration, and host specificity play important roles to determine transformation efficiency of lactobacilli. The optimum conditions for the transformation of L. acidophilus ATCC 43121 may be applied to improve transformation efficiency of other lactobacilli. SIGNIFICANCE AND IMPACT OF THE STUDY: The optimized conditions for electrotransformation may provide a mean to improve the introduction of foreign DNA into L. acidophilus to be used as a vehicle for a heterologous protein expression.     

Protoplast transformation of Bacillus stearothermophilus NUB36 by plasmid DNA

An efficient protoplast transformation system was established for Bacillus stearothermophilus NUB3621 using thermophilic plasmid pTHT15 Tcr (4.5 kb) and mesophilic plasmid pLW05 Cmr (3 kb), a spontaneous deletion derivative of pPL401 Cmr Kmr. The efficiency of transformation of NUB3621 with pLW05 and pTHT15 was 2 x 10(7) to 4 x 10(8) transformants per micrograms DNA. The transformation frequency (transformants per regenerant) was 0.5 to 1.0. Chloramphenicol-resistant and tetracycline-resistant transformants were obtained when competent cells of Bacillus subtilis were transformed with pLW05 [2.5 x 10(5) transformants (microgram DNA)-1] and pTHT15 [1.8 x 10(5) transformants (micrograms DNA)-1], respectively. Thus, these plasmids are shuttle vectors for mesophilic and thermophilic bacilli. Plasmid pLW05 Cmr was not stably maintained in cultures growing at temperatures between 50 and 65 degrees C but the thermostable chloramphenicol acetyltransferase was active in vivo at temperatures up to 70 degrees C. In contrast, thermophilic plasmid pTHT15 Tcr was stable in cultures growing at temperatures up to 60 degrees C but the tetracycline resistance protein was relatively thermolabile at higher temperatures. The estimated copy number of pLW05 in cells of NUB3621 growing at 50, 60, and 65 degrees C was 69, 18, and 1 per chromosome equivalent, respectively. The estimated copy number of pTHT15 in cells of NUB3621 growing at 50 or 60 degrees C was about 41 to 45 per chromosome equivalent and 12 in cells growing at 65 degrees C.