共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
3.
4.
5.
AMESim与Matlab/Simulink联合仿真接口技术应用研究 总被引:2,自引:0,他引:2
分析了机械液压系统建模仿真软件AMESim与专业计算软件Matlab/Simulink联合仿真研究方法的特点与实现方法。对AMESim与Matlab/Simulink联合仿真接口技术进行了详细介绍,并以实例分析了其在应用中的特点和一些实践操作中的主要注意事项。 相似文献
6.
挖掘机器人虚拟样机的机电液一体化建模与仿真 总被引:4,自引:0,他引:4
以挖掘机机器人虚拟样机模型的实现为例,介绍了在多种环境下对挖掘机进行建模与联合仿真的实现策略.在分析机械系统动力学分析软件 ADAMS 和工程仿真软件 MATLAB 的特点的基础上,提出了在 ADAMS 中建立虚拟样机环境,利用 MATLAB 软件中的 Simulink 工具箱建立了参数化和模块化的挖掘机液压系统和控制系统仿真模型,研究了两种软件之间的接口技术,实现机械、液压、控制子系统的有机集成,并进行了机电液一体化的仿真研究. 相似文献
7.
结合风电转盘轴承实际工况下的受载情况,为验证所设计液压加载系统的可行性和改善系统的动态响应性能,设计出风电回转支承实验台液压加载系统。在AMESim中建立液压加载回路的仿真模型,所采用的BP神经网络PID控制器以S函数的形式导入到Simulink中的系统模型中,进行AMESim和MATLAB/Simulink联合仿真研究,并与传统PID控制的同一系统进行AMESim仿真对比。仿真结果表明,所采用的液压加载系统能够模拟出风电转盘轴承实际工况下承受到的载荷,BP神经网络PID控制改善液压加载系统的响应性能。 相似文献
8.
针对正铲挖掘机液压系统与工作装置负载的性能匹配问题,提出了多学科协同仿真方法,并应用于整机系统的性能仿真研究。为准确模拟挖掘机工作过程中各子系统的性能参数变化,基于多刚体动力学软件ADAMS建立了工作装置的机构仿真模型,并利用离散元仿真软件EDEM模拟了挖掘机不同进给深度的实际挖掘负载;然后,根据液压系统原理及控制方式,以AMESim为主仿真平台,建立了复合控制泵模型;最后,构建了全系统机液协同仿真模型。分别对液压系统工作过程中液压泵和各液压缸的性能参数进行了仿真验证,并模拟了不同挖掘负载对液压系统性能参数的影响变化。研究结果表明,该协同仿真方法能够用于对复杂系统进行准确、有效地建模,并验证了所设计的液压系统在多变负载工况下性能匹配参数的合理性。 相似文献
9.
10.
11.
根据广州市珠江新城旅客自动运输系统(APM)列车的运行特点,介绍APM列车制动系统的制动方式及其特点,分析APM列车动态制动和摩擦制动的工作机理及其区别和联系,阐明APM列车制动系统的电控制过程和气控制过程,从而为APM列车制动系统的维护和管理提供一定的依据. 相似文献
12.
13.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
14.
15.
依据JJG880-2006浊度计检定规程,介绍了浊度计示值误差测量结果不确定度的评定方法,对配制标准溶液所使用的玻璃量器所引入的不确定度分量进行了分析和评定。 相似文献
16.
所谓现代化的电梯是指电梯无论在结构上还是在特性、功能上都要满足人们对电梯提出的越来越高的要求 ,这其中包括①电梯的结构———采用先进的制造工艺及控制技术 ,使电梯的结构越来越紧凑、精巧、坚固、美观及实用 ;②电梯的运行性能———采用先进的自动控制理论、先进的传动与控制技术 ,使电梯在运行过程中具有安全可靠、快速、准确、平稳的特性 ,即使电梯具有良好的乘坐舒适感。而电梯运行过程中的振动 ,则是影响电梯乘坐舒适感的“痼疾”之一 ,影响电梯运行振动的因素很多 ,其中一个因素就是隔振垫的设计。本文将以某大厦一部电梯为例… 相似文献
17.
《Mechanism and Machine Theory》1991,26(7):697-709
A method of determining polyhedrons of positioning accuracy of mechanical manipulators is developed. Practical significance of the method is illustrated by numerical examples. Polyhedrons of positioning accuracy for a manipulator of 6-R type are calculated for several positions. 相似文献
18.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
19.
A new method of decomposition of the interval of the values of random variables based on results of optimization of the nonparametric estimate of the probability density of the Rosenblatt-Parzen type is proposed. Its application in the problem of testing the hypothesis of identity of the distribution laws of two sequences of one-dimensional random variables is considered. 相似文献