共查询到18条相似文献,搜索用时 140 毫秒
1.
为满足STL与Parasolid几何建模核心之间数据直接交换的需要,提出在对三角网格模型数据分割的基础上,利用角点对三角网格曲面边界进行分段,以各边界段的近似中点和递归细分算法提取边界段上的特征点,采用Dijkstra算法计算对应边界段上对应特征点之间的最短路径线以获得空间四角形的节点数据,通过Parasolid函数以插值的方式重构三角网格模型的自由曲面并进行曲面缝合,最终将STL数据转换成Parasolid数据。应用实例表明了所生成模型的稳定性与可靠性。 相似文献
2.
3.
4.
快速成型制造中分层算法的改进 总被引:1,自引:0,他引:1
在现有STL模型切片算法的基础之上,提出了一种基于STL模型坐标分层算法,该算法在读入STL模型时,据各三角面片顶点的Z坐标对其分层,然后据三角面片内部边、顶点之间的拓扑关系在层内进行求交,生成CLI片层文件,输入快速成型机.该算法优化了数据结构,减少了切片时间,提高了切片效率. 相似文献
5.
6.
7.
8.
针对3D打印中模型数据的截面轮廓求取问题,分析STL文件的计算机数据格式特征,提出面向STL文件的截面轮廓线段连接算法.首先,通过STL文件的相交面片选取与求交计算,直接生成相交截面的轮廓线段;然后,通过轮廓线段的连接判断,快速生成模型数据的截面轮廓;最后,借助PythonOCC的开源三维模型显示平台,使用Python的计算机编程语言编程开发面向STL文件的截面轮廓生成模块,并通过多个模型的数据测试对所提算法的有效性给予验证.实验结果表明,所提算法可完全避免模型数据的拓扑数据操作,并通过STL文件的直接数据处理,直接实现3D打印中模型数据截面轮廓的快速生成. 相似文献
9.
针对STL文件在传递复杂几何实体模型信息方面具有精度较高的特点,提出了一种基于STL文件变密度三维全六面体网格自动生成方法,给出了STL文件的数据格式及其内容约定,详细阐述了基于STL文件空间CAE模型表面特征自动识别、拓扑关系的生成和变密度栅格法加密信息场的建立等关键技术。实现了在实体模型表面曲率较大和厚度较小的局部区域进行协调加密,可以获得与实体模型边界吻合良好的全六面体协调网格,适合于工程问题的有限元分析计算。若干复杂实体模型算例表明,该算法实用性强,效果良好。 相似文献
10.
基于STereoLithography (STL)三维模型文件,使用八叉树数据结构对模型进行拓扑重建,根据STL模型三角面片法向量夹角不同,找到任意三角面片设定该法向量为基准法向量设定阈值角度将在阈值角度内的三角面片划分成同一部分,最终完整模型被划分成多个子区域,再将子区域投影到基准法向量垂直的平面上得到平面点集,然后使用八叉树讲这些点集进行存储,使用Delaunay三角形法将得到的点集进行平面网格划分,最终使用朴素反映射法将画好的平面网格投影到模型表面。 相似文献
11.
12.
S.-H. Huang L.-C. Zhang M. Han 《The International Journal of Advanced Manufacturing Technology》2002,20(5):363-367
Although the STL (stereo lithography) file format is the de facto standard for the rapid prototyping industries, there are
always some defects in STL files, many of which are difficult to correct. Instead of correcting the defects of bad STL files
by a manual, interactive and complex approach with an STL file correction program, an error-tolerance slicing algorithm for
STL files is proposed in this paper. With the detailed analysis of complex defects such as cracks and non-manifold facets,
a complete topological structure for the facets model with defects is built and the layer is sliced effectively. The badly
sliced contour is processed by crack-tracking and non-manifold facet travelling methods to obtain a correct contour in a relatively
easy 2D way. 相似文献
13.
大多数快速原型制造系统采用 STL 文件作为与 CAD系统之间的数据交换接口。但是 ,STL 文件是通过用一系列的三角片逼近实际零件表面而产生的 ,STL 文件本身及其创建过程均存在许多问题。要提高模型的精度 ,就必须增加三角片的数量 ,同时减小三角片的尺寸。这必然造成 STL 文件庞大 ,后续处理时间较长 ,而且易产生缺陷 ,使后续处理不能进行。针对上述问题 ,本文分析了 STL文件的不足 ,提出一种 CAD系统与 RPM系统之间新的数据交换方法。该方法对 CAD系统中的真实模型直接切片 ,将切片后所得到的轮廓数据作为 CAD系统与快速原型制造系统之间的数据交换接口。该切片算法已在“超人 2 0 0 0 CAD/ CAM”系统中实现 ,算法表现稳定 相似文献
14.
15.
S. Boralingiah C. K. Chua T. Ong S. M. Chou 《The International Journal of Advanced Manufacturing Technology》1999,15(2):119-126
This paper presents the technique used for converting a 3D ArtCAM™ relief file into the stereolithography (STL) format. This
3D file is obtained from a 2D picture using a 3D CNC engraving software called ArtCAM™.
The problem is to convert the 3D relief files into an STL format without compromising the accuracy and details of therelief.
This paper discusses the size of the files which have been converted, and steps taken to reduce the file size by reducing
the number of triangles or facets in the STL file. The discussion involves the verification of the converted model by comparing
it with the original relief. The problems associated with the reduction of triangles when the file has been converted to STL
format are also discussed. 相似文献
16.
WU Peining TAN Jianrong LIU Zhenyu State Key Laboratory of CAD&CG Zhejiang University Hangzhou China 《机械工程学报(英文版)》2007,20(2):6-12
Adaptive layered Cartesian cut cell method is presented to solve the difficulty of the unstructured hexahedral anisotropic Cartesian grids generation from the complex CAD model. Vertex merging algorithm based on relaxed AVL tree is investigated to construct topological structure for stereo lithography (STL) files,and a topology-based self-adaptive layered slicing algorithm with special features control strategy is brought forward. With the help of convex hull,a new points-in-polygon method is employed to improve the Cartesian cut cell method. By integrating the self-adaptive layered slicing algorithm and the improved Cartesian cut cell method,the adaptive layered Cartesian cut cell method gains the volume data of the complex CAD model in STL file and generates the unstructured hexahedral anisotropic Cartesian grids. 相似文献
17.