基于概率因果模型与遗传算法的船舶核动力装置故障诊断的新方法

介绍一种将概率因果模型和遗传算法相结合的核动力装置二回路凝给水系统的故障诊断方法,它将概率因果模型的似然函数作为遗传算法的适应函数,从而将复杂系统的故障诊断转化为最优问题。仿真结果表明,该方法能够适应诊断过程中出现的不确定性,并实现多故障诊断,具有较高的诊断可靠性和实用性。     

BP－RBF神经网络在核电厂故障诊断中的应用

本工作将BP（backpropagation）神经网络与RBF（radialbasisfunction）神经网络相混合,并将其应用于核电厂的状态监测与故障诊断系统中,通过对核电厂典型故障的特征分析,建立相应的网络结构。为验证该混合网络的有效性,在核动力装置模拟器上进行了仿真实验研究,并用VisualBasic6.0编写了网络程序。研究结果表明：该混合网络具有良好的诊断准确性、实时性和可扩充性。     

压水堆核电厂二回路ETA水化学处理研究

秦山核电厂320 MW核电机组使用乙醇胺(ETA)替换氨作为二回路系统p H调节剂后,在给水p H相同的条件下,汽-水分离再热器(MSR)疏水、蒸汽发生器(SG)排污水的p H明显升高;汽-水两相中水相区域设备的腐蚀产物铁含量明显降低,流动加速腐蚀得到抑制,有效改善二回路系统的腐蚀状况;腐蚀产物向蒸汽发生器二次侧的转移得以降低;同时进一步提高凝水混床的周期制水量,减少了凝水混床树脂的再生次数及再生酸、碱的用量和耗水量,从而减轻运行人员的工作负担和再生废液对环境的污染。     

核电厂智能诊断方法研究的进展

文章评述神经网络、模糊逻辑和专家系统3种典型的智能方法在核电厂(NPP)运行状态监测和故障诊断中的应用研究进展.分析了基于神经网络(ANN)、模糊逻辑和专家系统的核电厂运行状态监测和故障诊断方法的研究状况及其特点.探索了核电厂智能诊断方法应用研究的发展趋势.分析表明:基于模糊逻辑和专家系统的核电厂智能诊断方法的研究成果相对较少;核电厂智能诊断方法研究主要集中在基于神经网络的状态监测与故障诊断方面;多种智能诊断方法的结合、神经网络与其它方法的结合,以及基于多神经网络的核电厂运行状态监测和故障诊断方法研究是核电厂智能诊断方法研究的重要发展趋势.     

卡利纳循环在核电厂二回路系统的应用探讨

在朗肯循环的基础上,介绍了卡利纳循环的特点和优势,简述了卡利纳循环在国外的发展概况,从理论上重点分析和阐述了卡利纳循环应用于核电厂二回路系统的可行性.结论表明,应用卡利纳循环可以提高核电厂热效率10%以上,并将显著减少循环冷却水系统和回热、再热系统的投资成本.但是,核电厂二回路工质的改变将改变热力系统,将牵涉到整个热力系统设备的重新研究开发.卡利纳循环是否能够应用于核电厂二回路系统还有待进一步的研究探讨.     

除氧器水位控制的人-机接口设计研究

基于人因工程（HFE）的设计原则，以核电厂二回路主给水除氧器系统为例进行性能需求分析，得到不同层次的静态功能数据库，确定了主给水除氧器系统运行所需的基本信息流及其处理要求。为应对核电厂冷态启动、低负荷和高负荷工况下的操作要求，通过建立给水加热和除氧功能（F01）模块图和运行模式表，明确与控制室有关的功能因素。基于功能分配原则对除氧器水位控制进行研究，实现水位控制的无扰动过渡方案，通过了人-机接口设计验证，为国内开展HFE分析研究提供借鉴。      

基于RELAP5的核动力装置故障诊断数据源研究

为解决故障状态下的核动力装置数据源问题,本文建立了核动力装置一、二回路系统的模型,选择秦山一期核电站为对象,利用RELAP5对蒸汽发生器U型管破裂进行计算.通过结果分析可知所建立的模型节点划分是合理的、数据卡编制准确,基于该模型产生的数据可信.将开发的数据与基于神经网络的故障诊断系统联调,诊断测试结果表明数据准确、充分,可以为核动力装置的故障诊断系统的研究提供数据支持.     

AP1000主给水管道断裂事故中PRHR系统冷却能力分析

使用机理性分析程序建立包括主冷却剂系统、专设安全设施及相关二回路管道的AP1000核电厂模型,对AP1000核电厂主给水管道断裂事故进程进行计算分析。着重分析了非能动余热排出（PRHR）系统在主给水管道断裂事故工况中的瞬态响应、热工水力行为及其冷却能力,并针对PRHR系统流道阻力特性的不确定性对冷却能力的影响进行分析。分析结果表明,在主给水管道断裂事故中,PRHR系统的热移出功率最终能够与堆芯的衰变功率相匹配,有能力带走衰变热,保证一回路系统最终处于安全停堆状态,不发生堆芯损伤,当PRHR系统阻力系数增加时,PRHR系统的流量和换热功率会降低,对PRHR系统冷却能力造成影响。     

美浜核电厂2号机组发生泄漏

【日本关西电力公司网站2003年5月21日报道】 日本关西电力公司美浜核电厂2号机组(压水堆,额定电功率为500 MW,额定热功率为1456 MW)在以额定热功率运行的过程中,二回路给水系统B系统利用第5高压给水加热器(为加热送入蒸汽发生器的二回路冷却水而设置的U形管热交换器。它是通过高压汽轮机排出的蒸汽加热传热管内流动的二回路冷却水的装置。完成加热工作的蒸汽变成冷凝水,回到给水系统。)的冷凝水流量出现了微增的倾向。于是,工作人员从5月8日开始加强了对各种相关参数的监控,发现冷凝水流量微增的倾向仍在继续,因此断定故障的最大可能是…     

AP1000核电厂主给水管道断裂事故瞬态特性分析

AP1000是目前国际上典型的“三代”非能动核电厂,基于最佳估算程序RELAP5/MOD3.3,对AP1000核电厂系统进行了详细的建模分析,获得了主给水管道断裂事故下AP1000核电厂关键参数的瞬态特性和非能动系统响应特性。结果表明,事故过程中一、二回路的压力和温度呈现波动变化,一回路压力最大值为17.13 MPa,低于设计压力的91%,主蒸汽系统的压力也低于设计值的91%,满足验收准则的要求。     

Identification of radiation treatment of wheat （Triticum aestivum. L）and rice （Oryza sativa. L） samples using thermoluminescence of contaminating minerals

Food irradiation is gaining popularity worldwide and this technology is important to improve quality and reduce the post harvest losses of food. Because of the rapid commercialization of irradiated foods throughout the world, compliance of different regulations relating to use of technology in different countries and demand of consumers for clear labelling of irradiated foods, there is need for the development of analytical methods to detect radiation treatment of food. Among several methods studied so far, thermoluminescence （TL） is an important method that can be used to find out the irradiation history of food that contain even a very minute amount of dust particles. In this study, the irradiated and unirradiated wheat and rice samples were analyzed using the TL method. The samples were purchased from the local market of Peshawar and irradiated to radiation doses of 0.5 and 1.0 kGy using Co-60 gamma irradiator at the Nuclear Institute for Food and Agriculture （NIFA）, Peshawar. The mineral contaminants were isolated by jet water, ultrasonic treatment, and density gradient. TL glow curves of the isolated minerals from irradiated and unirradiated samples were recorded between the temperature ranges of 50-500℃ using a TL reader. Generally, the glow curves for irradiated samples showed much higher TL intensities （TL1） than the unirradiated samples. The results were normalized by rerradiation of mineral samples to gamma-ray dose of 1.0 kGy followed by determination of the second glow curves （TL2）. The ratio of the area of first glow curve to that of second glow curve （TL1/TL2） was calculated for selected temperature intervals and compared with the recommended values for unirradiated and irradiated samples. Finally, the shapes of the glow curves for irradiated and unirradiated samples were also analyzed. On the basis of these results （comparison of TL-intensities, TL1/TL2 ratios and shapes of the glow curves）, all the irradiated and unirradiated samples of wheat and rice were unequivocally identified.     

The preclinical pharmacological study of dopamine transporter imaging agent 18F-FP-β-CIT

The paper is to study pharmacologic characteristics of 18F-FP-β-CIT (18F-N-(3-fluoropropyl)-2β- carbomethoxy-3β- (4-iodophenyl)nortropane) as an imaging agent for dopamine transporter. The radiochemical purity of 18F-FP-β-CIT in aqueous solution was over 95% after standing at room temperature for 4h. Biodistribution displayed rapid uptake in rat brain (1.375 %ID/organ at 5min and 0.100 %ID/organ at 180 min) and the striatal uptake was 1.444,0.731, 0.397, 0.230 and 0.146 %ID/g at 5, 30, 60, 120 and 180 min, respectively. The values of striatum/cerebellum,striatum/frontal cortex and striatum / hippocampus in rat's brain at 30 min were 3.38, 2.17 and 2.40 respectively. The uptake in striatum can be blocked by β-CFT, suggesting that 18F-FP-β-CIT binds to DAT peculiarly. The compound was rapidly cleared from monkey's blood. The striatal uptake was bilaterally decreased in the left-sided lesioned PD rats, compared with normal control. Brain PET imaging studies in normal monkey showed that 18F-FP-β-CIT was concentrated in striatum. The test of undue toxicity showed that the dose received by mice was 1250 times as by human, which indicates that 18F-FP-β-CIT is very safe. So 18F-FP-β-CIT is a promising PET imaging agent for DAT with safety and validity.     

PLASMA SCIENCE AND TECHNOLOGY AUTHOR INDEX TO VOLUME 16(2014)

正~~     

Radioactivity levels in soil of salt field area,Kelambakkam,Tamilnadu,India

Soil samples in and around salt field area have been analyzed for natural radioactivity concentration using gamma ray spectrometer.The activity concentration for ~(232)Th,~(238)U and ~(40)K are ranged from 27.88 to 45.27 Bq/kg, from BDL to 13.30 Bq/kg,and from 135.54 to 381.28 Bq/kg,respectively.The measured activity concentrations for these radionuclides were compared with world average activity of soil.The average activity concentration of ~(232)Th in the present study is 1.19 times higher than world median value while the activity of ~(238)U and ~(40)K is found to be lower. The absorbed dose rates due to these radionuclides were calculated.The average absorbed gamma dose rate due to the presence of ~(232)Th,~(238)U and ~(40)K in soil samples is 36.99 nGy·h~(-1).These results indicate no radiological anomaly. The data presented in this study will serve as a base line survey for primordial radionuclides concentration in the study area.     

Non-FDG PET imaging of brain tumors

Due to relatively high uptake of glucose in the brain cortex, the use of FDG PET imaging is greatly limited in brain tumor imaging, especially for low-grade gliomas and some metastatic tumours. More and more tracers with higher specificity were developed lately for brain tumor imaging. There are 3 main types of non-FDG PET tracers： amino acid tracers, choline tracers and nucleic acid tracers. These tracers are now widely applied in many aspects of brain tumor imaging. This article summarized the general use of non-FDG PET in different aspects of brain tumor imaging.     

基于NPL-NMC系统的γ测量子系统的建模与优化

在军控核查中,核部件的质量、丰度、年龄属性需采用无损方法进行核查,NPL-NMC系统是一套利用中子多重性测量核部件质量属性的装置,为建立完善的属性测量系统,还需在NPL-NMC系统的基础上建立γ测量子系统。本文通过设计γ测量子系统在NPL-NMC系统上的布局及对中子屏蔽的优化,使系统能对铀部件的丰度、年龄属性进行测量。模拟计算结果表明,该γ测量子系统能很好地满足军控核查对铀部件丰度、年龄属性测量的要求。     

Improvement of carbon fiber surface properties using electron beam irradiation

Carbon fiber-reinforced advance composites have been used for structural applications,mainly on account of their mechanical properties.The main factor for a good mechanical performance of carbon fiber-reinforced com- posite is the interfacial interaction between its components,which are carbon fiber and polymeric matrix.The aim of this study is to improve the surface properties of the carbon fiber using ionizing radiation from an electron beam to obtain better adhesion properties in the resultant composite.EB radiation was applied on the carbon fiber itself before preparing test specimens for the mechanical tests.Experimental results showed that EB irradiation improved the ten- sile strength of carbon fiber samples.The maximum value in tensile strength was reached using doses of about 250 kGy.After breakage,the morphology aspect of the tensile specimens prepared with irradiated and non-irradiated car- bon fibers were evaluated.SEM micrographs showed modifications on the carbon fiber surface.     

Measurement system for SSRF pulsed magnets

This paper describes the magnetic field measurement system for pulsed magnets in SSRF.The system consists of magnetic probes,analog active integrator,oscilloscope,stepper motor and a controller.An application pro- gram based on LabVIEW has been developed as main control unit.After the magnetic field mapping of a septum magnet prototype,it is verified that the test results accord with the results of theoretical calculation and computer simulation.     

旁路阀调节对高温气冷堆闭式布雷顿循环瞬态特性影响研究

闭式布雷顿循环是第4代高温堆核能系统的关键技术之一,其典型的动态过程是旁路阀调节。为分析这一过程,建立了循环中关键部件的动态模型,其中压气机在径向平衡模型基础上耦合了对附面层发展的预测,兼顾了计算效率与准确性;换热部件模型基于双曲型守恒律方程,对工质的热物性和参数的快速变化有较好的适应性。在此基础上根据回路的质量守恒和压力平衡原则将各部件的模型耦合,建立了系统的动态模型。由于旁路阀调节是氦气透平发电系统主要的功率快速调节手段,瞬态效应较为显著,以模块式高温气冷堆（HTR-10GT）旁路阀开启后的过渡过程作为算例,分析了主要循环参数的响应特性,并通过分析,给出了降低输出功率的机制。计算结果表明：系统的容积惯性对旁路阀调节的响应速度影响较大,而阀门的开度则决定了系统在末态的输出功率;回热器的温度冲击现象可能发生在调节过程中,但可通过两旁路阀联动的方式缓解;反应堆出口温度变化幅度很小,因此反应堆模型的准确程度对结果基本无影响。     

CEFR 100%额定功率运行汽轮机发电能力分析

中国实验快堆(CEFR)首次100%额定功率发电运行中,实际电功率较设计值相差较多。为判断影响机组实际发电能力的主要原因,以现场采集的运行数据和汽轮机厂商提供的设计资料为基础,进行了相应的计算分析。对汽轮机内效率进行修正,绘制汽轮机近似热力过程曲线,并通过实测的各段抽汽压力,在热力过程曲线上获得抽汽焓值;利用换热器的能量守恒和流量守恒的基本方程进行除氧器和各加热器的热平衡计算,获得各段抽汽的流量;利用汽轮机的功率计算方程,得到汽轮机发电功率的计算值。通过计算值与实际值的比较分析,得出主蒸汽参数不达标是影响CEFR汽轮机发电能力的主要因素。