共查询到20条相似文献,搜索用时 70 毫秒
1.
一种有潜力的吸附式制冷工作对——活性炭纤维—甲醇 总被引:10,自引:0,他引:10
吸附式制冷具有无CFCs问题、可利用低品位热能驱动、价格效用比高等一系列优点。由于一般吸附剂吸附/解吸时间长和单位质量制冷功率小使吸附式制冷的产品化受阻。活性炭纤维是一般吸附剂活性炭的较好替代物,其对甲醇的吸附容量为活性炭的2-3倍,而吸附/解吸时间仅为活性炭的1/10左右。对紧凑式吸附式冰箱,活性炭纤维-甲醇是一种好的工作对。 相似文献
2.
3.
4.
活性炭吸附式制冷机吸附剂再活化节能工艺研究上海交通大学制冷工程研究所陈江平1前言随着CFCs问题的日益成为热点,全球环境保护和节能意识的增强,固体吸附式制冷由于其在太阳能等低温热源制冷和空调方面应用具有的广阔前景,引起国内外学者的广泛关注并已取得很大... 相似文献
5.
6.
7.
螺旋板式吸附器的应用及连续回热型吸附式制冷循环的实现 总被引:6,自引:0,他引:6
吸附式制冷系统中一有的各种吸附器在应用过程中都存在一些缺点。我们设计了一种螺旋板式吸附器,并将其成功地应用在采用活性碳-甲醇为工质对的连续回热型吸附式制冷系统中。实验中该吸附器显示了良好的性能,可以使循环周期大大缩短。通过对建造的连续回热型吸附式制冷系统性能的测试分析,指出了原有连续回热型吸附式制冷系统的弊端,着重讨论了实现连续回热型循环的有效途径。 相似文献
8.
对吸附式制冷/热泵循环理论的分析 总被引:11,自引:2,他引:11
以D-R方程为依据,在热力分析的基础上对吸附-解吸过程作了比较准确的描述,给出的模型中,重新考虑了D-R方程中各参数的物理意义,并充分考虑了工质对热物质性如比热容,潜热等随温度变化的影响,基于该模型分析了几种重要因素如工质对的性质,循环工况,循环特性,尤其是吸附器的热容对吸附式制冷/热泵系数性能的影响,为系统的优化设计和优化运行提供了理论上的参考。 相似文献
9.
以常规客车空调系统作为研究对象,设计出一种以活性炭-甲醇为工质对的加热吸附式客车空调系统。其工作原理是:以汽车尾气余热作为制冷能量的来源,利用某些固体(吸附剂)能在低温下吸附气体,而在高温下解吸,从而进行制冷,降低车内温度。这样既不降低客车动力,工质对对环境又无污染,能够达到实现节约能源、保护环境的目的。 相似文献
10.
11.
太阳能热动力发电系统吸热器换热管试验及数值模拟 总被引:4,自引:0,他引:4
吸热器换热管地面试验是空间太阳能热动力发电系统吸热/蓄热器研制的重要阶段,是为了验证相变材料的蓄放热性能。对以共晶盐LiF—CaF2为蓄热介质的换热管进行了27个周期共2511分钟的地面试验,包括变参数试验和稳态试验,获得了容器表面温度和工质出口温度等试验结果。利用焓法建立相变蓄热换热管试验的传热模型,采用试验参数对地面试验进行了数值模拟,得到的结果与试验结果进行了比较,两者比较接近。证明了地面单管试验的成功性,也验证了换热管传热分析软件的可靠性。 相似文献
12.
13.
14.
提出了一种复合热源太阳能热泵供热系统,通过阀门切换,可根据不同的天气状况改变运行模式,以空气和太阳辐射作为热源制取供暖用水。针对所设计的10kW供热系统,建立了系统的数学模型,对热泵串联集热器(SC+HP)及集热器串联热泵(H+SC)两种运行模式下的循环性能进行了计算机模拟分析,并计算了系统的全年运行状况。从模拟结果可以看出,在模拟进水温度区间内,HP+SC模式下热泵COP较高,最高比SC+HP模式高2.58%;而SC+HP模式集热器热性能较好,总热效率更高,最高比HP+SC模式高2.62%。 相似文献
15.
16.
Abstract It is proposed that researchers in the numerical heat transfer community need to realize the trend of the information highway and agree to use a protocol or a module that constitutes the core of a computer program solving heat transfer problems. This will avoid duplicate programming and accelerate the technology advancement of numerical heat transfer. The module for two-dimensional incompressible Navier-Stokes flows is presented and explained. It is further demonstrated that, using this module as the foundation, the user can straightforwardly build up an entire personal computer code by inputting the data, specifying boundary conditions, and outputting the result. Other modules for slightly more compicated problems, such as transient flows with variable viscosity in irregular geometries, are also presented. Other than zoning matches for problems with multizones, the programming task for a user becomes minimal and simple: input, prescribe the boundary conditions, and output. The availability of Navier-Stokes modules is particularly helpful for less experienced numerical researchers, newcomers, and graduate students who have just entered the area of heat transfer and fluid flows. 相似文献
17.
18.
J. R. Barber 《热应力杂志》2013,36(1):69-78
An analysis is given for radial heat flow through the wall of a duplex heat exchanger tube with a pressure or gap-dependent contact resistance at the interface. Thermal expansion of the tube changes the value of this resistance, and it is shown that for certain thermal conditions there will be more than one steady-state solution. The stability of these multiple solutions is then investigated using a perturbation method, and it is found that there is always an odd number of solutions, alternately stable and unstable. This kind of behavior has been observed in other thermoelastic contact problems, but this is the first example in which it has been exhibited in a case of contact between similar materials. 相似文献
19.