共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
电网电压波动时,变频器保护跳闸,使高压煤浆泵跳车,导致气化炉停炉,制约生产装置的长周期稳定运行。通过设置直流支撑装置和抗晃电接触器,在系统电压波动时起到了保护作用,保证了高压煤浆泵的稳定运行。 相似文献
3.
高压变频器过电压保护与控制 总被引:1,自引:0,他引:1
《中国石油和化工标准与质量》2017,(22):134-135
经济发展和社会进步对电力资源的需求越来越大,因此,高压输电线路以及相关的供电设备的使用越来越多。其中高压变频器是高压输电线路中的关键设备之一,高圧变频器的保护工作也是电力设备保护工作的重要内容。而电子技术的发展和创新,使中性点箱位三电平高压变频器的拓扑结构被人们逐渐重视,对其研究也在不断深入。但是随着高压变频器的不断运用,电子器件的承压问题也逐渐受到人们关注,因此,加强对变频器的过电压保护研究,并对高压变频器的控制方式进行进一步探索研究对高压变频器的发展有一定的促进意义。 相似文献
4.
1问题表现我公司高温风机配套高压电动机型号为YR630,额定电压10kV,额定功率900kW;高压电动机采用高压变频器控制,高压变频器型号为HIVERT-Y10/077。高温风机因故停机若立刻再启动,高压变频器经常跳闸,频繁尝试启动的结果,造成高压真空断路器触头烧蚀严重,只能采取措施先使风机完全停下来再正常启动。 相似文献
5.
高压变频器的节能不仅仅是节省能耗,还包括不浪费能源。高压变频器分“交-交”变频和“交-直-交”变频两大类。作为应用主流的“高-高”方式的高压变频调速系统在应用中应重视电压等级和整流方案的选择,在设计中应尽可能设置单独的变频器并进行散热防尘处理。 相似文献
6.
据了解,水泥生产企业对高压设备进行高压无功补偿时一般采用人工投切电容器组的技术方案,即需整定电压时由值班人员手动投切。这种投切方式始终存在无功测量不准,更为严重的是常因人为因素导致投切迟缓,造成过补或欠补,进而引发设备故障。我公司针对上述情况研发了GWK-Z型高压无功自动调节成套装置,形成了一套成熟的高压无功补偿的自动化控制方案。1工作原理GWK-Z型高压无功自动调节成套装置由电压无功自动控制柜、高压真空开关、高压电容器组、电抗器、避雷器、隔离开关、放电线圈和一些附属设备组成。具有高可靠性的控制器按… 相似文献
7.
8.
高压起动设备在水泥行业被广泛用于磨机及大容量风机的起、停控制,拖动高压电动机为6kV或10kV。一般情况下,高压起动设备设计完善对高压电动机及机械设备起到了保护作用。但是,在实际使用中由于高压元件本身或其它因素常导致起动设备发生短路爆炸事故或其它爆炸事故。1设备简介高压起动设备在保护回路一般采用低电压和过电流保护,在主回路上采用高压熔断器进行相间或接地短路保护,使用真空断路器通断高压电源,高压隔离开关进行高压电源隔离,使用电流互感器和电压互感器采 集监视、保护数据。近年来的产品,为了更好地保护高压… 相似文献
9.
10.
本文将高压变频器调速与传统调速方式的耗能进行比较分析,证明高压变频器调速节电效果显著.对选用高压变频器有很好的推广价值。 相似文献
11.
12.
13.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
14.
15.
我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉 相似文献
16.
The objective of the study was to explore the effect of the degree of deacetylation (DD) of the chitosan used on the degradation rate and rate constant during ultrasonic degradation. Chitin was extracted from red shrimp process waste. Four different DD chitosans were prepared from chitin by alkali deacetylation. Those chitosans were degraded by ultrasonic radiation to different molecular weights. Changes of the molecular weight were determined by light scattering, and data of molecular weight changes were used to calculate the degradation rate and rate constant. The results were as follows: The molecular weight of chitosans decreased with an increasing ultrasonication time. The curves of the molecular weight versus the ultrasonication time were broken at 1‐h treatment. The degradation rate and rate constant of sonolysis decreased with an increasing ultrasonication time. This may be because the chances of being attacked by the cavitation energy increased with an increasing molecular weight species and may be because smaller molecular weight species have shorter relaxation times and, thus, can alleviate the sonication stress easier. However, the degradation rate and rate constant of sonolysis increased with an increasing DD of the chitosan used. This may be because the flexibilitier molecules of higher DD chitosans are more susceptible to the shear force of elongation flow generated by the cavitation field or due to the bond energy difference of acetamido and β‐1,4‐glucoside linkage or hydrogen bonds. Breakage of the β‐1,4‐glucoside linkage will result in lower molecular weight and an increasing reaction rate and rate constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3526–3531, 2003 相似文献
17.
18.
Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969. 相似文献
19.
20.
A refined nonlinear value of the main parameter of a material, i.e., the elongation modulus versus the instant temperature value, was suggested for introduction into the computational algorithm of tempering stresses. 相似文献