共查询到20条相似文献,搜索用时 515 毫秒
1.
2.
利用酸浸法生产氧化铝,需要对浸出液进行除铁处理。铝铁分离问题是阻碍酸法生产氧化铝工艺成功迈向工业化进程的一项重大难题。如果这一问题得到解决,就能缓解中国适合于碱法生产氧化铝的铝土矿日益减少的困境。介绍了近几年酸法生产氧化铝过程中铁离子去除方法的研究进展,并对将来铁离子去除方法的发展前景进行了展望。指出,目前酸法生产氧化铝工艺中除铁的方法有很多,但是均存在一定的局限性。磁化焙烧法、沉淀法等,虽然工艺简单、生产成本不高,但是除铁效果不理想;萃取法、重结晶法等,虽然除铁效果较好,但是工艺流程比较复杂、生产成本较高,难以实现工业化;树脂吸附法,因具有操作简单、经济有效并且可以实现循环利用等特点,发展前景十分广阔。 相似文献
3.
铟是一种重要的多用途战略金属,具有较高的工业应用价值,无独立可供开采的矿床,常伴生于铅锌等硫化矿中,主金属冶炼时富集于各类冶炼废渣中,使铟的回收存在工艺复杂、回收率低的问题。本文从铟精矿的制备开始,较为全面地综述了处理含铟冶炼废渣常用的冶金工艺及技术,重点分析总结了冶炼废渣铟浸出技术进展。根据处理手段的不同,渣中铟的回收技术分为直接酸浸法和预处理后浸出法等,其中直接酸浸包括常规酸浸法、热酸浸出法和氧化酸浸法,预处理浸出又可分为酸法预处理和碱法预处理两大类;而强化浸铟的最新研究及方法以物理法为主。传统的常规酸浸易于工业化,但铟回收率低,原料适应性差。热酸浸出环保问题严重。氧化酸浸和预处理后浸出,通过氧化或多种预处理强化浸铟,优势明显。新的实验室研究集中于酸浸协同多种物理强化浸铟效应,取得了较大进展。因此,未来需着力于研究酸浸联合多种强化方法,探索低成本、高效、环保的铟回收工艺。 相似文献
4.
5.
6.
采用微波固相法酸浸提取煤矸石中的铁、铝,对煤矸石原料、酸浸物和酸浸渣的化学组成、物相组成及微观形貌进行了分析,利用ChemOffice软件对煤矸石原料及酸浸未溶物所含化合物分子的三维结构及分子间键长进行模拟. 结果表明,在微波辅助酸浸条件下,煤矸石中铁、铝组分浸取率分别达98.13%和95.07%,酸浸未溶物中铁、铝组分分别为FeH(SO4)2×2H2O, FeSO3, Al2SO4(OH)4×5H2O和AlH(SO4)2×2H2O. 微波固相法的酸浸反应机理与传统加热机理不同. 相似文献
7.
制备硫酸锰溶液,目前国内有几种生产方法,其中以菱锰矿或焙烧一氧化锰用酸溶浸的方法为主,还有“两矿法”、二氧化硫吸收法等,各有特点,各地都根据具体的情况而采用不同的方法。对于硫酸锰溶液用于电解二氧化锰来说,几种方法都有一定的缺点,如二氧化硫吸收法在除连二硫酸盐和过滤方面带来较复杂的工艺过程;两矿法所生产的硫酸锰溶液,虽然质量优良,但提供电解后所产生的母液(即电解废液),其含Mn 量低,含铁和含酸量偏高,按酸法工艺,必须返回溶浸工段参与焙烧锰粉和硫酸一起溶浸,从而制得含锰量、含铁量符合电解的 相似文献
8.
为实现准东煤灰的绿色化综合利用,笔者研究设计了从准东煤灰中制取氧化铝和白炭黑的工艺流程,确定了最佳工艺条件,并通过SPSS双变量分析比较不同影响因素对提取率影响程度。试验采用准东煤--将军庙原煤,破碎并用马弗炉模拟煤粉炉静态燃烧方式制取灰样。准东煤灰的成分分析和元素分析表明:SiO2占48.84%,Al2O3占31.26%。参照标准制备灰样,对灰样进行SEM分析,发现粘黏性严重,因此试验前先进行机械研磨。采用煤灰与硫酸铵焙烧法制备氧化铝,工艺分为焙烧过程和酸浸过程。因滤液中含有大量杂质铁、钙等元素,采用pH调节法除杂并对除杂效果进行检验,检验结果为除杂率接近100%。从提铝渣中制备白炭黑分为碱浸过程和多次碳分过程。在提铝工艺焙烧过程中,通过提铝率变化曲线及节能角度确定了各因素的最佳试验条件为:焙烧温度600℃,焙烧时间60 min,焙烧配料比1∶6;在提铝工艺酸浸过程中,得到最佳试验条件为:酸浸温度60℃、酸浸时间20 min、H2SO4浓度0.2 mol/L、酸浸液固比50。从提铝渣制备白炭黑研究中,通过SEM观察到提铝渣疏松多孔,有利于进一步的提硅试验。通过XRD对提铝渣分析,得出提铝渣中含有大量硅、钙元素;用K值法(RIR法)求得提铝渣中Si含量及经提铝后的Si损失率为7.64%。得出碱浸过程最佳试验条件为:碱浸温度60℃、碱浸时间30 min、碱浸NaOH浓度3 mol/L、碱浸液固比70,此时Si提取率为99%。采用多次碳分法进行提硅能够满足不同硅含量纯度要求,得到最佳碱浸工艺条件为碳分pH=9.5、CO2通气速率24 m L/min、碳分NaOH浓度0.2 mol/L、碳分液固比80。通过双变量相关性分析,得到各因素对提铝率、SiO2提取率及H2SiO3沉淀率影响程度大小分别为:焙烧温度>焙烧时间>焙烧配料比,酸浸时间>酸浸温度>H2SO4浓度>酸浸液固比,碱浸液固比>碱浸温度>NaOH浓度>碱浸时间,碳分pH>碳分液固比>碳分NaOH浓度>CO2通气速率。通过经济性及可行性分析,说明提出的工艺能有效实现准东煤灰的绿色化综合利用。从提铝后的滤液中重新提取(NH4)2SO4,实现生产原料的再利用;碳分过程后的Na2CO3溶液可通过加入石灰苛化的方式实现NaOH可循环利用于提取工艺生产;本工艺除生产氧化铝和白炭黑外,还能获得Na2SO4等附加产品。 相似文献
9.
10.
氨浸法从含砷粗氧化锌制活性氧化锌研究 总被引:4,自引:2,他引:2
在碱性氨浸法处理含有砷、铅的低级氧化锌制取活性氧化锌的工艺中,引入铁盐除砷方法,解决了氨浸法生产活性氧化锌中除砷的问题,对于含砷1%~2%的原料,产品中的砷含量可降低至0.0005以下,本方法还为含砷的铜、镍、钴废料的利用提供了参考途径。 相似文献
11.
12.
The transport properties of ionic liquids (ILs) are crucial properties in view of their applications in electrochem-ical devices. One of the most important advantages of ILs is that their chemical–physical properties and conse-quently their bulk performances can be well tuned by optimizing the chemical structures of their ions. This will require elucidating the structural features of the ions that fundamentally determine the characteristics of the nanostructures and the viscosities of ILs. Here we showed for the first time that the“rigidity”, the order, and the compactness of the three-dimensional ionic networks generated by the anions and the cation head groups determine the formation and the sizes of the nanostructures in the apolar domains of ILs. We also found that the properties of ionic networks are governed by the conformational flexibility and the symmetry of the anion and/or the cation head group. The thermal stability of the nanostructures of ILs was shown to be con-trolled by the sensitivity of the conformational equilibrium of the anion to the change of temperature. We showed that the viscosity of ILs is strongly related to the symmetry and the flexibility of the constitute ions rather than to the size of the nanostructures of ILs. Therefore, the characteristics of the nanostructures and the viscosities of ILs, especially the thermal stability of the nanostructures, can be fine-tuned by tailoring the symmetry and the conformational flexibility of the anion. 相似文献
13.
14.
Investigation of the effects of fatty acids on the compressive strength of the concrete and the grindability of the cement 总被引:1,自引:0,他引:1
In cement industry, a great energy consumption has been observed during grinding of clinker. To reduce this consumption, some waste products have been used as grinding aids.In this investigation, the effects of sunflower oil (SO), oleic acid (OA), stearic acid (SA), myristic acid (MA) and lauric acid (LA) on the fineness and strength of the cement have been examined. These aids were added into clinker in certain ratios based on the cement clinker weight and the grinding has been done for a definite time at the same condition.All of the fatty acids used increased the fineness as compared with the cement without the grinding additives. SO and OA decreased the strength significantly, LA decreased it to a lesser extent and SA increased it definitely according to the common cement. But MA did not alter the strength of the cement as much as SA. In addition, the covering of the balls influences the grinding of cement clinker unfavourably. 相似文献
15.
16.
17.
18.
19.
In spinning basalt fibres, the drafting force is in the same range as in spinning of glass fibres. The effect of the drafting
force can not be considered in the calculation for the strength and rigidity of the bottom of the spinneret.
__________
Translated from Khimicheskie Volokna, No. 5, pp. 47–50, September–October, 2007. 相似文献