底座连接口特征参数对显示器后壳注塑质量的影响分析

在Moldflow分析软件的基础上,对显示器后壳进行仿真研究,以翘曲变形量为质量指标,结合控制变量法进行单因素变动实验,保持注射工艺参数不变,研究显示器后壳底座连接口对制品翘曲变形的影响。对数据进行图表分析,结果表明显示器后壳尺寸定位68.58 cm(27英寸)时,底座连接口选用圆形,连接口位置距离底边26 mm,尺寸为直径21 mm的时候模具翘曲表现更好。     

Effect of the drafting force on the strength of the bottom of the spinneret

In spinning basalt fibres, the drafting force is in the same range as in spinning of glass fibres. The effect of the drafting force can not be considered in the calculation for the strength and rigidity of the bottom of the spinneret. __________ Translated from Khimicheskie Volokna, No. 5, pp. 47–50, September–October, 2007.     

The role of the symmetry and the flexibility of the anion on the characteristics of the nanostructures and the viscosities of ionic liquids☆

The transport properties of ionic liquids (ILs) are crucial properties in view of their applications in electrochem-ical devices. One of the most important advantages of ILs is that their chemical–physical properties and conse-quently their bulk performances can be well tuned by optimizing the chemical structures of their ions. This will require elucidating the structural features of the ions that fundamentally determine the characteristics of the nanostructures and the viscosities of ILs. Here we showed for the first time that the“rigidity”, the order, and the compactness of the three-dimensional ionic networks generated by the anions and the cation head groups determine the formation and the sizes of the nanostructures in the apolar domains of ILs. We also found that the properties of ionic networks are governed by the conformational flexibility and the symmetry of the anion and/or the cation head group. The thermal stability of the nanostructures of ILs was shown to be con-trolled by the sensitivity of the conformational equilibrium of the anion to the change of temperature. We showed that the viscosity of ILs is strongly related to the symmetry and the flexibility of the constitute ions rather than to the size of the nanostructures of ILs. Therefore, the characteristics of the nanostructures and the viscosities of ILs, especially the thermal stability of the nanostructures, can be fine-tuned by tailoring the symmetry and the conformational flexibility of the anion.     

紫苏糖废渣再生与废气处理工艺和设备研究

详细介绍了紫苏糖生产过程中硒粉的生成、特点、再生利用的工艺流程及设备要求,同时介绍了其再生过程中产生的废气处理方法及设备要求。     

Investigation of the effects of fatty acids on the compressive strength of the concrete and the grindability of the cement

In cement industry, a great energy consumption has been observed during grinding of clinker. To reduce this consumption, some waste products have been used as grinding aids.In this investigation, the effects of sunflower oil (SO), oleic acid (OA), stearic acid (SA), myristic acid (MA) and lauric acid (LA) on the fineness and strength of the cement have been examined. These aids were added into clinker in certain ratios based on the cement clinker weight and the grinding has been done for a definite time at the same condition.All of the fatty acids used increased the fineness as compared with the cement without the grinding additives. SO and OA decreased the strength significantly, LA decreased it to a lesser extent and SA increased it definitely according to the common cement. But MA did not alter the strength of the cement as much as SA. In addition, the covering of the balls influences the grinding of cement clinker unfavourably.     

浅谈设备的性能与操作对胎面压出质量的影响

简要介绍了胎面压出的工作原理及工艺过程，对设备的配置及操作对胎面压出质量的影响进行了分析，并对压出过程中常见的质量缺陷、造成的原因以及解决措施提出了自己的见解。     

Meeting the plenum of the Central Committee of the CPSU

Refractories and Industrial Ceramics -