Methanol decomposition to synthesis gas at low temperature over palladium supported on ceria–zirconia solid solutions

The Ce_xZr_1−xO₂ solid solution was used as a support of a palladium catalyst for methanol decomposition to synthesis gas at low temperature. All Pd-containing catalysts tested in this study showed high selectivity to synthesis gas (over 96%). The Pd supported on the composite oxide with a Ce/Zr molar ratio of 4/1 exhibited the highest activity. Pd/Ce_0.8Zr_0.2O₂ (17 wt.%) (cop) (prepared by coprecipitation method) showed a conversion of 51.2% for the methanol decomposition at 473 K, which was higher than those over 17 wt.% Pd/CeO₂ (cop) (40.7%) and 17 wt.% Pd/ZrO₂ (cop) (24.3%) at 473 K. The 17 wt.% Pd/Ce_0.8Zr_0.2O₂ (cop) catalyst showed a higher BET surface area and smaller Pd particles than those of 17 wt.% Pd/CeO₂ (cop). Moreover, a more active Pd^σ+ state could be maintained by Zr⁴⁺ ion modification due to promotion of the oxygen mobility and enhancement of the reductibility and increase in the acid sites of the CeO₂ support. The 17 wt.% Pd/Ce_0.8Zr_0.2O₂ (cop) catalyst showed a much higher conversion (51.2%) than that over 17 wt.% Pd/Ce_0.8Zr_0.2O₂ (imp) (prepared by impregnation method) (17.2%) at 473 K. This is due to the 17 wt.% Pd/Ce_0.8Zr_0.2O₂ (cop) possessing many small Pd particles. The 17 wt.% Pd/Ce_0.8Zr_0.2O₂ (cop) catalyst showed an initial conversion of 51.2% at 473 K but the conversion decreased to 43.1% after 24 h on stream. This deactivation was attributed to carbonaceous deposit on the catalyst surface. The amounts of coke on the 17 wt.% Pd/Ce_0.8Zr_0.2O₂ (cop) catalyst were 0.9 wt.% after 24 h on stream at 473 K and 2.1 wt.% after 1 h on stream at 523 K.     

Preparation and characterization of Ir-based catalysts on metallic supports for high-temperature steam reforming of methanol

Ir-based catalysts on heat-resisting foil supports with different washcoats were investigated for hydrogen production by high-temperature steam reforming of methanol. Al₂O₃, Ce_0.8Zr_0.2O₂–Al₂O₃, Ce_0.8Zr_0.2O₂/Al₂O₃ and Ce_0.8Zr_0.2O₂ coatings were prepared on the metallic supports and iridium was deposited on them as the active component. The samples were characterized by X-ray powder diffraction (XRD), ultrasonic vibration test, scanning electron microscope (SEM) and temperature-programmed reduction (TPR). The performance of the catalysts for steam reforming of methanol was evaluated with a fixed-bed reactor. It was found that the phase structure, the shape of the surface particles and the coating adherence were different from each other for the four kinds of coatings. The activities, selectivities and stabilities of these Ir-based catalysts on metallic supports were compared to select the optimal one for use in high-temperature methanol steam reforming. The results indicated that the Ir/Ce_0.8Zr_0.2O₂/Al₂O₃/FeCrAl catalyst showed better performance than the other catalysts, which is a promising candidate for hydrogen production via the methanol steam reforming process in Pd membrane reactors.     

铈锆固溶体担载的镍催化剂对CO2甲烷化性能研究

采用共沉淀法制备了Ce_xZr_1-xO₂固溶体作为催化剂载体，采用柠檬酸络合法将镍负载于Ce_xZr_1-xO₂载体上得到Ni/Ce_xZr_1-xO₂催化剂，利用X射线衍射（XRD）、N₂吸附-脱附（N₂-BET）、程序升温脱附（TPD）、程序升温还原（TPR）等技术对催化剂进行表征，在常压微型固定床反应器上测试了CO₂甲烷化的性能，考察了n（Ce）/n（Zr）、镍含量对催化性能的影响。研究发现制备的催化剂具有优异的活性，在常压和空速15 000 mL·g^-1·h^-1条件下，反应温度200℃时，12% Ni/Ce_0.25Zr_0.75O₂催化剂（负载量为质量分数，下同）CO₂的转化率达74%，CH₄选择性为100%。12% Ni/Ce_0.25Zr_0.75O₂催化剂300 h的稳定性测试结果显示其具有较高的抗烧结性能。催化剂的优异活性归因于采用了新的负载方法--柠檬酸络合法负载活性组分镍，该法实现了镍的高分散和催化剂的大的比表面积。     

Hydrocarbon synthesis through CO2 hydrogenation over CuZnOZrO2/zeolite hybrid catalysts

Direct syntheses of hydrocarbons from CO₂ hydrogenation were investigated over hybrid catalysts consisting of methanol synthesis catalyst (CuZnOZrO₂) and zeolites (MFI and SAPO). The yield of hydrocarbons was strongly depending upon the amount of zeolite's acid sites as measured by NH₃ TPD, while the product distributions were hardly affected by the change of acidity. The main product was ethane in the case of MFI hybrid catalyst and C₃ or C₄ hydrocarbon in the case of SAPO hybrid catalyst. This difference in product distribution was attributed to different mechanism of hydrocarbon formation. Investigation based on the ethene co-reaction suggested that the consecutive mechanism operated for HZSM-5 and the carbon pool mechanism for SAPO.     

Co/Al_2O_3催化剂制备及其合成重质烃的反应性能

以不同孔道结构Al_2O_3作载体,甲醇、乙醇和柠檬酸作分散剂,通过等体积浸渍法制备系列Co/Al_2O_3费托合成催化剂。采用XRD、TG-DSC和H2-TPR等考察制备方法对催化剂结构的影响,并在固定床反应器中对催化剂进行性能评价。结果表明,采用具有适宜孔道结构Al_2O_3作载体才能获得综合性能较好的催化剂,3种分散剂的加入,促进了钴物种在载体上的分散,增强了钴与载体间的相互作用,改善了催化剂费托合成反应活性,显著提高了重质烃时空收率。     

Partial oxidation and combined reforming of methane on Ce-promoted catalysts

Pt/ZrO₂ and Pt/Ce_0.14Zr_0.86O₂ catalysts containing 0.5 and 1.5 wt.% Pt were studied in order to evaluate the effect of the support reducibility and metal dispersion on the catalyst stability for the partial oxidation and the combined partial oxidation and CO₂ reforming of methane. The Pt/Ce_0.14Zr_0.86O₂ catalysts proved to be more active, stable and selective than Pt/ZrO₂ catalysts during the partial oxidation reaction. No increase in deactivation was observed when the CH₄:O₂ feed ratio was increased from 2:1 to 4:1. In addition, no water formation was observed at the high CH₄:O₂ ratios. The activity of the catalyst is dependent upon both the dispersion and the ability of the catalyst to resist carbon deposition.

The addition of CO₂ resulted in a decrease in the methane conversion and a decrease in the H₂/CO ratio for the Ce_0.14Zr_0.86O₂ and ZrO₂ supported catalysts. Small increases in the temperature of the bed have been recorded during the partial oxidation reaction. However, within a few minutes the temperature stabilizes below the furnace temperature providing indirect evidence for the combined combustion and reforming mechanisms previously proposed. The 1.5 wt.% Pt/CeZrO₂ catalyst shows promise for the autothermal reforming reaction based on the stability during transient operation.     

Direct synthesis of middle iso-paraffins from synthesis gas on hybrid catalysts

This paper focuses on the synthesis of iso-paraffin-rich hydrocarbons by Fischer–Tropsch synthesis (FTS) over silica gel supported Co catalyst (Co/SiO₂). The basic concept is to isomerize and/or hydrocrack the primary FTS hydrocarbon products. A physical mixture consisting of a small amount of zeolite or Pd/zeolite mixed with Co/SiO₂ enhanced the formation of C₄–C₁₀ iso-paraffins while suppressing the formation of higher molecular hydrocarbons, probably because of the selective cracking of these hydrocarbons on them. In separate experiments, a two-reactor system was used. The first reactor contained a physical mixture of Co/SiO₂ and zeolite, and the second reactor contained zeolites or Pd-supported zeolites. The two-reactor system gave sharp C-number distribution within C₃–C₆ and iso-paraffins-rich products. The hydrocracking of n-octane and n-decane (model compound simulating products of the FTS reaction) over mixed catalysts composed of various compositions of Pd/SiO₂ and ZSM-5 in the presence of gaseous hydrogen showed high and stable activity, and produced primarily iso-paraffin-rich hydrocarbons. The isomerization was favored for mixtures rich in Pd/SiO₂. The role of Pd was thought to be the inlet of hydrogen spillover to the zeolite surface.     

稀土镧添加氧化锆的合成与物相分析研究

以硝酸锆、硝酸镧和柠檬酸为原料,原位合成了稀土镧（La）掺杂氧化锆（ZrO₂）和锆酸镧/氧化锆（La₂Zr₂O₇/ZrO₂）复合材料。采用X射线衍射（XRD）和拉曼光谱（Raman）作为分析和表征手段,研究了稀土La掺杂ZrO₂和La₂Zr₂O₇/ZrO₂复合材料的物相组成以及La₂Zr₂O₇/ZrO₂复合材料的高温热稳定性。研究结果表明：稀土La很难进入ZrO₂晶格形成固溶体,当稀土La掺杂量较少时,生成以m-ZrO₂为主相的m-ZrO₂和La₂Zr₂O₇的复合材料;当稀土La掺杂量较大时,生成以La₂Zr₂O₇为主相的t-ZrO₂和La₂Zr₂O₇的复合材料。在1 400 ℃煅烧6 h条件下,LZZ11（按La₂Zr₂O₇与ZrO₂物质的量比为1∶[KG-*2]1称取原料制备的样品）中的t-ZrO₂转变为m-ZrO₂相,此时La₂Zr₂O₇失去了对ZrO₂的稳定作用。     

Preparation of CexZr1−xO2 (x = 0.75, 0.62) solid solution and its application in Pd-only three-way catalysts

Nanoparticles of Ce_xZr_1−xO₂ (x = 0.75, 0.62) were prepared by the oxidation-coprecipitation method using H₂O₂ as an oxidant, and characterized by N₂ adsorption, XRD and H₂-TPR. Ce_xZr_1−xO₂ prepared had single fluorite cubic structure, good thermal stability and reduction property. With the increasing of Ce/Zr ratio, the surface area of Ce_xZr_1−xO₂ increased, but thermal stability of Ce_xZr_1−xO₂ decreased. The surface area of Ce_0.62Zr_0.38O₂ was 41.2 m²/g after calcination in air at 900 °C for 6 h. TPR results showed the formation of solid solution promoted the reduction of CeO₂, and the reduction properties of Ce_xZr_1−xO₂ were enhanced by the cycle of TPR-reoxidation. The Pd-only three-way catalysts (TWC) were prepared by the impregnation method, in which Ce_0.75Zr_0.25O₂ was used as the active washcoat and Pd loading was 0.7 g/L. In the test of Air/Fuel, the conversion of C₃H₈ was close to 100% and NO was completely converted at λ < 1.025. The high conversion of C₃H₈ was induced by the steam reform and dissociation adsorption reaction of C₃H₈. Pd-only catalyst using Ce_0.75Zr_0.25O₂ as active washcoat showed high light off activity, the reaction temperatures (T₅₀) of 50% conversion of CO, C₃H₈ and NO were 180, 200 and 205 °C, respectively. However, the conversions of C₃H₈ and NO showed oscillation with continuously increasing the reaction temperature. The presence of La₂O₃ in washcoat decreased the light off activity and suppressed the oscillation of C₃H₈ and NO conversion. After being aged at 900 °C for 4 h, the operation windows of catalysts shifted slightly to rich burn. The presence of La₂O₃ in active washcoat can enhance the thermal stability of catalyst significantly.     

Catalytic reduction of sulfur dioxide using hydrogen or carbon monoxide over Ce1−xZrxO2 catalysts for the recovery of elemental sulfur

This study focuses on the direct sulfur recovery process (DSRP), in which SO₂ can be directly converted into elemental sulfur using a variety of reducing agents over Ce_1−xZr_xO₂ catalysts. Ce_1−xZr_xO₂ catalysts (where x = 0.2, 0.5, and 0.8) were prepared by a citric complexation method. The experimental conditions used for SO₂ reduction were as follow: the space velocity (GHSV) was 30,000 ml/g_-cat h and the ratio of [CO (or H₂, H₂ + CO)]/[SO₂] was 2.0. It was found that the catalyst and reducing agent providing the best performance were the Ce_0.5Zr_0.5O₂ catalyst and CO, respectively. In this case, the SO₂ conversion was about 92% and the sulfur yield was about 90% at 550 °C. Also, a higher efficiency of SO₂ removal and elemental sulfur recovery was achieved in the reduction of SO₂ with CO as a reducing agent than that with H₂. In the reduction of SO₂ by H₂ over the Ce_0.5Zr_0.5O₂ catalyst, SO₂ conversion and sulfur yield were about 92.7% and 73%, respectively, at 800 °C. Also, the reduction of SO₂ using synthetic gas with various [CO]/[H₂] molar ratios over the Ce_0.5Zr_0.5O₂ catalyst was performed, in order to investigate the possibility of using coal-derived gas as a reducing agent in the DSRP. It was found that the reactivity of the SO₂ reduction using the synthetic gas with various [CO]/[H₂] molar ratios was increased with increasing CO content of the synthetic gas. Therefore, it was found that the Ce_1−xZr_xO₂ catalysts are applicable to the DSRP using coal-derived gas, which contains a larger percentage of CO than H₂.     

Ni/Al_2O_3催化剂的CO_2-TPD表征

Ni/Al_2O_3催化剂是甲烷二氧化碳重整反应制取合成气研究最多、最具应用潜力的一种催化剂。通过对催化剂进行CO_2-TPD研究,考察还原态Ni/Al_2O_3催化剂的CO_2脱附特性。结果表明,浸渍法制备的Ni/Al_2O_3催化剂CO_2脱附曲线呈现双峰,分别在(60~65)℃和(350~380)℃出现高低温两个活性位;高温CO_2吸附量为3.0 cm~3·g~(-1),低温CO_2吸附量为24.0 cm~3·g~(-1)。催化剂的CO_2吸附量与其Ni含量无关。考察选用不同载体的CO_2脱附行为,发现以Al_2O_3为载体的催化剂CO_2吸附量是MgO和SiO_2为载体催化剂的2~4倍,以TiO_2为载体的催化剂几乎不吸附CO_2。     

SCR OVER COMPOSITE CATALYSTS

Composite catalysts consisting of a modified Y zeolite (H-Y, Cu-Y, DAY, or Cu-DAY)and V₂O₃ and/or TiOj were synthesized by mixing a modified Y zeolite with n-hexane solutions of ammonium monovanadat and/or isopropyl orthotitanate. Both reflux and impregnation methods wer: used to add Ti02 to the catalysts. It is found that N₂/NO_in over the composite catalysts synthesized by ::eflux method is higher than that by impregnation. In addition, N₂/NO_in increases with oxygen concentration for oxygen concentration less than 2%, while it is independent of oxygen concentration for oxygen concentration greater than 2%. Effect of Ti02 in The catalyst on N₂/NO_in varies depending on the type of :atalysl and the method of synthesis. N₂/NO_in increases with the addition of copper and/or vanadia to composite catalysts. Furthermore, these composite catalysts are S0₂ resistant.     

Pd/Ce0.6Zr0.4O2/Al2O3 as advanced materials for three-way catalysts: Part 1. Catalyst characterisation, thermal stability and catalytic activity in the reduction of NO by CO

Pd-loaded Ce_0.6Zr_0.4O₂ solid solutions supported on Al₂O₃ are investigated as catalysts for the reduction of NO by CO. The attention is focused on the role of the Ce_0.6Zr_0.4O₂ and of the Pd dispersion on the catalytic activity. The system shows a very high activity below 500 K, which is almost independent on the Pd dispersion. The high activity is attributed to a promoting effect of the Ce_0.6Zr_0.4O₂ on the NO conversion. Investigation of the influence of high temperature treatments disclosed a thermal stabilisation of both Ce_0.6Zr_0.4O₂ and Al₂O₃ in the Ce_0.6Zr_0.4O₂/Al₂O₃ system.     

Generation of H2O2 from H2 and O2 over zeolite beta containing Pd and heterogenized organic compounds

The catalytic generation of H₂O₂ from H₂ and O₂ has been studied over zeolite beta-supported Pd and zeolite beta-adsorbed organic compounds such as 1,4-benzoquinone (BQ), hydroquinone (HQ), azobenzene (AB) and hydrazobenzene (HAB). According to catalytic results, zeolite beta-supported Pd catalysts display effective performance relative to those prepared from other types of zeolites reported and Pd-loaded zeolite beta-adsorbed HQ catalysts show enhanced activity compared to zeolite beta-supported Pd catalysts. In situ UV–Vis spectroscopic study indicates that HQ can readily be converted to BQ reversibly under H₂ and air inside zeolite beta only in the presence of Pd. The results suggest that HQ acts as a strong hydrogen transfer agent to promote the production of H₂O₂ from H₂ and O₂ in cooperation with a Pd catalyst. By contrast, adsorption of BQ, AB and HAB induces suppression of the catalytic properties of Pd/zeolite beta.     

CO2加氢一步制二甲醚展望

CO₂加氢制二甲醚（DME）是有潜力实现CO₂资源化利用的重要途径之一。与光、电催化相比,CO₂的非均相催化转化具有转化效率高等优点,但目前CO₂加氢一步制备DME催化剂的反应活性较低、稳定性较差。本文在简要介绍CO₂加氢一步制DME的铜基双功能催化剂、复合氧化物和氮化镓催化剂的基础上,重点总结了活性中心结构和反应机理的研究进展。对于铜基双功能催化剂,CO₂加氢经甲醇中间体合成DME,其中还原态铜（Cu⁰、Cu⁺及Cu ^δ+,0<δ<2）是其催化活性中心,且还原态铜的分散度及稳定性、固体酸的性质和酸性位分布以及两类活性中心的耦合效应是决定DME收率和催化剂稳定性的关键因素。与此相反,DME是氮化镓催化CO₂加氢的初级产物。这与铜基双功能催化剂有着本质区别,属新催化剂体系。在此基础上,文章对CO₂加氢制DME的可能研究方向进行了展望,认为“二甲醚经济”更具发展潜力。     

Comparison of catalytic activity and selectivity of Pd/(OSC + Al2O3) and (Pd + OSC)/Al2O3 catalysts

The effect of the Pd addition method into the fresh Pd/(OSC + Al₂O₃) and (Pd + OSC)/Al₂O₃ catalysts (OSC material = Ce_xZr_1−xO₂ mixed oxides) was investigated in this study. The CO + NO and CO + NO + O₂ model reactions were studied over fresh and aged catalysts. The differences in the fresh catalysts were insignificant compared to the aged catalysts. During the CO + NO reaction, only small differences were observed in the behaviour of the fresh catalysts. The light-off temperature of CO was about 20 °C lower for the fresh Pd/(OSC + Al₂O₃) catalyst than for the fresh (Pd + OSC)/Al₂O₃ catalyst during the CO + NO + O₂ reaction. For the aged catalysts lower NO reduction and CO oxidation activities were observed, as expected. Pd on OSC-containing alumina was more active than Pd on OSC material after the agings. The activity decline is due to a decrease in the number of active sites on the surface, which was observed as a larger Pd particle size for aged catalysts than for fresh catalysts. In addition, the oxygen storage capacity of the aged Pd/(OSC + Al₂O₃) catalyst was higher than that of the (Pd + OSC)/Al₂O₃ catalyst.     

车用三效催化剂剖析

对两种国外公司车用三效催化剂进行全面剖析,采用XRF测定催化剂涂层中各组分含量,采用XRD、XPS、H_2-TPR和TEM对催化剂进行物化性能表征。结果表明,A公司的三效催化剂是将Pd和Rh贵金属分别负载到γ-Al_2O_3和Ce_(0.35)Zr_(0.65)O_2固溶体材料上,B公司的三效催化剂是将Pd和Rh贵金属负载到Ce_(0.35)Zr_(0.65)O_2和γ-Al_2O_3混合载体上。     

Effective synthesis of ethanol from CO2 on polyfunctional composite catalysts

Synthesis of ethanol by hydrogenation of carbon dioxide has been investigated by developing the novel composite catalysts. The three different kinds of elementary reaction functions for ethanol synthesis were undertaken. The catalytic functions are partial reduction of CO₂ to CO, C–C bond formation, and –OH group insertion. For this purpose, supported Rh catalyst, Fe-based modified Fisher–Tropsch catalyst, and Cu-based modified methanol synthesis catalyst were combined by different ways. As a result, high space–time yields of ethanol as high as 0.8–0.9 kg/l h were obtained.     

Hydrogenation of carbon dioxide to methanol over palladium-promoted Cu/ZnO/A12O3 catalysts

The effect of Pd on a Cu/ZnO/A1₂O₃ catalyst for methanol synthesis from CO₂/H₂ has been investigated. Activities of impregnated catalysts and physical mixtures were studied in an internal recycle reactor under 5 MPa, 250°C and a range of conversions. In all cases, the promotion of methanol production was greater at higher flow rates (lower conversions). The promotion achieved by use of Pd/A1₂O₃+ Cu/ZnO/Al₂O₃ physical mixtures was found to increase with Pd content. Greater promotion was observed over the Pd impregnated Cu/ZnO/Al₂O₃ catalysts, although this was insensitive to the particular Pd loadings used. The results are consistent with the proposal that hydrogen spillover is responsible for the observed promotion. The effectiveness of Pd as a promoter for the reduction of CuO in the catalysts was studied by TPR and was found to be related to the level of promotion in methanol production.     

The catalytic activity and surface characterization of Ln2B2O7 (Ln=Sm, Eu, Gd and Tb; B=Ti or Zr) with pyrochlore structure as novel CH4 combustion catalyst

Ln₂B₂O₇ (Ln=Sm, Eu, Gd and Tb; B=Zr or Ti) with pyrochlore structure was prepared by sol–gel method for the high-temperature catalytic combustion. The crystal structure of Ln₂B₂O₇ was identified by XRD and their surface area was about 4 m²/g after calcinations at 1200 °C. Catalytic activity of methane combustion was observed for Ln₂Zr₂O₇ series and the best catalyst was Sm₂Zr₂O₇. Its relative reaction rate per unit surface area at 600 °C was 2 cm³/m² min, which was twice higher than that of Mn-substituted Sr hexaaluminate. From surface analysis by XPS, the low binding energy of each Ln element of Ln₂Zr₂O₇ compared to that of Ln₂Ti₂O₇, gave the catalytic activity of methane combustion.