共查询到20条相似文献,搜索用时 218 毫秒
1.
2.
3.
4.
磷的农业化学(II) 总被引:1,自引:0,他引:1
作物生长需要的养分,主要是依靠土壤和肥料两种来源供给。在中等产量水平时,作物吸收的氮有30%~60%,磷有50%~70%,钾有40%~60%是靠土壤肥力提供。除极少数无土栽培和根外施肥外,化肥主要是通过土壤和作物提供养分,因此,土壤的物理化学性质对施肥效果特别重要。土壤学是介于地球学与生命科学之间的一门独立的自然学科,本文从化肥生产应具备的土壤基础知识出发,只撷取了其中的土壤物理(土壤天相,质地, 相似文献
5.
土壤修复:腐植酸作为天然表面活性剂淋洗高度污染土壤 总被引:1,自引:0,他引:1
修复位于意大利北部的前ACNA化工厂(萨沃纳)附近的高污染场地是意大利的当务之急。文章目的是致力于寻找环境友好型的新技术用于修复ACNA污染场地的土壤。从ACNA场地获取质地和有机污染物数量和类型都不同的两种土壤样本A和B,采用多种洗涤剂对两种土壤样本进行淋洗,比较这些洗涤剂去除土壤污染物的效率。实验采用的洗涤剂包括:水,两种合成表面活性剂:十二烷基硫酸钠(SDS)和Triton X-100(TX100)和腐殖酸(HA)作为临界胶束浓度的天然表面活性剂溶液。在土壤样本淋洗前后分别采用超声处理和索氏法提取污染物。土壤A富含多环芳烃,而土壤B含有大量噻吩。处理细质土壤B时,超声处理具有更高的分析效率,处理粗质土壤A,索氏法的处理效率处于正常水平。采用清水洗涤土壤不能完全从土壤中除去污染物,而用后几种方法除去污染物时,所有有机表面活性剂的效率基本相同(高达90%)。因此,使用含天然腐殖酸的溶液淋洗高度污染的土壤似乎是一个更好的选择,因为含天然腐殖酸的溶液能够促进土壤中微生物的活性,而合成表面活性剂则相反,会使被淋洗过的土壤出现进一步的自然衰减。 相似文献
6.
J.R.GREGORY 《硫酸工业》2001,(4):9-12
在农业生产中,越来越多地采用硫酸改良高pH值的石灰质土壤。过去20年来,尿素--硫酸肥料的产量大幅度提高并在美国西部诸州的土壤中广泛施用。将硫酸注入牛奶场湖泊,改变湖水pH值,可解决圈养牲畜过程产生的若干空气和水质问题。将硫酸施入农用土壤和水中,其主要作用是溶解钙、镁的碳酸盐和碳酸氢盐。这些钙、镁盐然后取代可交换的钠盐,钠盐随后用水浸洗除去。当碳酸盐和碳酸氢盐被分解后,硫酸与更惰性的物质反应,释放出磷、铁等植物养分。简单地降低土壤的pH值可引起许多元素溶解度的变化,提高它们对植物的效力。在高pH值的石灰质土壤上施用硫酸,可使植物更加健壮、收成增加。本文介绍硫酸在农业中的各种应用,在过去的25年里,Verdegaal Brothers公司一直致力于此项研究。 相似文献
7.
8.
9.
土壤熏蒸剂溴甲烷除对几乎所有的土壤病害、线虫、土壤害虫有较高的防效外,对杂草也有相当的效果,并已使用了很长的时间。但自1992年在蒙特利尔协议上,溴甲烷被指定为破坏臭氧层的物质后,要求缔约国逐年削减使用,直至最后禁用。[第一段] 相似文献
10.
11.
我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉 相似文献
12.
13.
14.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
15.
16.
17.
The objective of the study was to explore the effect of the degree of deacetylation (DD) of the chitosan used on the degradation rate and rate constant during ultrasonic degradation. Chitin was extracted from red shrimp process waste. Four different DD chitosans were prepared from chitin by alkali deacetylation. Those chitosans were degraded by ultrasonic radiation to different molecular weights. Changes of the molecular weight were determined by light scattering, and data of molecular weight changes were used to calculate the degradation rate and rate constant. The results were as follows: The molecular weight of chitosans decreased with an increasing ultrasonication time. The curves of the molecular weight versus the ultrasonication time were broken at 1‐h treatment. The degradation rate and rate constant of sonolysis decreased with an increasing ultrasonication time. This may be because the chances of being attacked by the cavitation energy increased with an increasing molecular weight species and may be because smaller molecular weight species have shorter relaxation times and, thus, can alleviate the sonication stress easier. However, the degradation rate and rate constant of sonolysis increased with an increasing DD of the chitosan used. This may be because the flexibilitier molecules of higher DD chitosans are more susceptible to the shear force of elongation flow generated by the cavitation field or due to the bond energy difference of acetamido and β‐1,4‐glucoside linkage or hydrogen bonds. Breakage of the β‐1,4‐glucoside linkage will result in lower molecular weight and an increasing reaction rate and rate constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3526–3531, 2003 相似文献
18.
Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969. 相似文献
19.
20.
A refined nonlinear value of the main parameter of a material, i.e., the elongation modulus versus the instant temperature value, was suggested for introduction into the computational algorithm of tempering stresses. 相似文献