A Novel Energy Efficient and Lifetime Maximization Routing Protocol in Wireless Sensor Networks

The energy consumption is a key design criterion for the routing protocols in wireless sensor networks (WSN). Some of the conventional single path routing schemes may not be optimal to maximize the network lifetime and connectivity. Thus, multipath routing schemes is an optimal alternative to extend the lifetime of WSN. Multipath routing schemes distribute the traffic across multiple paths instead of routing all the traffic along a single path. In this paper, we propose a multipath Energy-Efficient data Routing Protocol for wireless sensor networks (EERP). The latter keeps a set of good paths and chooses one based on the node state and the cost function of this path. In EERP, each node has a number of neighbours through which it can route packets to the base station. A node bases its routing decision on two metrics: state and cost function. It searches its Neighbours Information Table for all its neighbours concerned with minimum cost function. Simulation results show that our EERP protocol minimizes and balances the energy consumption well among all sensor nodes and achieves an obvious improvement on the network lifetime.     

H-SPREAD: a hybrid multipath scheme for secure and reliable data collection in wireless sensor networks

Communication security and reliability are two important issues in any network. A typical communication task in a wireless sensor network is for every sensor node to sense its local environment, and upon request, send data of interest back to a base station (BS). In this paper, a hybrid multipath scheme (H-SPREAD) to improve both the security and reliability of this task in a potentially hostile and unreliable wireless sensor network is proposed. The new scheme is based on a distributed N-to-1 multipath discovery protocol, which is able to find multiple node-disjoint paths from every sensor node to the BS simultaneously in one route discovery process. Then, a hybrid multipath data collection scheme is proposed. On the one hand, end-to-end multipath data dispersion, combined with secret sharing, enhances the security of the end-to-end data delivery in the sense that the compromise of a small number of paths will not result in the compromise of a data message in the face of adversarial nodes. On the other hand, in the face of unreliable wireless links and/or sensor nodes, alternate path routing available at each sensor node improves the reliability of each packet transmission significantly. The extensive simulation results show that the hybrid multipath scheme is very efficient in improving both the security and reliability of the data collection service seamlessly.     

Routing Technology in Wireless Sensor Network Based on Ant Colony Optimization Algorithm

With rapid development of wireless communication, sensor, micro power system and electronic technology, the research on wireless sensor network has attracted more and more attention. The work proposed routing algorithm in wireless sensor network based on ant colony optimization by analyzing routing protocol and utilizing advanced idea. Ant colony optimization algorithm has advantages in implementing local work, supporting multiple paths and integrating link quality into pheromone formation. In routing selection, the work calculated probability that node is selected as the next hop according to pheromone concentration on the path. With characteristics including self-organization, dynamic and multipath, ant colony optimization algorithm is suitable for routing in wireless sensor network. With low routing cost, good adaptability and multipath, the algorithm balanced energy consumption to prolong network lifetime. In terms of simulation and experiments, ant colony algorithm was proved to be suitable for finding optimal routing in wireless sensor network, thus achieving design goal of routing algorithm.     

基于AODV的无线多媒体传感器网络路由协议

研究了AODV路由协议,分析了多路径路由实现机制,提出了一种可应用于无线多媒体传感器网络的能量均衡多路径AODV路由协议。该协议建立从源节点到目的节点的多条路径,在路径的选择上综合考虑了路径跳数和节点剩余能量,用以保证负载均衡,延长网络生存期,该算法使用了分流的方式避免拥塞。通过使用NS2仿真软件对EEMP-AODV路由协议进行仿真,结果显示其在拥塞避免、实时性、吞吐量和网络生存期方面的性能有明显提升。     

Statistical Multipath Queue-Wise Preemption Routing for ZigBee-Based WSN

Nowadays, wireless sensor network (WSN) is an important component in IoT environment, which enables efficient data collection and transmission. Since WSN consists of a large number of sensor nodes, network congestion can easily occur which significantly degrades the performance of entire network. In this paper a novel scheme called SMQP (Statistical Multipath Queue-wise Preemption) routing is proposed to balance the load and avoid the congestion for ZigBee-based WSN. This is achieved by employing statistical path scheduling and queue-wise preemption with multiple paths between any source and destination node. NS2 simulation reveals that the proposed scheme significantly improves the QoS in terms of delivery ratio, end-to-end delay, and packet delivery ratio compared to the representative routing schemes for WSN such as ad hoc on-demand distance vector and ad hoc on-demand multipath distance vector scheme.     

A survey and analysis of multipath routing protocols in wireless multimedia sensor networks

The main objective of this research is to conduct a performance analysis of various multipath routing protocols in wireless multimedia sensor networks for the efficient transmission of the image, audio and video data. To provide efficient routing for the large sized multimedia content, various multipath routing protocols such as energy-aware routing, QoS based routing and geographical routing methods are analyzed. In this analysis, the efficient routing techniques including geographical routing techniques such as GPSR, DGR, PW-DGR presented for wireless multimedia sensor networks are studied and the performance of each technique is evaluated to determine the efficient multipath routing technique. Comparisons are made for evaluated protocols and it is proved that the PW-DGR provides better routing performance for the multimedia data. The findings of the research also show that the PW-DGR method efficiently overcomes the routing problems such as energy bottleneck problem, energy-hole, reduced network lifetime and high delay in packet transmission.     

An adaptive‐aware energy and queue improvement of AOMDV

Because the node energy and network resources in the wireless sensor network (WSN) are very finite, it is necessary to distribute data traffic reasonably and achieve network load balancing. Ad hoc on‐demand multipath distance vector (AOMDV) is a widely used routing protocol in WSN, but it has some deficiencies: establishes the route by only using hop counts as the routing criterion without considering other factors such as energy consumption and network load; forwards route request in fixed delay resulting in building the nonoptimal path; and cannot update the path status after built paths. For the deficiency of AOMDV, this paper proposes a multipath routing protocol adaptive energy and queue AOMDV (AEQAOMDV) based on adaptively sensing node residual energy and buffer queue length. When sending a routing request, the forwarding delay of the routing request is adaptively adjusted by both the residual energy and the queue length of the intermediate node; when establishing routes, a fitness is defined as a routing criterion according to the link energy and the queue load, predicting the available duration of the node based on the energy consumption rate and adjusting the weight of the routing criterion by the available duration of the node; after the routes are established, the path information status are updated via periodically broadcasting Hello that carries the path information with the minimum fitness, making the source node update the path information periodically. By using NS‐2, simulations demonstrate that compared with AOMDV, AEQAOMDV has obvious improvements in increasing packet delivery ratio, reducing network routing overhead, reducing route discovery frequency, and decreasing the network delay. And AEQAOMDV is more suitable for WSN.     

LSAPSP: Load distribution‐based slot allocation and path establishment using optimized substance particle selection in sensor networks

Sensor node energy conservation is the primary design parameters in wireless sensor networks (WSNs). Energy efficiency in sensor networks directly prolongs the network lifetime. In the process of route discovery, each node cooperates to forward the data to the base station using multi‐hop routing. But, the nodes nearer to the base station are loaded more than the other nodes that lead to network portioning, packet loss and delay as a result nodes may completely loss its energy during the routing process. To rectify these issues, path establishment considers optimized substance particle selection, load distribution, and an efficient slot allocation scheme for data transmission between the sensor nodes in this paper. The selection of forwarders and conscious multi‐hop path is selected based on the route cost value that is derived directly by taking energy, node degree and distance as crucial metrics. Load distribution based slot allocation method ensures the balance of data traffic and residual energy of the node in areal‐time environment. The proposed LSAPSP simulation results show that our algorithm not only can balance the real‐time environment load and increase the network lifetime but also meet the needs of packet loss and delay.     

Up-Down Links Dualpath Greedy Routing Protocol for Wireless Sensor Networks

Greedy geographic routing is attractive in wireless sensor networks because of its efficiency and scalability. This paper presents an up-down links dualpath greedy routing (UDLDGR) protocol for wireless sensor networks. The routing protocol not only reserves the features of greedy forwarding algorithm, which is simple, efficient, but also uses different relay nodes to serve as routing nodes for up and down routing paths, makes the energy consumption more balanced. The greatest advantage of UDLDGR is it trades off only small cost for the source node to obtain two different transmission paths information. The multipath strengthens the network reliability, such as load balancing and robustness to failures. Our simulation results show that UDLDGR can improve system lifetime by 20–100% compared to single path approaches.     

基于ERPMT改进启发式方法的WSN寿命最大化算法

针对传感器节点的电池容量限制导致无线传感网络寿命低的问题,基于容量最大化(CMAX)、线上最大化寿命(OML)两种启发式方法以及高效路由能量管理技术(ERPMT),提出了基于ERPMT改进启发式方法的无线传感网络寿命最大化算法。首先,通过启发式方法初始化每个传感器节点,将节点能量划分为传感器节点起源数据和其它节点数据延迟;然后利用加入的一种优先度量延迟一跳节点的能量消耗;最后,根据路径平均能量为每个路由分配一个优先级,并通过ERPMT实现最终的无线传感网络优化。针对不同分布类型网络寿命的实验验证了本文算法的有效性及可靠性,实验结果表明,相比较为先进的启发式方法CMAX及OML,本文算法明显增大了无线传感网络的覆盖范围,并且大大地延长了网络的寿命。     

IM2PR: interference-minimized multipath routing protocol for wireless sensor networks

With respect to the inherent advantages of multipath routing, nowadays multipath routing is known as an efficient mechanism to provide even network resource utilization and efficient data transmission in different networks. In this context, several multipath routing protocols have been developed over the past years. However, due to the time-varying characteristics of low-power wireless communications and broadcast nature of radio channel, performance benefits of traffic distribution over multiple paths in wireless sensor networks are less obvious. Motivated by the drawbacks of the existing multipath routing protocols, this paper presents an Interference-Minimized MultiPath Routing protocol (IM2PR) which aims to discover a sufficient number of minimum interfering paths with high data transmission quality between each event area and sink node in order to provide efficient event data packet forwarding in event-driven wireless sensor networks. Extensive performance evaluations show that IM2PR presents improvements over the Micro Sensor Multipath Routing Protocol and Energy-Efficient data Routing Protocol as follows: 50 and 70 % in term of packet reception ratio at the sink, 44 and 80 % in term of goodput, 33 and 40 % in term of packet delivery latency, 40 and 57 % in term of energy consumption, 50 and 60 % in term of packet delivery overhead.     

无线传感网络中基于蚁群的路由算法

In the wireless sensor networks, high efficient data routing for the limited energy resource networks is an important issue. By introducing Ant-colony algorithm, this paper proposes the wireless sensor network routing algorithm based on LEACH. During the construction of sensor network clusters, to avoid the node premature death because of the energy consumption, only the nodes whose residual energy is higher than the average energy can be chosen as the cluster heads. The method of repeated division is used to divide the clusters in sensor networks so that the numbers of the nodes in each cluster are balanced. The basic thought of ant-colony algorithm is adopted to realize the data routing between the cluster heads and sink nodes, and the maintenance of routing. The analysis and simulation showed that the proposed routing protocol not only can reduce the energy consumption, balance the energy consumption between nodes, but also prolong the network lifetime.     

The Impact of Deployment Pattern and Routing Scheme on the Lifetime in Multi-Sink Wireless Sensor Network

Extensive use of sensor and actuator networks in many real-life applications introduced several new performance metrics at the node and network level. Since wireless sensor nodes have significant battery constraints, therefore, energy efficiency, as well as network lifetime, are among the most significant performance metrics to measure the effectiveness of given network architecture. This work investigates the performance of an event-based data delivery model using a multipath routing scheme for a wireless sensor network with multiple sink nodes. This routing algorithm follows a sink initiated route discovery process with the location information of the source nodes already known to the sink nodes. It also considers communication link costs before making decisions for packet forwarding. Carried out simulation compares the network performance of a wireless sensor network with a single sink, dual sink, and multi sink networking approaches. Based on a series of simulation experiments, the lifetime aware multipath routing approach is found appropriate for increasing the lifetime of sensor nodes significantly when compared to other similar routing schemes. However, energy-efficient packet forwarding is a major concern of this work; other network performance metrics like delay, average packet latency, and packet delivery ratio are also taken into the account.

     

An Energy-Efficient Routing Protocol for Event-Driven Dense Wireless Sensor Networks

The routing energy efficiency of a wireless sensor network is a crucial issue for the network lifetime. In this article, we propose MICRO (MInimum Cost Routing with Optimized data fusion), an energy-efficient routing protocol for event-driven dense wireless sensor networks. The proposed routing protocol is an improvement over the formerly proposed LEACH and PEGASIS protocol, which is designed to be implemented mainly with node computations rather than mainly with node communications. Moreover, in the routing computation the proposed scheme exploits a new cost function for energy balancing among sensor nodes, and uses an iterative scheme with optimized data fusions to compute the minimum-cost route for each event-detecting sensor node. Compared to the PEGASIS routing protocol, MICRO substantially improves the energy-efficiency of each route, by optimizing the trade-off between minimization of the total energy consumption of each route and the balancing of the energy state of each sensor node. It is demonstrated that the proposed protocol is able to outperform the LEACH and the PEGASIS protocols with respect to network lifetime by 100–300% and 10–100%, respectively.     

Analysis of energy-tax for multipath routing in wireless sensor networks

Recently, multipath routing in wireless sensor networks (WSN) has got immense research interest due to its capability of providing increased robustness, reliability, throughput, and security. However, a theoretical analysis on the energy consumption behavior of multipath routing has not yet been studied. In this paper, we present a general framework for analyzing the energy consumption overhead (i.e., energy tax) resulting from multipath routing protocol in WSN. The framework includes a baseline routing model, a network model, and two energy consumption schemes for sensor nodes, namely, periodic listening and selective wake-up schemes. It exploits the influence of node density, link failure rates, number of multiple paths, and transmission environment on the energy consumption. Scaling laws of energy-tax due to routing and data traffic are derived through analysis, which provide energy profiles of single-path and multipath routing and serve as a guideline for designing energy-efficient protocols for WSN. The crossover points of relative energy taxes, paid by single-path and multipath routing, reception, and transmission, are obtained. Finally, the scaling laws are validated and performance comparisons are depicted for a reference network via numerical results.     

Load Balancing Technique for Congestion Control Multipath Routing Protocol in MANETs

A mobile ad hoc network (MANET) is a collection of wireless mobile nodes that can communicate without a central controller or fixed infrastructure. Due to node mobility, designing a routing protocol to provide an efficient and suitable method to route the data with less energy consumption, packet drop and to prolong the network lifetime has become a challenging issue in MANETs. In MANETs, reducing energy consumption and packet loss involves congestion control and load balancing techniques. Thus, this paper introduces an efficient routing technique called the multipath load balancing technique for congestion control (MLBCC) in MANETs to efficiently balance the load among multiple paths by reducing the congestion. MLBCC introduces a congestion control mechanism and a load balancing mechanism during the data transmission process. The congestion control mechanism detects the congestion by using an arrival rate and an outgoing rate at a particular time interval T. The load balancing mechanism selects a gateway node by using the link cost and the path cost to efficiently distribute the load by selecting the most desirable paths. For an efficient flow of distribution, a node availability degree standard deviation parameter is introduced. Simulation results of MLBCC show the performance improvements in terms of the control overhead, packet delivery ratio, average delay and packet drop ratio in comparison with Fibonacci sequence multipath load balancing, stable backbone-based multipath routing protocol and ad hoc on demand multipath distance vector routing. In addition, the results show that MLBCC efficiently balances the load of the nodes in the network.

     

基于位置感知和代理的WSN多径路由方案

针对无线传感器网络(WSN)中多径路由的可靠性和能量效率问题,提出了一种基于代理和位置感知的多径路由发现方案(LABMR).事件节点根据位置信息,动态寻找其到Sink节点之间的特殊中间节点,来构建多径路由.利用移动代理来收集多径路由的局部拓扑结构信息,Sink节点根据代理收集的路由参数来计算路径权值,以此选择最优不相交路径.同时,对于信息的重要性差异,Sink节点选择单条或多条路径来传输数据,在保证传输可靠性的同时减少能耗.与现有的基于代理的多径路由(ABMR)方法相比,LABMP在数据包投递率、能量消耗、额外开销和延迟方面具有更好的性能.     

EOMR: An Energy-Efficient Optimal Multi-path Routing Protocol to Improve QoS in Wireless Sensor Network for IoT Applications

The wireless sensor network based IoT applications mainly suffers from end to end delay, loss of packets during transmission, reduced lifetime of sensor nodes due to loss of energy. To address these challenges, we need to design an efficient routing protocol that not only improves the network performance but also enhances the Quality of Service. In this paper, we design an energy-efficient routing protocol for wireless sensor network based IoT application having unfairness in the network with high traffic load. The proposed protocol considers three-factor to select the optimal path, i.e., lifetime, reliability, and the traffic intensity at the next-hop node. Rigorous simulation has been performed using NS-2. Also, the performance of the proposed protocol is compared with other contemporary protocols. The results show that the proposed protocol performs better concerning energy saving, packet delivery ratio, end-to-end delay, and network lifetime compared to other protocols.

     

RETT-gen: A globally efficient routing protocol for wireless sensor networks by equalising sensor energy and avoiding energy holes

Wireless sensor networks are composed of a large number of sensor nodes with limited energy resources. Once deployed, the sensor nodes are usually inaccessible to the user, and thus replacement of the energy resource is not feasible. Hence, energy efficiency is a key design issue that needs to be enhanced in order to improve the life span of the entire network. Several routing protocols have been proposed to improve the effective lifetime of the network with limited energy supply. In this paper, we propose routing based on energy–temperature transformation, RETT-gen, a scalable energy-efficient clustering and routing protocol designed for wireless sensor networks. The main goal of RETT-gen is to evenly distribute the energy load among all the sensor nodes in the network so that there are no overly-utilized sensor nodes that will run out of energy before the others. To achieve this goal, RETT-gen uses heat conductivity as a metaphor and uses the heat dissipation difference equations. In RETT-gen, we transform the expected lifetime of each sensor node to an equivalent temperature, and then by using the heat dissipation equations, we find the hottest path for sending data to the base station, which will not always be the shortest path. We evaluate the performance of the RETT-gen protocol via simulations, and compare it to the performance of well-known routing protocols (i.e. LEACH [W. Heinzelman, A. Chandrakasan, H. Balakrishnan, Energy-efficient communication protocol for wireless microsensor networks, in: Proceedings of the 33rd Hawaii International Conference on System Sciences (HICSS’00), 2000.] and EEUC [C. Li, M. Ye, G. Chen, J. Wu, An energy-efficient unequal clustering mechanism for wireless sensor networks, in: Proceedings of the International IEEE Conference on Mobile Adhoc and Sensor Systems (MASS), 2005.]). Simulation results show that by equalizing the sensor nodes energy, RETT-gen insures that the lifetime of the entire sensor network is maximized, the connectivity in a sensor network is maintained for as long as possible, and that the residual energy of the entire network is of the same order.