电流模式高阶滤波器设计的递推方法

给出了连续时间电流模式高阶滤波器的一种实现方法，该方法根据电流转移函数的分母多项式，以递推形式，逐步确定各个积分器的时间常数。用该方法设计所用电流镜数目少。对一个六阶滤波器的计算机仿真显示，该方法适合于设计高频电流模式滤波器。     

基于CC多输入单输出电流模式滤波器

为了实现结构简单、便于集成的三输入单输出电流模式滤波器,提出了三输入单输出电流模式滤波器的信号流图。用CC(第二代电流传输器)及多端输出的电流镜实现了该信号流图,得到一个由CC及电流镜共同构成的电流模式滤波器。该滤波器由2个CC、1个三端输出的电流镜及4个RC元件构成,能方便地实现5种滤波器输出。该滤波器可用于通信、电子测量与仪器仪表中的信号处理。硬件实验结果表明提出的电路是正确的。     

基于CCⅡ多输入单输出电流模式滤波器

为了实现结构简单、便于集成的三输入单输出电流模式滤波器,提出了三输入单输出电流模式滤波器的信号流图。用CCⅡ（第二代电流传输器）及多端输出的电流镜实现了该信号流图,得到一个由CCⅡ及电流镜共同构成的电流模式滤波器。该滤波器由2个CCⅡ、1个三端输出的电流镜及4个RC元件构成,能方便地实现5种滤波器输出。该滤波器可用于通信、电子测量与仪器仪表中的信号处理。硬件实验结果表明提出的电路是正确的。     

电流模式RLC梯形滤波器的设计与改进

为了使滤波器的性能更接近于理想滤波器,提出了一种基于电流模式的RLC梯形滤波器改进型设计方法,该方法引入了可实现的电流差分缓冲放大器（CDBA）,因而特别适用于电流模式以及连续时间滤波器的设计。文中同时给出了用Pspice进行的仿真结果。     

电流模式全极点跳耦结构滤波器

本文给出了电流模式CCII基本电路模块,讨论了用基本模块实现跳耦CCII滤波器的电路结构和设计方法。该电路具有低灵敏度特性,适于实现全集成连续时间滤波器。     

电流模式N阶CDBA-RC通用滤波器的系统设计

该文提出了利用电流差分缓冲放大器CDBA(the Current Differencing Buffered Amplifier)实现n阶电流模式滤波器的方法。基于信号流图给出了系统的设计公式,并举例设计了5阶Butterworth低通、高通及4阶Butterworth带通滤波器。PSPICE仿真表明,结果与理论分析完全吻合。该滤波器不仅电路结构简单,而且用的元件数目很少。     

一种高阶电流模式滤波器的系统设计方法

提出了一种通用高阶电流模式滤波器系统综合设计理论和方法,该方法将高阶通用电流模式滤波器的传递函数分解为n个无损积分器级联的形式.文章给出了基于MOCCCII实现的高阶通用电流模式滤波器,电路结构简单,仅由n 1个有源器件和接地电容构成.通过改变输入电流的接入方式和接入数目就可以实现不同类型的滤波功能.面向实际电路完成Pspice仿真.     

用CCII回转器设计梯形结构电流模式滤波器

该文提出一种设计高阶CCⅡ(第二代电流传输器)电流模式滤波器的新方法,即用CCⅡ回转器综合电流模式无源梯形网络的输入导纳,从而设计出高阶电流模式CCⅡ滤波器。用该方法设计出的电路与其它同类电路比较,电路结构简单、所使用的CCⅡ数目少。文中对CCⅡ的非理想特性进行了分析,提出了对CCⅡ的非理想特性进行补偿的方案。文中给出了六阶巴特沃斯滤波器的设计举例及补偿前和补偿后的计算机PSPICE仿真结果。     

一种基于OTA和MOCCII实现的n阶多功能滤波器

提出了一种基于运算跨导放大器和第二代电流传输器结合的电流模式多功能滤波器方法。该方法是将高阶通用电流模式滤波器的传递函数分解为n个无损积分器级联的形式,适当选定输入电流信号可同时实现低通、高通、带通、带阻等滤波功能,而电路内部结构及器件数目无需改变。与同类电路相比,其设计简便、结构简单、无源元件全部接地,且易于集成。同时文中还给出了滤波器的设计实例,Pspice仿真结果与理论分析相吻合,也验证了该方法的可行性。该滤波器可用于通信、电子测量与仪器仪表的信号处理中。     

电流模式全极点跳耦结构滤波器

本文给出了电流模式ＣＣＩＩ基本电路模块，讨论了用基本模块实现跳耦ＣＣＩＩ滤波器的电路结构和设计方法，该电路具有低灵敏度特性，适于实现全集成连续时间滤波器。     

Systematic Generation of Current-Mode Linear Transformation Filters Based on Multiple Output CCIIs

A transformation called current-mode linear transformation (CMLT) and its filter applications using multiple output second-generation current conveyors (MOCCIIs) are presented. The systematic method is developed to realize CMLT MOCCII-based filters efficiently. Based on the proposed design tables, we can synthesize high-order current-mode all-pole and elliptic filters with MOCCIIs, grounded resistors and capacitors. Moreover, the high-frequency elliptic filter can also be efficiently realized by adding capacitors to the relative all-pole filter, although floating capacitors are needed. Third-order Chebychev and elliptic lowpass filters are described in this paper. Experimental results that confirm the theoretical analysis are obtained. Furthermore, the proposed circuits can be extended to higher-order filters.     

高阶全极点CCII低通滤波器的设计

提出了一种利用第二代电流传送器CCII（Second Generation Current Conveyor）和多端输出电流传送器MOCC（Multiple Outputs Current Conveyor）实现的高阶全极点电流模式低通滤波器。给出了系统的设计公式,并举例设计了一个五阶Butterworth低通滤波器,通过PSPICE仿真,得出的结论与理论分析完全吻合。此低通滤波器不仅电路结构简单,而且用的元器件数目较少。     

电流模式CMOS OTA滤波器实现

本文提出了利用CMOS OTA综合连续时间电流模式滤波器的方法。应用信号流图模拟,系统地生成了二阶CMOS OTA电流滤波器。分析了OTA的非理想因素对滤波器高频性能的影响,并给出了简单的高频补偿方案。最后,给出了一个四阶巴特沃思低通滤波器的设计实例并经PSPICE仿真证实。     

Realization of current-mode high-order filters employing multiple output OTAs

Current-mode linear transformation (CMLT) high-order filters with minimum number of multiple output operational transconductance amplifiers (MOOTAs) are presented. Based on proposed design methods, we can synthesize current-mode high-order all-pole filters with minimum number of MOOTAs and all grounded capacitors efficiently. Moreover, high-frequency canonical CMLT elliptic filters with minimum number of MOOTAs and floating capacitors are also presented. Our proposed filters have the following merits: simplified design procedures, minimum number of active elements and simple design equations. Two design examples are demonstrated in this paper. Experimental results that confirm the theoretical analysis are provided.     

Current-mode continuous-time filters using complementary current mirror pairs

A design of current-mode continuous-time filters for low voltage and high frequency applications using complementary bipolar current mirror pairs is presented. The proposed current-mode filters consist of simple bipolar current mirrors and capacitors and are quite suitable for monolithic integration. Since the filters are based on the integrator type of realization, the proposed method can be used for a wide range of applications. The frequency of the filters can easily be changed by the DC controlling current. A fifth-order Butterworth and a third-order leapfrog filter with tunable cutoff frequencies from 20 MHz to 100 MHz are designed as examples and simulated by SPICE using standard bipolar parameters.     

Current-Mode Universal Filters Using Current Conveyors: Classification and Review

Several current-mode universal filters are reviewed. The filters are classified in two classes. The class I filters have floating passive elements, whereas class II filters have all resistors and capacitors grounded. Each class of filters includes two subclasses based on the filter’s capability to have independent control of the filter quality factor or not. The effects of nonideal second generation current conveyors are briefly discussed. Spice simulations using BSIM3 version 3.1 parameters, feature size 0.5 μm from MOSIS, are given, and a detailed comparison table is included.     

Current mode multifunction filter using two CDBAs

This paper presents a cascadable current-mode (CM) multifunction biquadratic filter. The proposed circuit realizes all five different filter transfer functions employing only two current differencing buffered amplifiers (CDBAs), while previously reported CM multifunction filters require more CDBAs and more passive component count for the same number of filter transfer function realizations. Examples for different filter transfer functions are given along with the results of circuit simulations. It is shown that theoretical and simulation results are in good agreement.     

差分式CMOS连续时间电流模式滤波器

提出了基地电流镜电路的差分式连续时间电流模式积分器，并用此积分器构成了全差分式连续时间电流模式低通及带通滤波器，分析并模拟了所提出的积分器及滤波器的特性，结果表明所提出了电路的具有结构简单，对称性好，失真小等优点，适于全集成。     

Second Order Band-Pass Filter Design Using Single CC-CDBA

Six new second order band-pass filter configurations using only a single current-controlled current differencing buffered amplifier (CC-CDBA) are proposed. Further, the proposed filters also have a minimum number of external electronic components. They realize current-mode, voltage-mode and transadmittance-mode filter characteristics. The quality factor and natural frequency can be adjusted electronically without changing the values of the passive components. The proposed filters use a minimum number of passive elements (two or three). There is no second order active filter structure which uses two passive components and one active component in the literature. The validity of the proposed filters is verified through PSpice simulations.