Analytic modeling of a solar power plant with parabolic linear collectors

An analytic model for a solar thermal electric generating system with parabolic trough collectors was developed. The energy conversion of solar radiation into thermal power along the absorber tube of the parabolic collector is studied, taking into consideration the non-linearity of heat losses and its dependence on the local temperature. The coupling between the collector and the thermodynamic cycle is made up of three heat exchangers, yielding the characteristic temperatures of the cycle. The conventional Rankine cycle is treated as an endo-reversible Carnot cycle, whereby the mechanical and electric power is calculated. For comparison, we refer to the Solar Electric Generating System VI (SEGS VI), installed in the Mojave desert-CA, whose solar field is composed by LS2 parabolic trough collectors. We simulated the efficiency curves of collectors LS2 with evacuated and non-evacuated absorbers and compared with experimental results. A second simulation was carried out to estimate the optimum quantity of non-evacuated LS2 collectors in series in a collectors’ row, when friction losses along the absorber tubes are considered. Also, the performance of a 30 (MWe) power plant, composed of 50 rows with 16 LS2 collectors in series (total 800 collectors) was simulated. Three fields of different collectors were considered, the first field with evacuated absorbers, the second with non-evacuated absorbers and the third with bare absorbers. Finally, the output power of the plant is analyzed as a function of the evaporation temperature of the water-vapor fluid. A large maximum of the overall cycle efficiency is found for evaporation temperatures around 320 °C. Good agreement is obtained when comparing the results of this model with experimental data belonging to the Solar Electric Generating Systems (SEGS) installed in the Mojave desert. The analytic model developed combines simplicity, precision and flexibility, making it an attractive tool for simulation and design of solar power stations.     

Simulation study of a large scale line-focus trough collector solar power plant in Greece

This paper deals with the technical feasibility and economic viability of a solar thermal power plant using parabolic trough collectors in Greece. The power plant is to be installed in the island of Rhodes and its power output will be 8.55 MW. Power plant simulation is carried out using TRNSYS software (STEC library) and economic issues of the project such as initial cost of investment, operation and maintenance (O&M) and energy costs will be analyzed. It was found that for the particular investment, considering a 75% of initial investment cost loan (with a 10-year period), the payback period will be approximately 13 years.     

A new TRNSYS component for parabolic trough collector simulation

This study describes and evaluates a new simulation component for parabolic trough collectors (PTCs). The new simulation component is implemented in the TRNSYS software environment by means of new Type that is suitable for integration into the calculation of a whole concentrating solar thermal plant, in order to evaluate the energy production of a PTC. The main advantage of the new Type is that is derived from experimental data available on efficiency Test Reports, according to the current European and International standards, rather than the theoretical approach considered in the existing parabolic trough component of TRNSYS library. The performance of the new Type has been validated with real experimental data obtained from the DISS solar test loop in Plataforma Solar de Almería, Spain. The paper describes the modelling approach, presents the comparison of simulation results with measurements taken at the DISS facility and evaluates the results.     

Energy performance enhancement of solar thermal power plants by solar parabolic trough collectors and evacuated tube collectors-based preheating units

Solar steam power plant is the dominant technology in the category of solar thermal power systems. In steam power cycles, there is usually a couple of steam lines, extracted from medium-pressure and low-pressure turbines, to preheat the working fluid before the boiler. This although leads to an increase in the energy efficiency of the cycle, reduces the contribution of the turbine proportionally. Therefore, finding an alternative method of preheating the working fluid would be effective in further enhancement of the efficiency of the system. In this study, the feasibility of using solar collectors for the preheating process in a solar steam power plant is investigated. For this, parabolic trough solar collectors and evacuated tube solar collectors based on a wide range of different scenarios and configurations are employed. The plant is designed, sized and thermodynamically analyzed for a case study in Saudi Arabia where there is a large solar irradiation potential over the year. The results of the simulations show that, among all the considered scenarios, a power cycle aided by a set of parabolic trough collectors as the preheating unit is the best choice technically. This configuration leads to about 23% increased power generation rate and 6.5% efficiency enhancement compared to the conventional design of the plant.     

Modelling of parabolic trough direct steam generation solar collectors

Solar electric generation systems (SEGS) currently in operation are based on parabolic trough solar collectors using synthetic oil heat transfer fluid in the collector loop to transfer thermal energy to a Rankine cycle turbine via a heat exchanger. To improve performance and reduce costs direct steam generation in the collector has been proposed. In this paper the efficiency of parabolic trough collectors is determined for operation with synthetic oil (current SEGS plants) and water (future proposal) as the working fluids. The thermal performance of a trough collector using Syltherm 800 oil as the working fluid has been measured at Sandia National Laboratory and is used in this study to develop a model of the thermal losses from the collector. The model is based on absorber wall temperature rather than fluid bulk temperature so it can be used to predict the performance of the collector with any working fluid. The effects of absorber emissivity and internal working fluid convection effects are evaluated. An efficiency equation for trough collectors is developed and used in a simulation model to evaluate the performance of direct steam generation collectors for different radiation conditions and different absorber tube sizes. Phase change in the direct steam generation collector is accounted for by separate analysis of the liquid, boiling and dry steam zones.     

Solar aided power generation of a 300 MW lignite fired power plant combined with line-focus parabolic trough collectors field

Nowadays, conventional coal or gas fired power plants are the dominant way to generate electricity in the world. In recent years there is a growth in the field of renewable energy sources in order to avoid the threat of climate change from fossil fuel combustion. Solar energy, as an environmental friendly energy source, may be the answer to the reduction of global CO₂ emissions. This paper presents the concept of Solar Aided Power Generation (SAPG), a combination of renewable and conventional energy sources technologies. The operation of the 300 MW lignite fired power plant of Ptolemais integrated with a solar field of parabolic trough collectors was simulated using TRNSYS software in both power boosting and fuel saving modes. The power plant performance, power output variation, fuel consumption and CO₂ emissions were calculated. Furthermore, an economic analysis was carried out for both power boosting and fuel saving modes of operation and optimum solar contribution was estimated.     

Automatic control of a 30 MWe SEGS VI parabolic trough plant

For the 30 MWe SEGS VI parabolic trough collector plant, one task of a skilled plant operator is to maintain a specified set point of the collector outlet temperature by adjusting the volume flow rate of the heat transfer fluid circulating through the collectors. For the development of next generation SEGS plants and in order to obtain a control algorithm that approximates an operator’s behavior, a linear model predictive controller is developed for use in a plant model. The plant model is discussed first in this work. The performance of the controller is evaluated for a summer and a winter day. The influence of the control on the gross output of the plant is examined as well.     

Modeling and simulations of a micro solar power system

In this paper, the mathematical modeling and simulations of a concentrating solar power system located at the Middle East Technical University Northern Cyprus Campus are presented. The system consists of parabolic trough collectors (PTCs), a propane boiler, an organic Rankine cycle (ORC), and a wet cooling tower. Presently, the PTC field is severely undersized with respect to the ORC making the system impossible to operate without burning significant propane. Expanding the solar field could result in better system performance. Hourly, daily and seasonal variations in the performance of this system are simulated using hourly meteorological data for Larnaca, Cyprus, over an entire year. Because the ORC is driven using a relatively low‐temperature heat source rather than PTCs, the usage of nonconcentrating evacuated tube collectors that collect both beam and diffuse radiation is explored. The performance of east–west and north–south–tracking axis PTCs and the entire inventory of nonconcentrating evacuated tube collectors that were rated by the Solar Rating and Certification Corporation are compared in terms of annual performance metrics. Based on the simulations, several nonconcentrating evacuated tube collectors are identified with better thermal performance than PTCs, and the feasibility of using these collectors should be explored further. Copyright © 2013 John Wiley & Sons, Ltd.     

Economic analysis of power generation from parabolic trough solar thermal plants for the Mediterranean region—A case study for the island of Cyprus

In this work a feasibility study is carried out in order to investigate whether the installation of a parabolic trough solar thermal technology for power generation in the Mediterranean region is economically feasible. The case study takes into account the available solar potential for Cyprus, as well as all available data concerning current renewable energy sources policy of the Cyprus Government, including the relevant feed-in tariff. In order to identify the least cost feasible option for the installation of the parabolic trough solar thermal plant a parametric cost–benefit analysis is carried out by varying parameters, such as, parabolic trough solar thermal plant capacity, parabolic trough solar thermal capital investment, operating hours, carbon dioxide emission trading system price, etc. For all above cases the electricity unit cost or benefit before tax, as well as after tax cash flow, net present value, internal rate of return and payback period are calculated. The results indicate that under certain conditions such projects can be profitable.     

Comparison of the optics of non-tracking and novel types of tracking solar thermal collectors for process heat applications up to 300 °C

Evacuated CPC (compound parabolic concentrator) collectors with non-tracking reflectors are compared with two novel tracking collectors: a parabolic trough and an evacuated tube collector with integrated tracking reflector. Non-tracking low concentrating CPC collectors are mostly mounted in east–west direction with a latitude dependent slope angle. They are suitable at most for working temperatures up to 200–250 °C. We present a tracking evacuated tube-collector with a trough-like concentrating mirror. Single-axis tracking of the mirror is realized with a magnetic mechanism. The mirror is mounted inside the evacuated tube and hence protected from environmental influences. One axis tracking in combination with a small acceptance angle allows for higher concentration as compared to non-tracking concentrating collectors. Ray-tracing analysis shows a half acceptance angle of about 5.7° at geometrical concentration ratio of 3.2. Losses of well constructed evacuated tube collectors (heat conductivity through the manifolds inside the thermally insulated terminating housing are low) are dominated by radiation losses of the absorber. Hence, reducing the absorber size can lead to higher efficiencies at high operating temperature levels. With the presented collector we aim for operating temperatures up to 350 °C. At temperatures of 300 °C we expect with anti-reflective coating of the glass tube and a selective absorber coating efficiencies of 0.65. This allows for application in industrial process heat generation, high efficient solar cooling and power generation. A first prototype, equipped with a standard glass tube and a black paint absorber coating, was tested at ZAE Bayern. The optical efficiency was measured to be 0.71. This tube-collector is compared by ray-tracing with non-tracking market available tube-collectors with geometrical concentration ratios up to 1.1 and with a low cost parabolic trough collector of Industrial Solar Technology (IST) with an acceptance half angle about 1.5°, a geometrical concentration ratio of 14.4 and a measured optical efficiency of 0.69.     

槽式太阳能热发电在浑善达克沙地的应用可行性分析

使用太阳能发电模拟软件SAM3.0.3.0对在浑善达克沙地建造50MW槽式太阳能热发电站进行可行性分析。对该热电站在不同系统组合条件下的运行状况进行模拟。分析了太阳能辐射强度、地理位置、蓄热设备容量、冷却方式和辅助能源等因素对该类型电站经济性的影响。模拟结果表明:在浑善达克沙地建立50MW槽式热发电站(6h蓄热,水冷,天然气辅助热源)的上网电价可达到0.727$/kWh,另外,单位集热面积每年可减排CO2307kg。     

Control scheme for direct steam generation in parabolic troughs under recirculation operation mode

Electricity production using solar thermal energy is one of the main research areas at present in the field of renewable energies, these systems being characterised by the need of reliable control systems aimed at maintaining desired operating conditions in the face of changes in solar radiation, which is the main source of energy. A new prototype of solar system with parabolic trough collectors was implemented at the Plataforma Solar de Almería (PSA, South-East Spain) to investigate the direct steam generation process under real solar conditions in the parabolic solar collector field of a thermal power plant prototype. This paper presents details and some results of the application of a control scheme designed and tested for the recirculation operation mode, for which the main objective is to obtain steam at constant temperature and pressure at the outlet of the solar field, so that changes produced in the inlet water conditions and/or solar radiation will only affect the amount of steam produced by the solar field. The steam quality and consequently the nominal efficiency of the plant are thus maintained.     

A control procedure for the elimination of mal flow rate distribution in evaporating flow in parallel pipes

Solar power plants that are based on an array of parallel parabolic trough solar collectors currently use oil as the heated fluid. Direct steam generation (DSG) has the potential of being a more efficient and less costly process owing to the elimination of oil as an indirect secondary heating medium and the elimination of heat exchanges and extra equipment needed for the transfer of heat from oil to water/steam.Unfortunately the use of DSG may possess problems regarding undesired flow distribution among the parallel pipes as well as possible flow instabilities. In this work we propose a control procedure that can adjust the flow rate in each of the parallel pipes to a desired quality at the pipes exit.     

Exergy analysis of an integrated solar combined cycle system

Exergetic analysis has become an integral part of thermodynamic assessment of any power generation system. Energy and exergy studies for power plants optimum design and for combined chemical industries received much attention recently. An Integrated Solar Combined Cycle System (ISCCS) is proposed as a means of integrating a parabolic trough solar thermal plant with modern combined cycle power plants. In this study attempt will be made to analyze the Integrated Solar Combined Cycle in Yazd, Iran using design plant data. Energy and exergy analysis for the solar field and combined cycle is carried out to assess the plant performance and pinpoint sites of primary exergy destruction. Exergy destruction throughout the plant is quantified and illustrated using an exergy flow diagram, and compared to the energy flow diagram. The causes of exergy destruction in the plant include: losses in combustor, collector, heat exchangers, and pump & turbines which accounts for 29.62, 8.69, 9.11 and 8% of the total exergy input to the plant, respectively. Exergetic efficiencies of the major plant components are determined in an attempt to assess their individual performances.     

Solar cooling system using concentrating collectors for office buildings: A case study for Greece

On a European level there is intense research activity to broaden the applications of solar thermal systems beyond their established domains (hot water, space heating support) and to foster their participation in the energy maps of the EU-Member States. Concentrated Solar Thermal (CST) systems are expected to play a key role in this effort, especially for achieving the medium and high temperatures needed, for electricity generation, for industrial applications but also for hybridized solar heating/cooling and desalination applications.This paper presents a proposal for implementation of a CST system in the building sector, based on a research carried out in the Laboratory of Environmental and Energy Efficient Design of Buildings and Settlements at the University of Thrace. Specifically, an integrated solar cooling system using parabolic trough solar collectors and double-effect chiller is discussed, used to cover the cooling needs of typical office building in Greece.As it was shown, the use of concentrating solar collectors leads to significantly higher output temperatures that can enable the use of two stage absorption chillers with a higher COP. Alternatively, when low or medium temperature heat is required, the use of CST systems takes less space to cope with it than traditional flat plate collectors. The combination of these parameters can contribute to removing key barriers associated with the broader diffusion of solar cooling technology, enhancing the potential to become more competitive to the conventional air conditioning technologies.     

Analysis of internal helically finned tubes for parabolic trough design by CFD tools

This paper has analysed the effect of the utilization of internal finned tubes for the design of parabolic trough collectors with computational fluid dynamics tools. Our numerical approach has been qualified with the computational estimation of reported experimental data regarding phenomena involved in finned tube applications and solar irradiation of parabolic trough collector. The application of finned tubes to the design of parabolic trough collectors must take into account features as the pressure losses, thermal losses and thermo-mechanical stress and thermal fatigue. Our analysis shows an improvement potential in parabolic trough solar plants efficiency by the application of internal finned tubes.     

Transient performance of direct steam generation solar power plants

Parabolic trough power plants are currently the most commercial systems for electricity generation. In this study, a transient numerical simulation of a solar power plant was developed by using direct steam generation (DSG) technology. In this system, condensate water from a Rankine cycle is pumped directly to solar parabolic trough collectors. The pressurized water is heated and evaporated before being superheated inside the solar collectors and directed back to the steam turbines, where the Rankine cycle is a reheated‐regenerative cycle. The plant performance with saturated steam production is compared with the performance of a superheated plant. A mathematical model of each system component is presented, with the solar power cycle modeled by the TRNSYS‐17 simulation program. Annual transient performance, including plant power and efficiency, is presented for both plants. As expected, the power of the superheated plant outperforms the saturated plant by approximately 45%, whereas the efficiency decreases by approximately 10%. Furthermore, the power of such plants is considerably improved under the weather of Makkah, 22.4°N, and it is approximately 40 MW for both the spring and autumn seasons. The annual generated energy is approximately 8062 MWh. The levelized electricity cost (LEC) was estimated for both the DSG and the corresponding synthetic oil plants. The DSG plant has an approximately 3% higher LEC than a synthetic oil plant with heat storage and an approximately 11.2% lower LEC than an oil plant if the plant has no storage. Copyright © 2016 John Wiley & Sons, Ltd.     

Technical and economical analysis of a solar–geothermal hybrid plant based on an Organic Rankine Cycle

A combined concentrating solar power system and a geothermal binary plant based on an Organic Rankine Cycle (ORC) is analyzed. Given a supercritical ORC, designed for the optimal utilization of an intermediate enthalpy geothermal source, a solar parabolic trough field was included in the plant, introducing an additional high temperature heat source for the cycle and increasing power production. The off-design performance analysis of the power cycle was performed first. An hour-by-hour simulation was then carried out to estimate the yearly production using a detailed solar field model. Finally, a differential economic analysis was performed to determine the cost of the additional electricity generated with the solar source. On the basis of the current cost of solar collectors, levelized costs of electricity of 145-280 €/MWh were obtained depending on the location of the plant: a competitive value with respect to large, stand-alone concentrating solar power plants.     

Study of thermal characteristics of a heating module with parabolic trough concentrator and linear wedge-like photoelectric receiver

New solar modules intended for typical solar collectors containing semiparabolic trough concentrators and receivers that convert solar energy into thermal energy are considered. Mathematical modeling is carried out to develop an algorithm for estimating the structure of a heating module with the assigned energy parameters according to the laws of geometrical optics, as well as heat and mass transfer. When using such modules, which are based on a parabolic concentrator and a receiver with a system of coolant flow, cogeneration plants can be designed to produce electricity and heat. The mockups developed using this procedure are studied on the corresponding facilities and are tested under in-situ conditions. A solar module with an asymmetric parabolic trough concentrator and a linear wedge-like photoelectric receiver of concentrated radiation with a system of coolant flow provides the maximum power of 386 W at a temperature of 40°C and an efficiency of 60%, and 319 W at 60°C and 49%, respectively. Such modules are proposed for use to design solar collectors with the required performance.     

Organic Rankine Cycle coupling with a Parabolic Trough Solar Power Plant for cogeneration and industrial processes

Over the last 25 years solar power plants based on parabolic trough concentrators have been developed for the commercial power industry. On the other hand, in recent years, a way to harness the solar energy is to cogenerate through Concentrated Solar Power (CSP) technology coupled to an Organic Rankine Cycle (ORC) with potential applications to industrial processes. In this work we present a study of a small CSP plant coupled to an ORC with a novel configuration since useful energy is directly used to feed the power block and to charge the thermal storage. In order to analyze this novel configuration we consider a case study with cogeneration applied to textile industrial process at medium temperature. It turns out that this configuration reduces the size of the thermal storage disposal. The performance of the solar power plant was simulated with TRNSYS to emulate real operating conditions. We show the design, study and simulation results, including the production and efficiency curves for our load profile. Our results show that our system is a promising option for applications to medium temperature processes where electrical and heat generation is required.