共查询到20条相似文献,搜索用时 421 毫秒
1.
2.
3.
4.
5.
6.
凝胶注模成型制备BaNd2Ti5O14介电陶瓷的电学性能 总被引:2,自引:0,他引:2
讨论了用凝胶注模成型制备BaNd2Ti5O14介电陶瓷的过程。本实验以化学式为BaNd2Ti5O14的介电陶瓷为固相粉末,以丙烯酰胺(MBAM)为凝胶有机单体,用传统球磨的方法制备出了高固相、低粘度的陶瓷浆料(浓悬浮体);采用正交实验设计法,优化出生坯密度最大的配方。分析了凝胶注模成型与干压成型制备的BaNd2Ti5O14介电陶瓷的体积密度、结构均匀性以及电学性能不同的原因。结果表明:凝胶注模成型制备的BaNd2Ti5O14介电陶瓷具有体积密度高、结构均匀的特点。合理使用凝胶注模成型工艺可以提高陶瓷介电常数、降低介质损耗。 相似文献
7.
8.
9.
10.
以Al2O3/Y2O3为烧结助剂,对凝胶注模SiC陶瓷进行了研究。讨论了埋粉组成和烧结温度对SiC陶瓷的烧成质量损失、线收缩、密度以及相组成的影响。当埋粉组成为SiC/Al2O3/Y2O3,在1950℃氮气氛中烧结1h时,制备了98%理论密度的SiC陶瓷。与传统的干压成型方法相比,凝胶注模成型工艺制备的SiC陶瓷坯体具有更高的烧成质量损失。 相似文献
11.
12.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
13.
我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉 相似文献
14.
15.
16.
利用组件技术开发化工原理实验课件,给出了系统层、组件库层和应用层的架构划分。重点讨论了组件库的设计,给出了流体阻力这一典型实验的实现描述。实践证实,基于组件技术可以提高仿真实验的开发效率。 相似文献
17.
以F类粉煤灰为例,详细介绍了测定粉煤灰中烧失量的步骤、计算数学模型、影响测量不确定度的因素以及各项测量不确定度分量评定,人员、设备、材料、方法、环境都是影响测量不确定的因素。 相似文献
19.
The miscibility of various amorphous polybutadienes with mixed microstructures of 1,4 addition units (cis, 1,4 and trans 1,4) and 1,2 addition units have been investigated. The studies here involved optical transparency, differential scanning calorimetry, and small angle light scattering. It was found that a 90 percent (cis) 1, 4 addition polybutadiene was immiscible with high (91 percent) 1,2 addition polybutadiene. Reduction of the 1,2 content to 71 percent induced an upper critical solution temperature (UCST) with the cis 1,4 polymer. Polybutadienes with 50 percent and 10 percent 1,2 contents were miscible above the crystalline melting temperature of the cis 1,4 polybutadiene. Immiscibility of the 91 percent 1,2 addition polymer was also found with a 10 percent 1,2 polybutadiene. The latter polymer also exhibits an UCST with the 71 percent 1,2 polymer. The results are used to interpret the characteristics of blends of polybutadienes of varying microstructure. 相似文献
20.
Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969. 相似文献