共查询到20条相似文献,搜索用时 109 毫秒
1.
研究了乙醇回流法提取银杏叶总黄酮的工艺条件。通过单因素实验考察料液比、乙醇体积分数、提取时间、提取温度对银杏叶总黄酮提取率的影响,通过正交实验确定优化的提取工艺条件为:料液比1∶45(g∶mL)、乙醇体积分数50%、提取时间2.0h、提取温度70℃,在此条件下,银杏叶总黄酮提取率为0.918%。以优化的工艺条件为基础进一步运用微波辅助提取银杏叶总黄酮,发现在微波功率为640W时,采用间歇式提取,提取时间为15×10s,总黄酮提取率达到0.91%,接近传统方法提取3h的提取率。 相似文献
2.
超声波协助提取茶多酚的工艺研究 总被引:5,自引:0,他引:5
研究了在超声波协助下采用正交设计法优选茶多酚的提取工艺。结果表明,影响茶多酚提取率的最佳工艺条件为:浸提温度70℃;时间1.5 h;料液比20∶1;乙醇浓度70%。影响茶多酚含量的最佳工艺条件为:浸提温度80℃;时间1.5 h;料液比15∶1;乙醇浓度70%。这些结果为改善茶多酚的提取条件提供了实验基础。 相似文献
3.
4.
目的:优选半仿生法提取刺梨果渣黄酮的工艺条件。方法:采用单因素结合正交试验,考查乙醇体积分数、料液比、提取温度、提取时间对刺梨果渣黄酮提取率的影响。结果:半仿生法提取刺梨果渣中黄酮的最佳工艺条件为:乙醇体积分数60%、料液比1∶15(g∶mL)、提取温度80℃、提取时间分别是70,35,35 min,该工艺条件下刺梨果渣黄酮提取率为0.58%。结论:所建立的提取工艺操作简单、提取率高,可用于刺梨果渣中黄酮的提取,为综合开发刺梨加工副产物刺梨果渣提供了参考依据。 相似文献
5.
超声波强化提取荠菜中总生物碱的研究 总被引:5,自引:0,他引:5
采用超声波辅助提取法提取荠菜中总生物碱,考察了提取剂、料液比、提取时间、提取温度、超声波功率对生物碱提取率的影响.正交实验结果表明超声法的最佳提取条件为:乙醇体积分数为70%,料液比为1∶10,提取时间10 min,提取温度50℃,功率160 W. 相似文献
6.
7.
8.
9.
10.
11.
12.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
13.
我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉 相似文献
14.
15.
16.
利用组件技术开发化工原理实验课件,给出了系统层、组件库层和应用层的架构划分。重点讨论了组件库的设计,给出了流体阻力这一典型实验的实现描述。实践证实,基于组件技术可以提高仿真实验的开发效率。 相似文献
17.
以F类粉煤灰为例,详细介绍了测定粉煤灰中烧失量的步骤、计算数学模型、影响测量不确定度的因素以及各项测量不确定度分量评定,人员、设备、材料、方法、环境都是影响测量不确定的因素。 相似文献
19.
The miscibility of various amorphous polybutadienes with mixed microstructures of 1,4 addition units (cis, 1,4 and trans 1,4) and 1,2 addition units have been investigated. The studies here involved optical transparency, differential scanning calorimetry, and small angle light scattering. It was found that a 90 percent (cis) 1, 4 addition polybutadiene was immiscible with high (91 percent) 1,2 addition polybutadiene. Reduction of the 1,2 content to 71 percent induced an upper critical solution temperature (UCST) with the cis 1,4 polymer. Polybutadienes with 50 percent and 10 percent 1,2 contents were miscible above the crystalline melting temperature of the cis 1,4 polybutadiene. Immiscibility of the 91 percent 1,2 addition polymer was also found with a 10 percent 1,2 polybutadiene. The latter polymer also exhibits an UCST with the 71 percent 1,2 polymer. The results are used to interpret the characteristics of blends of polybutadienes of varying microstructure. 相似文献
20.
Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969. 相似文献