相移掩模方法及其一维数值模拟

相移掩模方法是一种新的光刻技术，它可以提高现有光刻设备的分辨率，使超大规模集成电路及二元光学的制作迈上一个新台阶。本文介绍了相移掩模方法的基本原理，用部分相干光成象理论分析了用于光刻的投影照相系统的成象特性，导出了一维成象的简化公式，对一维光栅结构进行了计算机数值模拟并给出了模拟结果。     

掩模投影成像干涉光刻研究

掩模投影成像干涉光刻技术以在很小或几乎不增加光刻系统成本的基础上来提高光刻分辨率为目的,充分利用系统的有限孔径,将掩模图形不同的空间频率分别进行传递,最终以高分辨率对掩模成像。本文阐述了IIL的基本原理,介绍了一种实验系统,并给出了部分模拟和实验结果。研究结果表明,掩模投影成像干涉光刻技术比传统投影光刻能够得到更高的光刻分辨率。     

用于KrF准分子激光光刻的衰减相移掩模

讨论了相移掩模提高光刻分辨力的基本原理,提出了一种抗蚀剂相移器制作衰减相移掩模的新方法,利用自行设计、建立的KrF准分子激光投影光刻实验曝光系统进行了实验研究,给出了实验结果,并与传统光刻方法作了比较.     

用于KrF准分子激光光刻的三相移掩模

讨论了相移掩模提高光刻分辨力的基本原理,提出了一种抗蚀剂相移器制作衰减相移掩模的新方法,利用自行设计、建立的ＫｒＦ准分子激光投影光刻实验曝光系统进行了实验研究,给出了实验结果,并与传统光刻方法作了比较。     

用于100nm节点ArF准分子激光光刻的相移掩模技术

用于100nm节点ArF准分子激光光刻的相移掩模(PSM)技术主要有无铬相移掩模(CPM),交替相移掩模(APSM)、衰减相移掩模(AttPSM)和混合相移掩模技术。对这些掩模的基本原理、制作方法及性能比较进行了分析研究。研究表明,无铬相位光刻(CPL)PSM和高透AttPSM 相结合构成的混合掩模最适合用于193nmArF光刻,以产生100nm节点抗蚀剂图形。     

相移掩模和离轴照明在ArF浸没式光刻中对工艺窗口的影响

研究了交替型相移掩模及离轴照明对65nm分辨率ArF浸没式光刻的影响,在3／4环形照明和3／4四极照明方式下,分别选用传统掩模和交替型相移掩模,研究65nm线宽的密集线条、半密集线条、孤立线条在较大的曝光系统参数范围内,对光刻工艺窗口的改善。并对在不同的照明方式、掩模结构下获得的工艺窗口进行了比较,结果表明：①在较大焦深(DOF)范围内,满足光刻性能要求可以有较大范围的曝光系统参数配置;②相时于传统照明和传统掩模,采用交替型相移掩模或者离轴照明,焦深均可提高100％-150％。     

衰减相移掩模光刻技术研究

论述了衰减相移掩模光刻技术的原理和曝光实验研究,给出了光刻曝光实验部分结果,并与我刻方法作了比较。     

相移掩模和光学邻近效应校正光刻技术

详细地论述了相移掩模提高光刻分辨力和改善焦深的原理。介绍了光学邻近效应校正方法、改善光刻图形质量的机理及邻近效应校正掩模的一些设计问题。     

45 nm分辨率增强技术优化

针对45nm节点的需求,系统分析和研究了该节点不同周期图形的成像规律,并采用了不同的分辨率增强技术进行对比研究,从中分析出最适合45nm不同周期图形的光刻方案.采用了传统的离轴照明技术及新照明方式进行对比,并结合交替式相移掩模、衰减式相移掩模及传统二元掩模进行分析,探讨了45nm节点不同周期图形的可实现性.通过优化光源参数,采用Y偏振,对比不同分辨率增强技术的组合,得出结论,采用双弧带照明,对于Y向Line/Speae图形,其焦深,对比度等参数均可满足45 nm节点需要.最后通过双底层抗反射层(DBARC)优化,减小了底层反射率,有效地降低了摇摆效应,提高了z向图形保真度.     

振幅分割无掩模激光干涉光刻的实现方法

无掩模激光干涉光刻中的分束方法一般有波前分割和振幅分割。研究和比较了振幅分割无 掩模激光干涉光刻方法和系统,包括振幅分割双光束干涉系统、三光束干涉系统、液浸式深紫外干涉系统及全自动干涉光刻系统。建立了双光束双曝光干涉光刻实验系统。模拟和实验结果表明,对点阵或孔阵图形,在同样的图形尺度下,无掩模干涉光刻比传统光刻简单得多。     

Insertion of triangulated surfaces into a meccano tetrahedral discretization by means of mesh refinement and optimization procedures

In this paper, we present a new method for inserting several triangulated surfaces into an existing tetrahedral mesh generated by the meccano method. The result is a conformal mesh where each inserted surface is approximated by a set of faces of the final tetrahedral mesh. First, the tetrahedral mesh is refined around the inserted surfaces to capture their geometric features. Second, each immersed surface is approximated by a set of faces from the tetrahedral mesh. Third, following a novel approach, the nodes of the approximated surfaces are mapped to the corresponding immersed surface. Fourth, we untangle and smooth the mesh by optimizing a regularized shape distortion measure for tetrahedral elements in which we move all the nodes of the mesh, restricting the movement of the edge and surface nodes along the corresponding entity they belong to. The refining process allows approximating the immersed surface for any initial meccano tetrahedral mesh. Moreover, the proposed projection method avoids computational expensive geometric projections. Finally, the applied simultaneous untangling and smoothing process delivers a high‐quality mesh and ensures that the immersed surfaces are interpolated. Several examples are presented to assess the properties of the proposed method.     

From Industry 4.0 to Research 4.0. Development of High Performance Fibers in the Light of Digitization

We associate a variety of innovations with the term ＂Industry 4.0＂. The pioneer of many 4.0 modifications forms the basisfor the trend towards the integrated di...     

The Research of Anti-Wear Properties of Organomolybdenum Compounds in the Engine Oils

A four-ball tester was used to evaluate the anti-wear performance of three kinds of organomolybdemun compounds in the engine oils, i. e., molybdenum dialkyldithiophosphate (MoDDP), molybdenum dialkyldithiocarbamate ( MoDTC), and sulphur and phosphorus freeorganomolybdeum (Molybdate). The results indicate that a low concentration of MoDDP doesn' t improve the anti-wear properties of the commercial engine oils, but a high concentration of MoDDP can obviously improve the anti-wear properties and the load-carrying capacity of the engine oils. MoDTC doesn' t improve the antiwear properties of the engine oils, but worsens the anti-wear properties of the oils. Signifi can timprove ment of frictional and wear characteristics is obtained with Molybdate added in the commercial engine oils and the formulated oils.     

Roman iron and steel: A review

ABSTRACT

The production of ferrous metal increased during the Roman Late Republican period, Principate and Empire. The direct bloomery process was used to extract the metal from its ores using slag-tapping and slag-pit furnaces. The fuel was charcoal and an air blast was introduced by bellows-operated tuyères. Iron formed as a bloom, often as a spongy mass of metal, which contained impurities from the smelting process, including unreacted ore, fuel, slag and fragments from the furnace walls, while the metal was often inhomogeneous with varied carbon contents. Blooms were either smithed directly into bars or ingots or they were broken up, which also allowed the removal of gross impurities and a selection of pieces with similar properties to be made. These could then be forge-welded together and formed into characteristically shaped ingots. Making steel in the furnace seems to have been achieved: it depended on the ore and the furnace and conditions within it. Surface carburization was also carried out. Iron and steel were used extensively in construction and for tools and weapons. Fire welding was often used to add pieces of steel to make the edges of tools and weapons, which could be heat-treated by quenching to harden them.     

Certification Institutions Expected to Update and Transfer Information on Present Standards

Standards are the basis for production enterprises to organize production, ex-factory inspection, trade (delivery) and technical exchanges, product certification, quality arbitration and supervision.……     

Flow calorimeter for enthalpy increment measurements on condensed gases

A flow calorimeter for enthalpy increment measurements on condensed gases is presented. A better knowledge of the properties of the liquefied natural gas is needed, and therefore a liquid loop has been designed for our flow calorimeter. The fluid loop in the calorimeter is designed in order to avoid the two-phase region, since two phases would give compositional disturbances in the measurements. The avoidance of the two-phase region is made possible by increasing the pressure of the test fluid after the measurement section, then heating the fluid at super-critical pressure past the critical point. Finally, the fluid is throttled to the low-pressure gas state at the inlet condition of the compressor that circulates the fluid. To perform the pressure increase, a new cryogenic pump has been designed. To evaluate the new equipment, measurements were taken on liquid ethane over the temperature range 146–256 K at pressure between 0.9 and 5.1 MPa.     

Synthesis of Alumina-Zirconia Nanocomposites by Solgel Process

Al₂O₃-ZrO₂ nanocomposites were developed starting with the solgel process. Composite alumina-zirconia nanopowders were synthesized from metallorganic precursors (Aluminium secondary butoxide and zirconium Iso propoxide) using the solgel process. The parameters affecting the synthesis—solvent, concentration of precursor, R/H ratio (i.e., dilution of water in solvent)—were varied as also the temperature and pH. BET and TEM were used to measure nanosize. Diffuse reflectance spectroscopy and also qualitative optical absorption led to identical particle size estimate. The variation of process parameters was used to study the effect and interdependence of process parameters. Artificial Neural Networks was used to rigorously analyze the process. Although this led to confirmation of interdependence of parameters, the presence of a single overwhelming solvent variable was also established. Then the optimal process was used to synthesize more nanopowder. To produce bulk nanocomposite the nanopowders were sintered by varying the temperature and time period. The sintered lithoids were probed with a vickers hardness tester to measure elastic modulus, hardness, and fracture toughness. The results showed high elastic modulus, modest hardness, and very high fracture toughness.     

Certification Becomes Important for the I Quality; and Safety Supervision of the Chinese Liquor Sector

The end of 2007, over 200 unit products of more than 80 Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits, beer, wine, yellow wine, fruit syrup wine and others, and cover over 80% of the national top-branded liquor products.……     

Deposition and Coating Properties on CVD Tungsten

Surface characterization and microstructure studies are performed on chemical vapor deposited (CVD) tungsten coating. There is about 2 μm thickness diffusion layer of tungsten in the molybdenum substrate. The thermal shock test shows tungsten coating has good adhesion with molybdenum substrate, but the elements of oxygen and carbon in the tungsten coating have the bad affection to the adhesion. The result of high-temperature diffusion experiment is the diffusion rate from molybdenum substrate to tungsten coating is faster.