DCT域HEVC帧内预测模式映射算法研究

高效视频编码(HEVC)算法支持的帧内预测模式扩展到了35种,使之可实现更精准的预测,从而取得更高的压缩率。通过分析图像数据DCT系数的特性,研究了DCT系数与帧内预测模式的映射关系,提出了一种DCT系数的分布特征与帧内预测模式间的映射方法,该方法可用于提高HEVC的编码速度。     

利用纹理结构的HEVC快速帧内模式选择算法

高性能视频编码（HEVC）是刚确立的最新一代的视频编码标准。对于帧内编码,HEVC最大的特点是采用了从64×64至8×8的编码单元划分和35种帧内预测模式,HEVC通过遍历所有的分块和帧内预测模式,选取最优的预测方式,这种帧内预测方式在提高预测精度的同时也大大增加了编码的计算复杂度。为了降低帧内预测的计算复杂度,HM2.0版以上的HEVC测试软件采用一种基于两步预测的快速帧内模式选择算法。在此基础上本文首先提出了一种基于纹理方向的快速粗选方案,减少参与计算的粗选模式数,进而提出基于结构相关的决策方法,利用同质图像区域的纹理相似性,减少参与率失真代价函数计算的候选模式数量,进一步降低了帧内预测计算复杂度。实验结果表明,本文所提出的快速算法,在保持编码质量基本不变的条件下,可以使基于两步预测的快速帧内模式选择时间缩短25%。      

基于模式分组的帧内预测模式快速选择算法

针对高效率视频编码(HEVC)帧内预测中增加的预测模式引起的的粗选择模式(RMD)与率失真优化(RDO)算法计算复杂度高的问题。本文充分利用候选模式集中排列第一的预测模式与最优预测模式之间的强相关性,提出了一种基于模式分组的帧内预测模式快速选择算法,有效的降低了HEVC帧内预测算法的计算复杂度。实验表明本文所提出的算法与HEVC的测试模型HM10.0相比,在保证视频质量和码率基本不变的前提下(码率仅增加了0.78%,Y-PSNR只降低了0.12dB),减少了41.8％的编码时间,提高了编码效率。     

基于邻近值的HEVC帧内预测优化

高性能视频编码(High Efficiency Video Coding,HEVC)标准中的帧内编码模式利用当前帧中像素点之间的空间相关性作出有效预测。为了解决待编码像素远离参考像素时预测不准确的问题,提出了一种基于邻近值的HEVC帧内预测优化算法。该算法的主要思想是,对于当前像素,先根据传统HEVC帧内编码方法得到其预测值,再使用该像素点左边、左上、上边位置的修正值以及该像素本身的预测值对该预测值进行修正。因为将当前像素与周围像素的相关性进行了有效的数学建模,所以HEVC帧内编码性能得到了提升。实验结果显示,所提算法与HEVC标准相比,最高节省了2.7%的码率,平均节省的码率为1.3%。     

一种HEVC快速帧内模式判断算法

针对HEVC帧内预测模式判断过程较为复杂的问题,提出了一种快速帧内模式判断算法.通过将35种帧内预测模式进行分级计算,利用其中17种模式即能得出最佳预测模式.实验结果表明,与参考编码算法相比,所提出的帧内模式判断算法可以降低约53％的计算量,且编码压缩率几乎不变.     

一种低复杂度的HEVC帧内快速编码算法

为了降低高效视频编码(HEVC)帧内编码复杂度,提出一种HEVC帧内快速编码算法。根据视频图像的纹理复杂性,提前跳过或者中止部分尺寸的编码单元(CU)的划分,减少CU深度遍历区间;同时,根据粗选过程后预测模式和代价值的统计特性采用阈值法或者梯度模式直方图法进一步筛选掉粗选后可能性较小的预测模式,从而减少最后进行率失真(RD)代价计算的帧内预测模式数量,进一步降低编码复杂度。实验结果表明,本文算法与HEVC原始平台相比,在全I帧编码模式下编码时间平均减少42.20%,码率(BR)上升约1.75%,峰值信噪比(PSNR)降低了0.108dB,有利于实时应用。     

HEVC帧内预测算法的优化

对最新视频编码标准HEVC的帧内预测算法作了分析,提出一种基于编码块的纹理特征和相邻已编码块深度的帧内预测快速算法。在全I帧模式下,该算法在HEVC校验模型(HM2.0)上的实验结果表明:在保证与原算法的性能相差不大的情况下,编码时间平均可以缩减29%。     

Optimization for HEVC Intra Prediction

对最新视频编码标准HEVC的帧内预测算法作了分析,提出一种基于编码块的纹理特征和相邻已编码块深度的帧内预测快速算法.在全I帧模式下,该算法在HEVC校验模型(HM2.0)上的实验结果表明:在保证与原算法的性能相差不大的情况下,编码时间平均可以缩减29％.     

基于AVS的变换域帧内转码研究

根据MPEG-2与先进音视频编码（AVS,Advanced Coding of Audio and Video）标准在帧内预测中的不同点,介绍了一种基于变换域的帧内预测转码算法。新算法提出一种新的变换域转码结构,通过矩阵变换计算出AVS帧内预测的各种模式所对应的离散余弦变换（DCT,Discrete Cosine Transform）预测矩阵,推导出DCT域到AVS整数变换域的系数转换矩阵,同时给出DCT域内预测矩阵转换所需的运算量。实验结果表明,提出的帧内预测转换方法可以使计算复杂度降低50%,达到实时转码的要求。     

新一代高效视频编码标准HEVC的技术架构

一、HEVC编码结构HEVC采用基于块的预测变换混合编码框架,在编码时,输八视频信号的每帧图像被划分成一定大小的编码块。编码器编码的第一帧（或者是随机切入点Random Access后的第一帧）一定是采用帧内预测,它利用帧内块区域空间相关性进行预测编码,而不需要参考其他任何视频帧。视频序列中剩余视频帧,则大多采用帧间预测模式进行编码。     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Nanoimprint Lithography -A Next Generation High Volume Lithography Technique

IntroductionNanoimprint Lithography is a well-acknowl-edged low cost, high resolution, large area pattern-ing process. It includes the most promising methods,high-pressure hot embossing lithography (HEL) [2],UV-cured imprinting (UV-NIL) [3] and micro contactprinting (m-CP, MCP) [4]. Curing of the imprintedstructures is either done by subsequent UV-lightexposure in the case of UV-NIL or by cooling downbelow the glass transition temperature of the ther-moplastic material in case of HEL…     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

Influence of PVK ： NPB hole transporting layer on the characteristics of organic light-emitting devices

A doping system consisting of NPB and PVK is employed as a composite hole transporting layer （CHTL）. By adjusting the component ratio of the doping system, a series of devices with different concentration proportion of PVK ： NPB are constracted. The result shows that doping concentration of NPB enhances the competence of hole transporting ability, and modifies the recombination region of charge as well as affects the surface morphology of doped film. Optimum device with a maximum brightness of 7852 cd/m^2 and a power efficiency of 1.75 lm/W has been obtained by choosing a concentration proportion of PVK ： NPB at 1：3.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.     

Analysis of error performance on Turbo coded FDPIM

Due to variable symbol length of digital pulse interval modulation（DPIM）, it is difficult to analyze the error performances of Turbo coded DPIM. To solve this problem, a fixed-length digital pulse interval modulation（FDPIM） method is provided. The FDPIM modulation structure is introduced. The packet error rates of uncoded FDPIM are analyzed and compared with that of DPIM. Bit error rates of Turbo coded FDPIM are simulated based on three kinds of analytical models under weak turbulence channel. The results show that packet error rate of uncoded FDPIM is inferior to that of uncoded DPIM. However, FDPIM is easy to be implemented and easy to be combined, with Turbo code for soft-decision because of its fixed length. Besides, the introduction of Turbo code in this modulation can decrease the average power about 10 dBm, which means that it can improve the error performance of the system effectively.     

A method for calculating the center position of collimated light

It is a key problem to accurately calculate beam spots＇ center of measuring the warp by using a collimated laser. A new method, named double geometrical center method （DGCM）, is put forward for the first time. In this method, a plane wave perpendicularly irradiates an aperture stop, and a charge couple device （CCD） is employed to receive the diffraction-beam spots, then the geometrical centers of the fast and the second diffraction-beam spots are calculated respectively, and their mean value is regarded as the center of datum beam. In face of such adverse instances as laser intension distributing defectively, part of the image being saturated, this method can still work well. What＇s more, this method can detect whether an unacceptable error exits in the courses of image receiving, processing and calculating. The experimental results indicate the precision of this method is high.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.